PA 1972 suburban rear clip and 5 lug roller frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ShortbedClayton** · 02-24-2019, 08:23 PM

1972 gmc suburban rear clip section. Barn doors. 5 lug complete roller frame. 12 bolt open diff. Cut this section off as I’m building a crew cab. Barn doors are completely rust free. No rust in the roof section above doors. And bottom sill is near perfect as well. Barn doors work as the should. Quarters are rusty around wheel wells and inner wheel tubs are rusty as the spare tire well. Comes with rear glass. Was a small block auto set up. Some misc inner Pannel mounting brackets and 3 roof bows come with it. Two are cracked in the plastics... only thing missing on frame is the mid cab mounts... removed them for my build. Local pickup only. Not interested in seperateing anything at this time but if no interest I will seperate at a later date. 1500 for everything. Can get more pics upon request..
Posted via Mobile Device

cucvzuz · 02-25-2019, 11:44 PM

Im interested in some sheetmetal cut and the trim if you cut it up.

**ShortbedClayton** · 02-26-2019, 09:18 AM

Quote:

Originally Posted by cucvzuz

Im interested in some sheetmetal cut and the trim if you cut it up.

I’ll keep ya in mind. What exactly are you interested in?
Posted via Mobile Device

cucvzuz · 02-26-2019, 09:52 AM

Im looking for the driver tail light area, wheel arch and lower rear quarter. Also are you selling the front fenders?

**ShortbedClayton** · 02-26-2019, 10:04 AM

Quote:

Originally Posted by cucvzuz

Im looking for the driver tail light area, wheel arch and lower rear quarter. Also are you selling the front fenders?

Drives side fender was hit and idk what the Rh side was like.. but like to sell whole thing so I’ll keep ya in mind
Posted via Mobile Device

bmfm64 · 02-26-2019, 10:48 AM

Is that an original ribbed gas cap? If so would you sell it separate?

**ShortbedClayton** · 02-26-2019, 06:08 PM

Quote:

Originally Posted by bmfm64

Is that an original ribbed gas cap? If so would you sell it separate?

Idk if it’s OEM or not.. looks like it. I’ll let you decide...
Posted via Mobile Device

bmfm64 · 02-26-2019, 06:29 PM

Quote:

Originally Posted by ShortbedClayton

Idk if it’s OEM or not.. looks like it. I’ll let you decide...
Posted via Mobile Device

Looks like the one I'm looking for. What do you need for it shipped to 98042?

cucvzuz · 02-26-2019, 10:49 AM

I'm looking for the right fender.

**ShortbedClayton** · 02-26-2019, 10:51 AM

Quote:

Originally Posted by cucvzuz

I'm looking for the right fender.

I’ll look tonight. Where u located don’t really wanna ship something tht big
Posted via Mobile Device

cucvzuz · 02-26-2019, 11:31 AM

Quote:

Originally Posted by ShortbedClayton

I’ll look tonight. Where u located don’t really wanna ship something tht big
Posted via Mobile Device

michigan.

**ShortbedClayton** · 02-26-2019, 06:16 PM

Quote:

Originally Posted by cucvzuz

I'm looking for the right fender.

Good driver quality OEM 1972 GMC fender. Green is original paint. No rot thru just surface.... badge and eyebrow trim would be taken off... shipping may be a killer thinking that would be at least $75.. I’m thinking $150 plus the ride on it. Let me know what your thinking
Posted via Mobile Device

**ShortbedClayton** · 02-26-2019, 10:50 AM

I’ll have to look but if it’s straight I’m gonna keep left it on there as I think the tank is good
Posted via Mobile Device

**ShortbedClayton** · 02-26-2019, 11:52 AM

Ok well let me look Wht I have and let ya know
Posted via Mobile Device

cucvzuz · 02-26-2019, 10:29 PM

Ill pass on the fender. I didnt realize it was a GMC.

cucvzuz · 03-06-2019, 08:49 AM

Do you have the chrome channel that holds the drivers rear trim panel in . The one that goes under the rear side window.

**ShortbedClayton** · 03-06-2019, 10:02 AM

Quote:

Originally Posted by cucvzuz

Do you have the chrome channel that holds the drivers rear trim panel in . The one that goes under the rear side window.

No sorry
Posted via Mobile Device

02-24-2019, 08:23 PM	#1
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	1972 suburban rear clip and 5 lug roller frame 1972 gmc suburban rear clip section. Barn doors. 5 lug complete roller frame. 12 bolt open diff. Cut this section off as I’m building a crew cab. Barn doors are completely rust free. No rust in the roof section above doors. And bottom sill is near perfect as well. Barn doors work as the should. Quarters are rusty around wheel wells and inner wheel tubs are rusty as the spare tire well. Comes with rear glass. Was a small block auto set up. Some misc inner Pannel mounting brackets and 3 roof bows come with it. Two are cracked in the plastics... only thing missing on frame is the mid cab mounts... removed them for my build. Local pickup only. Not interested in seperateing anything at this time but if no interest I will seperate at a later date. 1500 for everything. Can get more pics upon request.. Posted via Mobile Device Attached Images

02-25-2019, 11:44 PM	#2
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 suburban rear clip and 5 lug roller frame Im interested in some sheetmetal cut and the trim if you cut it up.

02-26-2019, 09:52 AM	#4
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 suburban rear clip and 5 lug roller frame Im looking for the driver tail light area, wheel arch and lower rear quarter. Also are you selling the front fenders?

02-26-2019, 10:48 AM	#6
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: 1972 suburban rear clip and 5 lug roller frame Is that an original ribbed gas cap? If so would you sell it separate?

02-26-2019, 10:49 AM	#9
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 suburban rear clip and 5 lug roller frame I'm looking for the right fender.

02-26-2019, 10:50 AM	#13
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: 1972 suburban rear clip and 5 lug roller frame I’ll have to look but if it’s straight I’m gonna keep left it on there as I think the tank is good Posted via Mobile Device

02-26-2019, 11:52 AM	#14
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: 1972 suburban rear clip and 5 lug roller frame Ok well let me look Wht I have and let ya know Posted via Mobile Device

02-26-2019, 10:29 PM	#15
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 suburban rear clip and 5 lug roller frame Ill pass on the fender. I didnt realize it was a GMC.

03-06-2019, 08:49 AM	#16
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 suburban rear clip and 5 lug roller frame Do you have the chrome channel that holds the drivers rear trim panel in . The one that goes under the rear side window.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.