What does this Iine do - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 08-27-2018, 03:08 PM

And where or what do I hook it up to on my 67 c10 ls conversion? It's a 2003 dbw and the line I'm talking about is attached to the housing on top of the engine in front of the manifold with the green tab on it. It runs parralel with the fuel lines. Help is appreciated!!!

Jstock85 · 08-27-2018, 03:11 PM

That may be the EVAP line. I deleted that on mine.

Rich84 · 08-27-2018, 03:14 PM

That's for the evap. You don't need it. You can leave it in the manifold or get or make a block off for it.

**michael bustamante** · 08-27-2018, 04:30 PM

cool thanks guys. im gonna cut and plug it then

Jstock85 · 08-27-2018, 09:42 PM

ICT billet makes a block off kit on amazon. You can get EVAP and EGR block plates together

ls1nova71 · 08-28-2018, 08:14 AM

If you're putting the Vortec cover back on, you can just take the line off the solenoid. Its normally closed so as long as it doesn't have power going to it it will be blocked off assuming the solenoid is good of course.

**michael bustamante** · 08-28-2018, 06:50 PM

can I just cut it off with a razor?

ls1nova71 · 08-28-2018, 10:05 PM

Quote:

Originally Posted by michael bustamante

can I just cut it off with a razor?

I suppose you could, but it would be easier to just push the little white tab on the fitting (on the driver's side) and then pull strait up and the line will come off.

08-27-2018, 03:08 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	What does this Iine do And where or what do I hook it up to on my 67 c10 ls conversion? It's a 2003 dbw and the line I'm talking about is attached to the housing on top of the engine in front of the manifold with the green tab on it. It runs parralel with the fuel lines. Help is appreciated!!! Attached Images __________________ 1967custom

08-27-2018, 03:11 PM	#2
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: What does this Iine do That may be the EVAP line. I deleted that on mine.

08-27-2018, 03:14 PM	#3
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,692	Re: What does this Iine do That's for the evap. You don't need it. You can leave it in the manifold or get or make a block off for it.

08-27-2018, 04:30 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: What does this Iine do cool thanks guys. im gonna cut and plug it then __________________ 1967custom

08-27-2018, 09:42 PM	#5
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: What does this Iine do ICT billet makes a block off kit on amazon. You can get EVAP and EGR block plates together

08-28-2018, 08:14 AM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: What does this Iine do If you're putting the Vortec cover back on, you can just take the line off the solenoid. Its normally closed so as long as it doesn't have power going to it it will be blocked off assuming the solenoid is good of course. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

08-28-2018, 06:50 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: What does this Iine do can I just cut it off with a razor? __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.