How much to powder coat wheels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72addict · 11-19-2003, 07:29 AM

Interested in having 4 16.5x8.25 wheels powder coated black. Anyone have an idea where and how much? Thanks

**JIMs70GMC** · 11-19-2003, 08:25 AM

Here in SE VA we have a company named Van Wynn that does all types of coatings, powder, ceramic etc... Have you looked in your local phone book? A friend of mine had a set of exhaust manifold ceramic coated for I believe $150 or maybe that's what he paid for the manifolds that were ceramic coated. I'll give them a call later today an get a price for powder coating rims, so you have something to compare to.

cdowns · 11-19-2003, 09:44 AM

around here the cost is between 60-100 each depending on condition

gonebad2 · 11-19-2003, 11:27 AM

I just had a radiator core support, 2 inner fenders and a few other small parts powdercoated and it was $379.00

gr8scott51 · 11-19-2003, 11:37 AM

5 ralleys = $250 in Kitsap County @ Kitsap Powder Coating.

paintpyro · 11-19-2003, 12:04 PM

I did four rallys in silver for 205. That included blasting, powdercoating, and a clearcoat

11-19-2003, 07:29 AM	#1
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	How much to powder coat wheels? Interested in having 4 16.5x8.25 wheels powder coated black. Anyone have an idea where and how much? Thanks __________________ 1957 Cameo

11-19-2003, 08:25 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Here in SE VA we have a company named Van Wynn that does all types of coatings, powder, ceramic etc... Have you looked in your local phone book? A friend of mine had a set of exhaust manifold ceramic coated for I believe $150 or maybe that's what he paid for the manifolds that were ceramic coated. I'll give them a call later today an get a price for powder coating rims, so you have something to compare to. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-19-2003, 09:44 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	around here the cost is between 60-100 each depending on condition __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-19-2003, 11:27 AM	#4
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	I just had a radiator core support, 2 inner fenders and a few other small parts powdercoated and it was $379.00 __________________ Your Bought And Sold....I Got Your Soul!

11-19-2003, 11:37 AM	#5
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	wheels 5 ralleys = $250 in Kitsap County @ Kitsap Powder Coating. __________________ Silence is golden, duct tape is silver. - Scott

11-19-2003, 12:04 PM	#6
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	I did four rallys in silver for 205. That included blasting, powdercoating, and a clearcoat __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.