Outer rocker panel replacement issue - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70sangersean · 02-20-2019, 12:42 PM

So I'm replacing my outer pass. side rocker and the issue I am having is when I line up the rocker edge with the door edge in the front, so its flush, I end up with a big gap between side of the front pillar and the rocker where it needs to be plug welded. I have my door aligned about as good as you can get with these trucks. If I push the front of the door in anymore it will not be flush with the cowl. I,ve tried two different rocker, one fitting in there better than the other, but both have the same issue. I didn't pay attention to how the original fit, but it had at least a half inch of bondo in it so it probably didnt matter. I know the truck was wrecked in the right front, but retained its original panels (with a fair amount of bondo). The floor, inner rocker, pillar and firewall don't have any visual signs of damage. I've read a lot of threads, and I know I can expect there will be some slicing and tweaking to get them to fit just right. But I haven't read anybody having the issue I have. An 1/8" gap wouldn't concern me but a 3/8" gap doesn't seem right. Any input would be greatly appreciated.
Thanks, Sean

**rechinca** · 02-20-2019, 12:50 PM

Sounds like she may have tweaked the cab from the wreck. Have taken measurements to see if the cab is still square and have good body mounts? I read some posts that the body mounts need to be in really good condition before doing this as they disintegrate during the years. I know you have it cut apart already, but I would start checking for square (like you said as good as the manufacturing allowed. You may find some issues along the pillars that are causing the issue too.

cornerstone · 02-20-2019, 03:22 PM

Pictures would help me understand your problem better. I've only replaced 1 set of rockers but I'd be glad to try to assist.

70sangersean · 02-20-2019, 03:26 PM

Thanks guys. I will try to get some pics up tonight.

57taskforce · 02-20-2019, 09:12 PM

I had to slice mine up on both ends of both sides to get them to fit the way I wanted. Pics definitely will help us.

Southpaw69 · 02-20-2019, 11:38 PM

I'm interested in seeing pics too. I'm having a similar issue, it'll get figured out one way or another.

70sangersean · 02-22-2019, 09:35 PM

Trying to figure out how to upload pics. The site says I'm missing a security token ?

70sangersean · 02-22-2019, 11:38 PM

What's this security token ? Gotta have so many post before you can post pics ?

Southpaw69 · 02-22-2019, 11:55 PM

Try sizing the pictures down. I think that means they're too big. I could be wrong, worth a try though.

718jwh · 02-23-2019, 11:42 AM

Don’t know if this will help your situation, but I had a lot of trouble getting aftermarket rockers to fit right so I bought NOS rockers and it make a huge difference. The cost is way more but made installation super easy.

70sangersean · 02-24-2019, 01:08 AM

http://67-72chevytrucks.com/vboard/a...1&d=1550984250
The factory didn't do the greatest panel line up. As seen in the last pic.

70sangersean · 02-24-2019, 08:21 PM

Got some pics up. Any thoughts ?
Thanks

70sangersean · 02-26-2019, 01:18 PM

One last effort. Anybody ?

02-20-2019, 12:42 PM	#1
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Outer rocker panel replacement issue So I'm replacing my outer pass. side rocker and the issue I am having is when I line up the rocker edge with the door edge in the front, so its flush, I end up with a big gap between side of the front pillar and the rocker where it needs to be plug welded. I have my door aligned about as good as you can get with these trucks. If I push the front of the door in anymore it will not be flush with the cowl. I,ve tried two different rocker, one fitting in there better than the other, but both have the same issue. I didn't pay attention to how the original fit, but it had at least a half inch of bondo in it so it probably didnt matter. I know the truck was wrecked in the right front, but retained its original panels (with a fair amount of bondo). The floor, inner rocker, pillar and firewall don't have any visual signs of damage. I've read a lot of threads, and I know I can expect there will be some slicing and tweaking to get them to fit just right. But I haven't read anybody having the issue I have. An 1/8" gap wouldn't concern me but a 3/8" gap doesn't seem right. Any input would be greatly appreciated. Thanks, Sean

02-20-2019, 12:50 PM	#2
rechinca Senior Member Join Date: Jul 2018 Location: Vacaville, CA Posts: 535	Re: Outer rocker panel replacement issue Sounds like she may have tweaked the cab from the wreck. Have taken measurements to see if the cab is still square and have good body mounts? I read some posts that the body mounts need to be in really good condition before doing this as they disintegrate during the years. I know you have it cut apart already, but I would start checking for square (like you said as good as the manufacturing allowed. You may find some issues along the pillars that are causing the issue too. __________________ 1971 Custom/10 - 350/3 speed, Orange/White roof

02-20-2019, 03:22 PM	#3
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: Outer rocker panel replacement issue Pictures would help me understand your problem better. I've only replaced 1 set of rockers but I'd be glad to try to assist. __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

02-20-2019, 03:26 PM	#4
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue Thanks guys. I will try to get some pics up tonight.

02-20-2019, 09:12 PM	#5
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,506	Re: Outer rocker panel replacement issue I had to slice mine up on both ends of both sides to get them to fit the way I wanted. Pics definitely will help us. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

02-20-2019, 11:38 PM	#6
Southpaw69 Registered User Join Date: Jan 2018 Location: Modesto, CA Posts: 92	Re: Outer rocker panel replacement issue I'm interested in seeing pics too. I'm having a similar issue, it'll get figured out one way or another.

02-22-2019, 09:35 PM	#7
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue Trying to figure out how to upload pics. The site says I'm missing a security token ?

02-22-2019, 11:38 PM	#8
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue What's this security token ? Gotta have so many post before you can post pics ?

02-22-2019, 11:55 PM	#9
Southpaw69 Registered User Join Date: Jan 2018 Location: Modesto, CA Posts: 92	Re: Outer rocker panel replacement issue Try sizing the pictures down. I think that means they're too big. I could be wrong, worth a try though.

02-23-2019, 11:42 AM	#10
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: Outer rocker panel replacement issue Don’t know if this will help your situation, but I had a lot of trouble getting aftermarket rockers to fit right so I bought NOS rockers and it make a huge difference. The cost is way more but made installation super easy.

02-24-2019, 01:08 AM	#11
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue http://67-72chevytrucks.com/vboard/a...1&d=1550984250 The factory didn't do the greatest panel line up. As seen in the last pic. Attached Images Last edited by 70sangersean; 02-24-2019 at 02:11 PM.

02-24-2019, 08:21 PM	#12
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue Got some pics up. Any thoughts ? Thanks

02-26-2019, 01:18 PM	#13
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Outer rocker panel replacement issue One last effort. Anybody ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.