2918 Concors De Maryhill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 10-07-2018, 02:18 AM

We took off a bit late and headed to the Maryhill Museum at Maryhill Wa above the Columbia river for the Concours De Maryhill. While it does attract some really interesting classics the event is an open car show where you can enter just about anything if you have the entry fee.

Highlight of the day was seeing our own Hogfarm and his truck again and getting in some visiting time.

By the way Rich the name I was looking for on those radius rods on the rat rod next to your truck was "hairpin radius rods" My hurting foot must have affected my brain too. plantar fasciitis isn't fun when you are trying to walk around a car show.

The red stepside was the only other GM truck in the event, Rich had driven down in the rain from his home this morning and the rain kept a lot of vehicles at home in the garage. I met a Mustang club with late model Mustangs on the pass on the way down but don't know if they were at the show or not.

**mr48chev** · 10-07-2018, 05:18 PM

As the pickings were slim here are the three blue oval trucks that were there.

The white one I couldn't get a good shot of because the people belongs to one of Hogfarms friends and sits on a complete Crown Vic chassis. Rich helped him wire up the engine's electronics.

The other two are just well done trucks that looked great sitting out on he lawn.

**mr48chev** · 10-07-2018, 05:39 PM

Just for fun, For the guys trying to figure out if an LS will fit your truck how would you like to be the guy who stuffed this dual overhead Vauxhall engine in a Mini? That thing has some real bark to it too.

The little supercharged 4 banger flathead is in a 1923 Amilicar. The whole car was exceptionally well detailed and has been a vintage race car for years first on the east coast. The hood ornament on the Amilicar had it's own story. The previous owner made a trip to France where he purchased the ornament for 3500 a few years ago. The cars are racing today in the Maryhill Hill climb an annual event that a vintage race car club puts on. The race cars drive up from the pits for the race that is held on a hill that was the first stretch of paved highway in the state of Washington and was the main highway for years. It is closed except for a couple of events every year.

**mr48chev** · 10-07-2018, 05:47 PM

Name: IMG_1849.jpg
Views: 214
Size: 61.7 KB

The Amiicar leaving the grounds with the other hill climb cars to return to the race pits.

The black 61 Corvette has participated in the hill climb every year and is a full on 100 % road race and hill climb car with no street driving provisions and one nasty sounding small block that really barks.

**mongocanfly** · 10-07-2018, 07:50 PM

"2918 Concors De Maryhill..."
I always wondered what our trucks would look like 900 yrs from now.....now I know....haha...

**mr48chev** · 10-07-2018, 08:51 PM

Fixed it, I was more than a little bit tired when I got home last night. I hope I am not one of those old farts that needs an electric scooter to get around car shows but would have welcomed one yesterday.

1project2many · 10-07-2018, 09:06 PM

Very cool pictures. The Amilicar would have my attention for a loong time. That is just a wild little ride to see out driving and then racing.

I like the DOHC Mini swap. The C20XE was rated for about 150 hp at 6,000 rpm but it doesn't take much to get 200 hp out of them. That car must be a rocket.

Interesting to note is that the "Vauxhall" engine is available domestically in a few forms. A SOHC N/A version was found in GM J cars in the '80s and '90s in 1.8l and 2.0l sizes. It was also available as a turbocharged version. Strangely enough it was known as the "Brazilian" engine due to country of manufacture even though it was Opel designed. At the same time a SOHC version of the engine was sold here in the 89-93 Pontiac Lemans, which was really a rebadged Daewoo. After the SOHC engine, a DOHC version was available in Daewoo models in 1.6L, 1.8l, and 2.2L displacements. A 2.2L DOHC version was also available in the Isuzu Hombre in RWD configuration. Interestingly, the Daewoo engines have "GM Canada" cast in the block and the OBDII electronics included are all GM (except for the ignition system which is a Bosch style DIS). Look up GM Family II engine if you are ever curious.

**mr48chev** · 10-08-2018, 12:49 AM

You just saved me doing a search on it, thanks. I've seen the car about every year I have been down to the show and it just flat sounds mean. Pretty much like a hot super bike.

MiraclePieCo · 10-08-2018, 01:59 AM

Quote:

Originally Posted by mr48chev

My hurting foot must have affected my brain too. plantar fasciitis isn't fun when you are trying to walk around a car show.

I've had that before - it's a weird condition that can come and go for no apparent reason. I took some solace in the fact that I shared the malady with many top professional athletes.

That Amilicar has quite the rudimentary blower drive!

bobinbc · 10-08-2018, 02:59 AM

Thanks for posting the pics mr48chev. Love the trucks and the race cars, wish I could've heard 'em!

**hogfarm** · 10-08-2018, 05:13 AM

Once again mr48chevy did a nice job with the pictures,and it was a pleasure to see him there.

**mr48chev** · 10-09-2018, 03:24 AM

I enjoyed the visit and got a big kick out of your granddaughter, thought she was going to slug your buddy though. She was getting that serous "don't bad mouth grandpa's truck" look.

Jean said thanks again for the museum ticket, she really enjoyed it.

I like the variety, atmosphere and location for that event Plus you always get to see cars that you will never see any place else all year long.

For those that have Facebook here is the link to my album on the show, I haven't put it anywhere else yet but will get to that. https://www.facebook.com/rob.davison...4274905&type=3

**hogfarm** · 10-10-2018, 06:23 AM

Quote:

Originally Posted by mr48chev

I enjoyed the visit and got a big kick out of your granddaughter, thought she was going to slug your buddy though. She was getting that serous "don't bad mouth grandpa's truck" look.

Jean said thanks again for the museum ticket, she really enjoyed it.

I like the variety, atmosphere and location for that event Plus you always get to see cars that you will never see any place else all year long.

For those that have Facebook here is the link to my album on the show, I haven't put it anywhere else yet but will get to that. https://www.facebook.com/rob.davison...4274905&type=3

yes my granddaughter is quite out spoken.and she is just 6yr old

10-07-2018, 02:18 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	2018 Concors De Maryhill We took off a bit late and headed to the Maryhill Museum at Maryhill Wa above the Columbia river for the Concours De Maryhill. While it does attract some really interesting classics the event is an open car show where you can enter just about anything if you have the entry fee. Highlight of the day was seeing our own Hogfarm and his truck again and getting in some visiting time. By the way Rich the name I was looking for on those radius rods on the rat rod next to your truck was "hairpin radius rods" My hurting foot must have affected my brain too. plantar fasciitis isn't fun when you are trying to walk around a car show. The red stepside was the only other GM truck in the event, Rich had driven down in the rain from his home this morning and the rain kept a lot of vehicles at home in the garage. I met a Mustang club with late model Mustangs on the pass on the way down but don't know if they were at the show or not. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 10-07-2018 at 08:48 PM. Reason: Wrong year in title

10-07-2018, 05:18 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill As the pickings were slim here are the three blue oval trucks that were there. The white one I couldn't get a good shot of because the people belongs to one of Hogfarms friends and sits on a complete Crown Vic chassis. Rich helped him wire up the engine's electronics. The other two are just well done trucks that looked great sitting out on he lawn. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 05:39 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill Just for fun, For the guys trying to figure out if an LS will fit your truck how would you like to be the guy who stuffed this dual overhead Vauxhall engine in a Mini? That thing has some real bark to it too. The little supercharged 4 banger flathead is in a 1923 Amilicar. The whole car was exceptionally well detailed and has been a vintage race car for years first on the east coast. The hood ornament on the Amilicar had it's own story. The previous owner made a trip to France where he purchased the ornament for 3500 a few years ago. The cars are racing today in the Maryhill Hill climb an annual event that a vintage race car club puts on. The race cars drive up from the pits for the race that is held on a hill that was the first stretch of paved highway in the state of Washington and was the main highway for years. It is closed except for a couple of events every year. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 05:47 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill The Amiicar leaving the grounds with the other hill climb cars to return to the race pits. The black 61 Corvette has participated in the hill climb every year and is a full on 100 % road race and hill climb car with no street driving provisions and one nasty sounding small block that really barks. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 07:50 PM	#5
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 2918 Concors De Maryhill "2918 Concors De Maryhill..." I always wondered what our trucks would look like 900 yrs from now.....now I know....haha... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 10-07-2018 at 07:57 PM.

10-07-2018, 08:51 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill Fixed it, I was more than a little bit tired when I got home last night. I hope I am not one of those old farts that needs an electric scooter to get around car shows but would have welcomed one yesterday. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-07-2018, 09:06 PM	#7
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: 2918 Concors De Maryhill Very cool pictures. The Amilicar would have my attention for a loong time. That is just a wild little ride to see out driving and then racing. I like the DOHC Mini swap. The C20XE was rated for about 150 hp at 6,000 rpm but it doesn't take much to get 200 hp out of them. That car must be a rocket. Interesting to note is that the "Vauxhall" engine is available domestically in a few forms. A SOHC N/A version was found in GM J cars in the '80s and '90s in 1.8l and 2.0l sizes. It was also available as a turbocharged version. Strangely enough it was known as the "Brazilian" engine due to country of manufacture even though it was Opel designed. At the same time a SOHC version of the engine was sold here in the 89-93 Pontiac Lemans, which was really a rebadged Daewoo. After the SOHC engine, a DOHC version was available in Daewoo models in 1.6L, 1.8l, and 2.2L displacements. A 2.2L DOHC version was also available in the Isuzu Hombre in RWD configuration. Interestingly, the Daewoo engines have "GM Canada" cast in the block and the OBDII electronics included are all GM (except for the ignition system which is a Bosch style DIS). Look up GM Family II engine if you are ever curious.

10-08-2018, 12:49 AM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill You just saved me doing a search on it, thanks. I've seen the car about every year I have been down to the show and it just flat sounds mean. Pretty much like a hot super bike. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-08-2018, 02:59 AM	#10
bobinbc Registered User Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 576	Re: 2918 Concors De Maryhill Thanks for posting the pics mr48chev. Love the trucks and the race cars, wish I could've heard 'em! __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/

10-08-2018, 05:13 AM	#11
hogfarm Senior Member Join Date: Jan 2016 Location: Appleton Washington Posts: 592	Re: 2918 Concors De Maryhill Once again mr48chevy did a nice job with the pictures,and it was a pleasure to see him there.

10-09-2018, 03:24 AM	#12
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: 2918 Concors De Maryhill I enjoyed the visit and got a big kick out of your granddaughter, thought she was going to slug your buddy though. She was getting that serous "don't bad mouth grandpa's truck" look. Jean said thanks again for the museum ticket, she really enjoyed it. I like the variety, atmosphere and location for that event Plus you always get to see cars that you will never see any place else all year long. For those that have Facebook here is the link to my album on the show, I haven't put it anywhere else yet but will get to that. https://www.facebook.com/rob.davison...4274905&type=3 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.