GA Suburban rear half part out/cuts

[Madkidd007]

Do not private message me before inquiring in the thread.

Everything from the rear of the back doors is up for grabs. Rusted parts cut off and thrown out. As of right now I can ship out USPS on a daily basis, Bigger items are more difficult and may take a few days due to my work schedule. All rust or dents will be shown and circled. If you only need part of an item let me know and we’ll see if we can make a deal. Possible barter/trade for body parts that will help with my build

1
Rear hatch style sill plate, pinholes in center where barn doors would latch, seen better and worse but still intact and useable $60

[Madkidd007]

2
Passenger side lower window frame
$60

[Madkidd007]

3
Upper rear sill hatch style
$50

[Madkidd007]

Scrapped

[Madkidd007]

Scrapped


5
Driver side rear lower window frame
$50

[Madkidd007]

Scrapped


6
Passenger side tailgate latch/lower d-pillar
$60 With hardware
$35 Without hardware
$25 Hardware only, support bolt & latch receiver plate

[Madkidd007]

If you need more than one item I’ll make bundle discounts

[Madkidd007]

Open to offers, don’t wanna scrap something that someone could use

[Heliarcn]

Looking for all parts that bolt to the upper hatch. Bolts, hinges, covers, screws, chrome damper thing, and the latch catch thing next to the damper thing. Will you take $45 for all of it?

[Madkidd007]

Originally Posted by Heliarcn

Looking for all parts that bolt to the upper hatch. Bolts, hinges, covers, screws, chrome damper thing, and the latch catch thing next to the damper thing. Will you take $45 for all of it?

I can do that, should all fit in a medium flat rate so that’ll work. I’ll cut the skin away so I can spray the hinge bolts with wd40, worst case I’ll cut them loose and send it together. Paypal address is in my signature, I’m on nights this week so I should be able to get it out same or next day depending on when payment is sent.

[Heliarcn]

Originally Posted by Madkidd007

I can do that, should all fit in a medium flat rate so that’ll work. I’ll cut the skin away so I can spray the hinge bolts with wd40, worst case I’ll cut them loose and send it together. Paypal address is in my signature, I’m on nights this week so I should be able to get it out same or next day depending on when payment is sent.

Payment sent. Thanks, Bret

[Madkidd007]

Got it. Weather permitting I should be able to get it done tomorrow afternoon.

[Madkidd007]

Originally Posted by Heliarcn

Payment sent. Thanks, Bret

It’ll go out tomorrow. Post office was buried and I have to work tonight. All bolts came out clean, a couple will need to soak longer but did break loose no problem so I cut the sheet metal off so you can soak them some more

[Madkidd007]

A couple items have been updated

[Madkidd007]

Little update, have time now to separate things and ship bigger items if you can give me a few days

[DaHos]

PM sent, Need the inner housing that holds the rear backup housing

[Madkidd007]

This is all that is left of the reverse inner housings. Driver side is still in tact but the passenger side all that’s left is the actual light housing itself.

[Madkidd007]

Taking offers, reasonable offers that is

[Madkidd007]

Trim pics after a light Brillo pad

[Madkidd007]

Unfortunately I didn’t take this one off before cutting the body so it’s a little shorter than it’s supposed to be.

[Madkidd007]

Bump to offered.

[Madkidd007]

Can separate and ship by size and weight now.

[khoult]

I'm looking for two side/park light cutouts.

[Madkidd007]

Originally Posted by khoult

I'm looking for two side/park light cutouts.

I took two screenshots from posts 15 & 16. If you need both sides ill do my quotes $20 each for the cuts, I’ll ship them free if you don’t mind them being 11.5”x11.5” cuts. So it would be $40 shipped for the pair

[khoult]

Payment sent