|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-14-2018, 05:05 PM
|
#1 |
|
Registered User
Join Date: Jun 2017
Location: Central illinois
Posts: 143
|
3in front drop and 2in rear
If I drop the front end of my 69 3in with springs, do I need new shocks?
And if I drop the back 2in with springs, do I need new shocks? I notice everybody drops the back more then the front. But if I go 3in in the front and 2in in the back, it will make the space between the fender and top of the tire the same. |
|
|
|
07-15-2018, 08:56 PM
|
#2 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: 3in front drop and 2in rear
Front yes on shocks and rear maybe. For most of us it is the overall attitude of the truck and not the distance from the tire to the wheel well. The overall stance is what makes or breaks it for me.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
07-17-2018, 05:34 PM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
|
Re: 3in front drop and 2in rear
3 inches with just springs is going to really limit the amount of travel you have. You will be bottoming out a lot I suspect. I would recommend looking at springs and spindles.
|
|
|
|
|
07-21-2018, 07:45 PM
|
#4 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: 3in front drop and 2in rear
Something seems off on your truck... They are always higher in the back than front if things are stock. I have a 71 GMC somebody heated and collapsed the rear coils on and it's STILL higher in the back...
Some trucks are OK with 3" springs, but some can't be aligned. If you really want to lower your truck, I would get a complete kit rather than trying to figure out what a PO cooked up. (F'd up?). On mine I went with ECE disc conversion and 5 lug axles so that I could actually have some wheels to choose from. The drop disc spindles are the best way to get the truck down IMO. 2 1/2" then you can play with springs to get what you want. 4 1/2" on my truck.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
07-21-2018, 08:45 PM
|
#5 | |
|
Registered User
Join Date: Jun 2017
Location: Central illinois
Posts: 143
|
Re: 3in front drop and 2in rear
Quote:
|
|
|
|
|
|
07-23-2018, 06:20 PM
|
#6 | |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: 3in front drop and 2in rear
Quote:
and alignment might be fun getting back in spec . as said do a combo . spindle and then the rest with a good spring . be better off in the end .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
|
|
07-27-2018, 07:45 AM
|
#7 |
|
Registered User
Join Date: Jul 2018
Location: Little River, SC
Posts: 105
|
Funny to see this thread. The other night im out working on my truck so I grabbed a tape measure. The previous owner put drop spindles on the front but stock out back. My truck also measures just 2” needed in the rear to make matching clearance. Not sure if the drop spindles are 2 or 2.5”.
Posted via Mobile Device |
|
|
|
|
07-27-2018, 07:46 AM
|
#8 |
|
Registered User
Join Date: Jul 2018
Location: Little River, SC
Posts: 105
|
Re: 3in front drop and 2in rear
But i would get new springs, whats 80-100 when your already going through all of the trouble of swapping springs
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
