Cost to install wiring harness

[OARNGESI]

Hi how much did you guys pay to wire your truck?

[CO71Blazer]

I paid for the Painless kit from Summit Racing and installed it myself. It's really not a hard job and the Painless kit has very detailed instructions. I kept the old harness in tact for a reference until I had the new on in and working. It took me a weekend.

[HO455]

We need more information. There is a big difference in the cost of a plug and play AAW or M&H factory harness going in a stock truck and installing a custom harness in a LS motored /4L80 truck with aftermarket A/C, full on stereo, air bag controls, remote controlled start and door access, power windows, cruse control. I usually charge between $40-$50 an hour to do these kinds of jobs.

[OARNGESI]

It has a ls1 and 4160 Dakota digital gauges and stereo but nothing exotic after that it is basically stock the motor is wired starts shifts and runs already though any idea on a ball park on what I can expect?

[68 P.O.S.]

Depends on the harness, but figure around $600. Then there's the added cost of wire looms or any other items you may want to replace at the same time. I didn't do a whole lot else when I replaced mine so I paid somewhere around $700.

[SC1969c10]

I bought my harness off.... brothers? Everything was labeled and colored the same as stock. Took several weekends with my mechanic buddies help.

[franken]

It all depends on the harness you buy. wiringharness.com has many various harnesses that are stockish with mods for HEI and a newer style alternator that bolt in. Painless and AAW offer harnesses you need to terminate.
More spent on a harness means less labor cost.

[mjoc1]

Havent gotten around to doing my truck yet but using the AAW 15 circuit set up on my camaro with aftermarket everything AC stereo electric fans, updated interior lights, updated under hood. but a SBC It cost me $1000. in labor, my 67 BUick is pretty much stock with a few mods and aftermarket AC total cost will be $1400 done by a shop.
Michael

[57larry]

I used AAW, did it myself, not hard, just take your time

[mjoc1]

Originally Posted by 57larry

I used AAW, did it myself, not hard, just take your time

I should of done the camaro myself.. I know I could have. but I was afraid at the time to tackle it.. practiced making the proper crimps and bought the tools. (can never have enough tools) and am pretty sure when I get around to the truck it will be cake if I take my time and lay everything out carefully. as for the Buick I would have dont that too but Its at paint and body jail and then are doing it while everything is getting put back together.

But the AAW instructions are very easy to understand and the wiring is labelled every few inches now..

[OARNGESI]

Man I wish I could find some of your guys shops the best I found was 1500-2000 others were talking 5-8k all of that is just labor

[TruDom]

Originally Posted by OARNGESI

Man I wish I could find some of your guys shops the best I found was 1500-2000 others were talking 5-8k all of that is just labor

uh just about everyone in here listed what they paid for the harness and did the labor themselves.

[James K]

Originally Posted by OARNGESI

Man I wish I could find some of your guys shops the best I found was 1500-2000 others were talking 5-8k all of that is just labor

AAW kit was 575.00, crimping tool 75.00

30+ hours of my time. I wanted in routed to hide as much as possible.

Do you just not want to do it yourself?

[jeffahart]

I think a qualified shop should be able to do it in about 10 hours. Nothing to the harness.


j

[SC1969c10]

Originally Posted by jeffahart

I think a qualified shop should be able to do it in about 10 hours. Nothing to the harness.


j

It takes way more than 10 hours in a fully assembled truck. Wayyy more

[weq92f]

Originally Posted by SC1969c10

It takes way more than 10 hours in a fully assembled truck. Wayyy more

Qualified shop also means they might just have one guy working the engine, one guy working the cab and another working the rear. If they did it in 10 hours, that'd be 30 man hours, right? Is that Wayyy more?

-klb