NE 64-66 GMC Cab Big Window Part Out Power Brakes

[paulspickupparts]

Just had this come in . This has the big back window conversion piece . I would prefer to sell that piece locally as I just went thru the nightmare of shipping of a pair fenders . All other parts are priced plus shipping. Sorry for the double pricing but tired of the paypal fees. These parts will be going to Lincoln Nebraska swap meet the first part of March if not sold plus many other parts I have .

Rear Cab Big Window Coversion Piece . I will cut where you want it . No shipping on this item . $400
Power Brake Booster. I am selling this to be rebuilt. I will save all the mounting hardware I find upon removal . $200 Postal M.O. $250 Paypal
Dash Cut Out $100 Postal M.O or $125.00 Paypal
Complete Set of Custom Trim with Custom Emblems Few small dings in the door trim but good . Can get more photos $150 Postal M.O. $200.00 Paypal .

When weather warms up and before the swap meet the whole cab will get cut up .

[paulspickupparts]

pics

[vetnat]

Does it have windshield washers? If so, I'm looking for the knob, and possibly the whole wiper/washer motor. Thanks.

[paulspickupparts]

I do not think it had wipers with washers. If it does I will get back to you. Thanks

[paulspickupparts]

Originally Posted by paulspickupparts

I do not think it had wipers with washers. If it does I will get back to you. Thanks

I have a very complete washer system from a 65 Chevy Pickup. It would have the Chevy knob but pretty complete motor with pump hardware haness bottle holder etc .

[vetnat]

Originally Posted by paulspickupparts

I have a very complete washer system from a 65 Chevy Pickup. It would have the Chevy knob but pretty complete motor with pump hardware haness bottle holder etc .

Thanks for looking. Honestly, I would only need the motor with pump, how much are you asking?

[blazin71K5]

What would shipping on the custom trim pieces be to 75042, thanks

[paulspickupparts]

Originally Posted by blazin71K5

What would shipping on the custom trim pieces be to 75042, thanks

Hi shipping would be between $15 and $20 depending on how much they add for insurance . Shipping would be actual and could wait on payment until boxed for exact quote.

[tchevs]

I only need the pillar pieces of the custom trim so I’ll get second in line

[1968vetL-71]

I'll hop in line on the complete set of door trim. Shipping to 69101 North Plate, ne. Thanks

Also interested in the dash pending condition? rust ? pics? thanks

[paulspickupparts]

Originally Posted by 1968vetL-71

I'll hop in line on the complete set of door trim. Shipping to 69101 North Plate, ne. Thanks

Also interested in the dash pending condition? rust ? pics? thanks

Third in line. Thanks

[paulspickupparts]

Originally Posted by tchevs

I only need the pillar pieces of the custom trim so I’ll get second in line

You are second it line . This is for the complete set , Not seperating . I occaisionally get parts but for not I only have complete sets . Thanks

[blazin71K5]

Originally Posted by paulspickupparts

You are second it line . This is for the complete set , Not seperating . I occaisionally get parts but for not I only have complete sets . Thanks

I really only need the door window trim, would you allow me and the gentleman needing the pillar trim to split this up?

[tchevs]

I’m ok with splitting it up or buying all of it to get what I need if it gets to me.

[paulspickupparts]

Originally Posted by blazin71K5

I really only need the door window trim, would you allow me and the gentleman needing the pillar trim to split this up?

I would prefer one person would purchase the trim and split however they want. Reason being if one or the other buys part of it and the other backs out if turns into a mess . So for now you have first dibs on the whole setup. After you buy it you can split however you want. Thanks

[tchevs]

Paul that is understandable. Blazin, your call. I can buy the pillar stuff from you if you get it.

[Madmartigan]

Have any other parts in Palomino Tan? Hood?

[paulspickupparts]

Sorry no hood . Just the cab as shown . Thanks

[rickoner]

If you do end up cutting the cab, how's the area around the dimmer switch?

[paulspickupparts]

I can check on the dimmer area. About 10 degrees right now so probably will not cut for the next week or so. How big of area do you need ? Thanks

[rickoner]

Originally Posted by paulspickupparts

I can check on the dimmer area. About 10 degrees right now so probably will not cut for the next week or so. How big of area do you need ? Thanks

No worries on time. Just whenever you can get to it brother. I would like to find a piece that's from the left side (under kick panel seam) and maybe 2-3 inches around the switch recess.

[Pontitruck]

If it's a low hump cab I might be interested in part of the hump, mine has been modified.

[Pontitruck]

Originally Posted by Pontitruck

If it's a low hump cab I might be interested in part of the hump, mine has been modified.

Hi, was just wondering if you could help? Thanks

[paulspickupparts]

Originally Posted by Pontitruck

Hi, was just wondering if you could help? Thanks

Sorry , I missed this . This truck is a high hump but I have a low hump I am also parting. I might be able to help. Let me know how much area you need . Thanks

[Pontitruck]

Originally Posted by paulspickupparts

Sorry , I missed this . This truck is a high hump but I have a low hump I am also parting. I might be able to help. Let me know how much area you need . Thanks

Thanks Paul, I thought I was invisible for little bit there. The guy I got my project from was putting in a 5 spd so he grafted in a piece to raise it up even with the raised portio. I could use a section like the picture I've added. Let me know what you've got.

Thanks
Joe