![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
|
Gage cluster lens seal
I am in the process of reassembling my gauge cluster. In my new parts I have a seal that goes between the lens and a gauge. I am guessing it’s for the speedo gauge , which also help get it snug to the mounting tin.
Or is there some where else it goes ? |
![]() |
![]() |
![]() |
#2 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
I know of any gauge cluster for 67-72 that has a seal none.
The lens have the little sponge pieces about a inch long that should go around all the plastic in spots though. Are you talking about item #10? If so you cut it to fit in the slots in the plastic face on the inside where the lens will lay. If you lay the cluster face down you will see small slots around the outside of the gauges this is where the pieces go. Cut it to fit each one. ![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jun 2018
Location: Munising,Mi
Posts: 360
|
Re: Gage cluster lens seal
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|