WA Tilt Column, Column Shift Auto - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 03-17-2019, 02:05 AM

This is a van tilt that I disassembled, cleaned, lubed and set to factory specs.
Neutral safety/backup switch has been moved to the proper position with truck grommets and retainer installed. I also installed the proper connector on the indicator lamp wire and a new indicator bulb.
$350 shipped.

I have a nice used intermediate shaft that I collapsed to the proper length available for an additional $40 if needed, otherwise collapse yours 2.5” and it’s a bolt in.

*randy500* · 03-17-2019, 02:08 AM

Pictured with the $300 worth of tools it takes to disassemble one of these columns....

jondancer · 03-17-2019, 07:49 AM

This is bolt in ready for pickup ?

*randy500* · 03-17-2019, 09:52 AM

Quote:

Originally Posted by jondancer

This is bolt in ready for pickup ?

Yes with collapsing your intermediate shaft or purchasing mine it will bolt right in.

*randy500* · 03-20-2019, 11:39 AM

Ttt

**MeanGreen72C10** · 03-20-2019, 09:02 PM

I thought someone claimed this already? do you think this will work with the No Limit rack and pinion?

*randy500* · 03-20-2019, 09:20 PM

Quote:

Originally Posted by MeanGreen72C10

I thought someone claimed this already? do you think this will work with the No Limit rack and pinion?

I’m sure it would. Is that a kit with u joints and stuff to get from the rack to the column? Usually those kits have double d shafts you cut to length for fitment.

*randy500* · 03-28-2019, 01:06 PM

Ttt

fatrat · 03-28-2019, 03:14 PM

will this work on a 1966 c-20>

*randy500* · 03-28-2019, 03:16 PM

Quote:

Originally Posted by fatrat

will this work on a 1966 c-20>

I’ve seen people do it over on that year forum. I don’t know the details though.

fatrat · 03-28-2019, 03:17 PM

can you tell me what year van?

*randy500* · 03-28-2019, 03:27 PM

Quote:

Originally Posted by fatrat

can you tell me what year van?

Mid 70’s they are all the same until the key went on the column around 86 or so.

Navaj · 04-12-2019, 09:05 PM

Do you still have 70 c10 steering column?

*randy500* · 04-12-2019, 09:08 PM

Quote:

Originally Posted by Navaj

Do you still have 70 c10 steering column?

I have some automatic columns, no tilts. I’m moving them up to the top of the page now, you looking for a non tilt?

Terrysch · 04-18-2019, 06:15 PM

Randy,

I got the steering column yesterday.
Finally had a chance today to look at it.

Looks great!
Thanks!!!!!!

Terry

*randy500* · 04-18-2019, 06:34 PM

Quote:

Originally Posted by Terrysch

Randy,

I got the steering column yesterday.
Finally had a chance today to look at it.

Looks great!
Thanks!!!!!!

Terry

Good to hear and your welcome.

Navaj · 04-18-2019, 07:32 PM

I was wanting a tilt. Do you think you will get another?

*randy500* · 04-18-2019, 07:44 PM

Quote:

Originally Posted by Navaj

I was wanting a tilt. Do you think you will get another?

I get them all the time, i will pm you next one i get.

Navaj · 04-18-2019, 07:57 PM

Awesome thanks.

72GMC51 · 05-24-2019, 11:06 AM

Looking for a tilt column for my 1972 GMC 1/2, are these original equipment rebuilds?
I tried to save some money and installed a cheaper repot and it’s basically falling apart.
I am interested in a OEM rebuilt if you have one. PM me with price and availability.
Thank You
John Carroll

03-17-2019, 02:05 AM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Tilt Column, Column Shift Auto This is a van tilt that I disassembled, cleaned, lubed and set to factory specs. Neutral safety/backup switch has been moved to the proper position with truck grommets and retainer installed. I also installed the proper connector on the indicator lamp wire and a new indicator bulb. $350 shipped. I have a nice used intermediate shaft that I collapsed to the proper length available for an additional $40 if needed, otherwise collapse yours 2.5” and it’s a bolt in. Attached Images

03-17-2019, 02:08 AM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, Column Shift Auto Pictured with the $300 worth of tools it takes to disassemble one of these columns.... Attached Images

03-17-2019, 07:49 AM	#3
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Tilt Column, Column Shift Auto This is bolt in ready for pickup ?

03-20-2019, 11:39 AM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, Column Shift Auto Ttt

03-20-2019, 09:02 PM	#6
MeanGreen72C10 Registered User Join Date: Feb 2019 Location: Harrison Township, MI Posts: 148	Re: Tilt Column, Column Shift Auto I thought someone claimed this already? do you think this will work with the No Limit rack and pinion?

03-28-2019, 01:06 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, Column Shift Auto Ttt

03-28-2019, 03:14 PM	#9
fatrat Registered User Join Date: Feb 2018 Location: valders wi Posts: 22	Re: Tilt Column, Column Shift Auto will this work on a 1966 c-20>

03-28-2019, 03:17 PM	#11
fatrat Registered User Join Date: Feb 2018 Location: valders wi Posts: 22	Re: Tilt Column, Column Shift Auto can you tell me what year van? Last edited by fatrat; 03-28-2019 at 03:18 PM. Reason: spelling

04-12-2019, 09:05 PM	#13
Navaj Registered User Join Date: Apr 2019 Location: Wellington Posts: 5	Re: Tilt Column, Column Shift Auto Do you still have 70 c10 steering column?

04-18-2019, 06:15 PM	#15
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 573	Re: Tilt Column, Column Shift Auto Randy, I got the steering column yesterday. Finally had a chance today to look at it. Looks great! Thanks!!!!!! Terry

04-18-2019, 07:32 PM	#17
Navaj Registered User Join Date: Apr 2019 Location: Wellington Posts: 5	Re: Tilt Column, Column Shift Auto I was wanting a tilt. Do you think you will get another?

04-18-2019, 07:57 PM	#19
Navaj Registered User Join Date: Apr 2019 Location: Wellington Posts: 5	Re: Tilt Column, Column Shift Auto Awesome thanks.

05-24-2019, 11:06 AM	#20
72GMC51 72GMC51 Join Date: Jul 2004 Location: Minnesota Posts: 233	Re: Tilt Column, Column Shift Auto Looking for a tilt column for my 1972 GMC 1/2, are these original equipment rebuilds? I tried to save some money and installed a cheaper repot and it’s basically falling apart. I am interested in a OEM rebuilt if you have one. PM me with price and availability. Thank You John Carroll __________________ 72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.