CA LS1 long block engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mr_Rich** · 10-29-2018, 05:34 PM

I'm trying to sell my LS1 that I pulled from my '98 Pontiac Firebird. I installed an LS6 in the car. The LS1 has the take-off cast iron exhaust manifolds and full length Cadillac CTS/V oil pan and full length windage tray from that LS6 engine. I've advertised the engine price from $1950 to $1350. I'd still plan on using this engine except that my project plans changed and I no longer have my project car.

**Mr_Rich** · 10-30-2018, 01:58 PM

Sold

Macdaddy1 · 10-31-2018, 02:12 PM

How many miles and do you have the harness or other accessories?

**Mr_Rich** · 11-01-2018, 06:00 AM

Quote:

Originally Posted by Macdaddy1

How many miles and do you have the harness or other accessories?

The harness is part of the car I'm still driving. This was a take-out engine like I mentioned in the original post. It had over 100K on it but I maintained it with regular oil changes every 5K and it was my date car and touring car so I had a lot of freeway miles. I'd still use if I had a project to install it in.

**Mr_Rich** · 11-27-2018, 06:12 PM

Sold

10-29-2018, 05:34 PM	#1
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	CA LS1 long block engine I'm trying to sell my LS1 that I pulled from my '98 Pontiac Firebird. I installed an LS6 in the car. The LS1 has the take-off cast iron exhaust manifolds and full length Cadillac CTS/V oil pan and full length windage tray from that LS6 engine. I've advertised the engine price from $1950 to $1350. I'd still plan on using this engine except that my project plans changed and I no longer have my project car. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

10-30-2018, 01:58 PM	#2
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: CA LS1 long block engine Sold Attached Images __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C Last edited by Mr_Rich; 11-27-2018 at 06:12 PM.

10-31-2018, 02:12 PM	#3
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: CA LS1 long block engine How many miles and do you have the harness or other accessories?

11-27-2018, 06:12 PM	#5
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: CA LS1 long block engine Sold __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.