1959 turn signal cancel

[2001convertable]

Hi, just took my steering wheel off to access the turn signal switch. It was intermittently giving my problems with my stop lights. Well I found a loose screw inside and I cleaned the mechanical mechanism that operates the switch and lubed it. It seems to be working great now but my question is does a 1959 turn signal have a canceling option or do you have to turn them off after a turn? thanks

[mikebte]

My old stock set up canceled. Took a picture of what my old one looked like. It's scrap, so good timing.

[2001convertable]

Mine is the same unit.Is there something that would tigger it to cancal on the steering wheel side? I have to remove the steering wheel and look again tomorrow.

[mikebte]

Originally Posted by 2001convertable

Mine is the same unit.Is there something that would tigger it to cancal on the steering wheel side? I have to remove the steering wheel and look again tomorrow.

Mine at one point would not work, I found the turn signal housing was sliding down the steering shaft and causing this issue. I move the turn signal housing upward and held it in place with a hose clamp, worked fine since.

[2001convertable]

Thanks Mike, Im trying to figure out what the housing looks like and where to install a hose clamp. Thank you for your patience.

[mikebte]

Originally Posted by 2001convertable

Thanks Mike, Im trying to figure out what the housing looks like and where to install a hose clamp. Thank you for your patience.

It was a long time ago, I was unaware that the housing has a screw that secures it the the steering shaft, but I was in a hurry and placed a hose clamp around the steering shaft to hold the turn signal housing up close to the steering wheel.

You can test yours by wrapping you hands around the turn signal housing and seeing if it moves, if its loose, that is an issue.

[2001convertable]

Mike, that was it. Perfect, I pulled up and it came up and works great now. Thank you so very much