Recommendations on Dirty Dingo Low mount AC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nobox351y · 10-18-2018, 01:52 PM

Has anyone used the Dirty Dingo Low mount AC bracket on a swap?

Got an 87 Suburban, dont believe the stock ac compressor is going to fit with the stock mount, looking for options to keep the compressor low.

Thanks for the help and suggestions.

Houston Ben · 10-18-2018, 10:26 PM

I have DD upper and not happy with it. It shakes bad at idle rpm when ac clutch engaged causing the puppy to vibrate bad. I put a turnbuckle on it which helped some. Don’t know about their lower.

sweetk30 · 10-21-2018, 10:37 AM

Quote:

Originally Posted by Houston Ben

I have DD upper and not happy with it. It shakes bad at idle rpm when ac clutch engaged causing the puppy to vibrate bad. I put a turnbuckle on it which helped some. Don’t know about their lower.

nice to know i am not the only one unhappy with his products and customer service attitude .

he screwed me over a few years ago on motor mounts .

nobox351y · 10-19-2018, 08:11 AM

Houston: What motor mounts did you use and why did you choose to move the AC compressor? I have the cheap adjustable conversion mounts set to put the engine in the stock location, Fairly certain the compressor is going to hit the mount and or stand.

87chevy.com · 10-19-2018, 11:31 AM

My 87 silverado used the stock 5.3 compressor and brackets no prob, standard motor mounts plates, stock mounts

**Wgesnerjr** · 10-21-2018, 09:49 AM

a/c Is my springtime project. Please post pics. I am in research mode.
thanks.

sprint_9 · 10-21-2018, 06:41 PM

I tried and sent back the DD low mount, the one I had would not square the compressor to the rest of the belt drive.

After that I went with the Holley low mount, it is much nicer. Built better and more importantly mounts everything square.

nobox351y · 10-22-2018, 01:37 PM

I used the ICT billet adapter mounts. That style of mount prevents you from being able to use the stock ac mount.

87chevy, got any pics?

87chevy.com · 10-23-2018, 02:05 PM

Quote:

Originally Posted by nobox351y

I used the ICT billet adapter mounts. That style of mount prevents you from being able to use the stock ac mount.

87chevy, got any pics?

Pic of it installed? I don't have that engine combo installed anymore, upgraded.

nobox351y · 10-24-2018, 10:41 AM

Yea, I was just hoping to see how the motor mounts and the ac mount looked next to one another.

Probably too late now though as I have everything back in and wont be changing the mounts.

10-18-2018, 01:52 PM	#1
nobox351y Registered User Join Date: May 2016 Location: LeRoy Posts: 69	Recommendations on Dirty Dingo Low mount AC Has anyone used the Dirty Dingo Low mount AC bracket on a swap? Got an 87 Suburban, dont believe the stock ac compressor is going to fit with the stock mount, looking for options to keep the compressor low. Thanks for the help and suggestions.

10-18-2018, 10:26 PM	#2
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: Recommendations on Dirty Dingo Low mount AC I have DD upper and not happy with it. It shakes bad at idle rpm when ac clutch engaged causing the puppy to vibrate bad. I put a turnbuckle on it which helped some. Don’t know about their lower. __________________ 1986 C10, 2011 5.3 w/6L80, 3.42 w/ Detroit TrutTrac Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584532

10-19-2018, 08:11 AM	#4
nobox351y Registered User Join Date: May 2016 Location: LeRoy Posts: 69	Re: Recommendations on Dirty Dingo Low mount AC Houston: What motor mounts did you use and why did you choose to move the AC compressor? I have the cheap adjustable conversion mounts set to put the engine in the stock location, Fairly certain the compressor is going to hit the mount and or stand.

10-19-2018, 11:31 AM	#5
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: Recommendations on Dirty Dingo Low mount AC My 87 silverado used the stock 5.3 compressor and brackets no prob, standard motor mounts plates, stock mounts __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

10-21-2018, 09:49 AM	#6
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: Recommendations on Dirty Dingo Low mount AC a/c Is my springtime project. Please post pics. I am in research mode. thanks. __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

10-21-2018, 06:41 PM	#7
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: Recommendations on Dirty Dingo Low mount AC I tried and sent back the DD low mount, the one I had would not square the compressor to the rest of the belt drive. After that I went with the Holley low mount, it is much nicer. Built better and more importantly mounts everything square.

10-22-2018, 01:37 PM	#8
nobox351y Registered User Join Date: May 2016 Location: LeRoy Posts: 69	Re: Recommendations on Dirty Dingo Low mount AC I used the ICT billet adapter mounts. That style of mount prevents you from being able to use the stock ac mount. 87chevy, got any pics?

10-24-2018, 10:41 AM	#10
nobox351y Registered User Join Date: May 2016 Location: LeRoy Posts: 69	Re: Recommendations on Dirty Dingo Low mount AC Yea, I was just hoping to see how the motor mounts and the ac mount looked next to one another. Probably too late now though as I have everything back in and wont be changing the mounts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.