CA 1972 K10 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brianhill6 · 08-18-2018, 09:16 AM

I do not have time to part this out. Would like to sell it as a whole. This is a good parts suburban. Has minimal rust in rockers. Does not have any interior, or drive train. Has a 14 bolt full floater rear axle. Barn doors are in great shape. Front doors are good as well, expect for the speaker holes cut in them. Have a hood, but no radiator support, or grill. I had started a Cummins 12 valve swap, but just don’t have time to continue the project. Cummins seen in front picture is not included. $2000 and willing to work with auto shipper.

Brianhill6 · 08-27-2018, 07:39 PM

Nobody interested? Soon I will be removing the doors and just take it to the scrap yard. I don’t have time to part it out.

harrisoncole4 · 08-27-2018, 08:03 PM

Would hate to see this go to the scrapper. Too bad i live on the other side of the country

**dozerbill72** · 08-27-2018, 08:22 PM

Does it have a title?

Brianhill6 · 08-27-2018, 10:16 PM

It does not. It came out of Montana. California is just to hard to get a title on a vehicle. I could provide a bill of sale

**1968k20** · 08-28-2018, 06:46 AM

What engine is in it?

Brianhill6 · 08-28-2018, 08:48 AM

Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

**1968k20** · 08-28-2018, 10:28 AM

Quote:

Originally Posted by Brianhill6

Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

What year is the engine? How much for the engine?

**1968k20** · 08-28-2018, 10:29 AM

Also price for barn doors

Brianhill6 · 08-28-2018, 11:09 AM

Not exactly sure what year the engine is. It is a p pump engine. I would let the engine go for $3000 with the adapter. Adapter alone was $1000. I’ll have to think about the barn doors

JMC3178 · 08-28-2018, 11:21 AM

I don't have a need for the whole vehicle, but if you are going to scrap it let me know and I can take a couple parts off your hands.

Brianhill6 · 08-28-2018, 10:53 PM

What do you need?

ManNamedJed · 08-30-2018, 11:15 AM

I'd be interested in the side trim if you do decide to part out.

**1968k20** · 08-30-2018, 02:09 PM

Would you take $1500 for whole thing and I'll pick

Brianhill6 · 08-30-2018, 04:20 PM

Without the engine and trans yes I would

bets licea · 09-12-2018, 12:52 AM

Interested in both passenger side doors, hinges and "B" pillar.

08-18-2018, 09:16 AM	#1
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	1972 K10 Suburban I do not have time to part this out. Would like to sell it as a whole. This is a good parts suburban. Has minimal rust in rockers. Does not have any interior, or drive train. Has a 14 bolt full floater rear axle. Barn doors are in great shape. Front doors are good as well, expect for the speaker holes cut in them. Have a hood, but no radiator support, or grill. I had started a Cummins 12 valve swap, but just don’t have time to continue the project. Cummins seen in front picture is not included. $2000 and willing to work with auto shipper. Attached Images

08-27-2018, 07:39 PM	#2
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Nobody interested? Soon I will be removing the doors and just take it to the scrap yard. I don’t have time to part it out.

08-27-2018, 08:03 PM	#3
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: 1972 K10 Suburban Would hate to see this go to the scrapper. Too bad i live on the other side of the country __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

08-27-2018, 08:22 PM	#4
dozerbill72 Senior Member Join Date: Oct 2015 Location: Berryville Arkansas Posts: 402	Re: 1972 K10 Suburban Does it have a title?

08-27-2018, 10:16 PM	#5
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban It does not. It came out of Montana. California is just to hard to get a title on a vehicle. I could provide a bill of sale

08-28-2018, 06:46 AM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban What engine is in it? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-28-2018, 08:48 AM	#7
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

08-28-2018, 10:29 AM	#9
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban Also price for barn doors __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-28-2018, 11:09 AM	#10
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Not exactly sure what year the engine is. It is a p pump engine. I would let the engine go for $3000 with the adapter. Adapter alone was $1000. I’ll have to think about the barn doors

08-28-2018, 11:21 AM	#11
JMC3178 Registered User Join Date: Aug 2016 Location: Fresno, CA Posts: 6	Re: 1972 K10 Suburban I don't have a need for the whole vehicle, but if you are going to scrap it let me know and I can take a couple parts off your hands.

08-28-2018, 10:53 PM	#12
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban What do you need?

08-30-2018, 11:15 AM	#13
ManNamedJed Registered User Join Date: May 2018 Location: Reno, NV Posts: 232	Re: 1972 K10 Suburban I'd be interested in the side trim if you do decide to part out.

08-30-2018, 02:09 PM	#14
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban Would you take $1500 for whole thing and I'll pick __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-30-2018, 04:20 PM	#15
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Without the engine and trans yes I would

09-12-2018, 12:52 AM	#16
bets licea Registered User Join Date: Jan 2008 Location: chino,california Posts: 16	Re: 1972 K10 Suburban Interested in both passenger side doors, hinges and "B" pillar.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.