plug wire question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 11-19-2003, 09:14 PM

About six months ago I put on spiro pro taylor wires. One wire thrid on drivers side boot started to melt. I emailed them and they replaced it for me. One month later it is starting to do it again. I have stock exhuast manifolds.

Do you guys think it is a leak in the manifold I cant really see it back there?

Any other thoughts?

Thanks

76bonanza · 11-20-2003, 09:40 AM

ttt

79BIG10 · 11-20-2003, 07:31 PM

It may be but I doubt it. Can you hear an exhaust leak? It would sound like a ticking near there.

bpmcgee · 11-20-2003, 07:53 PM

Did it start to melt on the part that is parallel to the plug or on the perpendicular part? If it's on the perpendicular part, try routing your wire further towards the back of the engine.

Alternately you could get one of those little kevlar boots. I have to have those for both #5 and #7 on my engine due to headers.

Brian

76bonanza · 11-20-2003, 08:25 PM

parallel part after clip could the plug be getting hot for some reason?

PHOENIX · 11-21-2003, 02:10 PM

Buy some socks (boots) to put on them, work good and look cool

toytruck · 11-21-2003, 02:34 PM

Maybe your timing is off. Or you are running a little lean. That would make your exhust manifolds hotter. Did you change anything else after the new wires? The boots do work nice too.

Grey 87 · 11-21-2003, 09:17 PM

Where did you get the little boots? I need some for the 84 in a couple of spots.

bpmcgee · 11-21-2003, 10:44 PM

I would suggest summit

Grey 87 · 11-21-2003, 10:47 PM

Thanks. I'll check it out.

Jason Spears · 11-22-2003, 11:37 PM

Are the heat sheilds still on the manifolds. When mine rusted and fell off I had the same problem.

11-19-2003, 09:14 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	plug wire question About six months ago I put on spiro pro taylor wires. One wire thrid on drivers side boot started to melt. I emailed them and they replaced it for me. One month later it is starting to do it again. I have stock exhuast manifolds. Do you guys think it is a leak in the manifold I cant really see it back there? Any other thoughts? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

11-20-2003, 09:40 AM	#2
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	ttt __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

11-20-2003, 07:31 PM	#3
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	It may be but I doubt it. Can you hear an exhaust leak? It would sound like a ticking near there. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

11-21-2003, 02:10 PM	#6
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Buy some socks (boots) to put on them, work good and look cool __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

11-21-2003, 09:17 PM	#8
Grey 87 Registered User Join Date: Aug 2003 Location: Texas Posts: 23	Where did you get the little boots? I need some for the 84 in a couple of spots. __________________ 87 SWB Silverado 84 LWB Custom Deluxe

11-20-2003, 07:53 PM	#4
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Did it start to melt on the part that is parallel to the plug or on the perpendicular part? If it's on the perpendicular part, try routing your wire further towards the back of the engine. Alternately you could get one of those little kevlar boots. I have to have those for both #5 and #7 on my engine due to headers. Brian

11-20-2003, 08:25 PM	#5
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	parallel part after clip could the plug be getting hot for some reason? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

11-21-2003, 02:34 PM	#7
toytruck 5-7 dropped 87 CC Dually Join Date: Sep 2003 Location: bay city mi Posts: 326	Maybe your timing is off. Or you are running a little lean. That would make your exhust manifolds hotter. Did you change anything else after the new wires? The boots do work nice too. __________________ I rather be in my 77 Sanger Picklefork Jet Hydro!

11-21-2003, 10:44 PM	#9
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	I would suggest summit

11-21-2003, 10:47 PM	#10
Grey 87 Registered User Join Date: Aug 2003 Location: Texas Posts: 23	Thanks. I'll check it out. __________________ 87 SWB Silverado 84 LWB Custom Deluxe

11-22-2003, 11:37 PM	#11
Jason Spears Registered User Join Date: Dec 2002 Location: Stoney Creek, ON Posts: 89	Are the heat sheilds still on the manifolds. When mine rusted and fell off I had the same problem.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.