Burb Frame vs. Truck Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clemsonteg · 03-25-2019, 03:34 PM

Are burb frames wider in the rear? I am trying to install a No Limit shock relocation kit on my burb and the shocks are angled in toward the center of the truck like the top mount is too far out. The only explanation I have is that the frame is wider on the burb and the mounts are designed on a truck frame.

**Captainfab** · 03-25-2019, 11:58 PM

The '63-'66 C10 Suburban/Panel frames are the same width as the '63-'66 C10,20 pickup frames. The '60-'62 C10 Suburban/Panel frames are the same width as the '60-'62 C10,20 pickup frames. The '60-'62 frames are wider in the rear than the '63-'66 frames.

clemsonteg · 03-26-2019, 09:57 AM

Quote:

Originally Posted by Captainfab

The '63-'66 C10 Suburban/Panel frames are the same width as the '63-'66 C10,20 pickup frames. The '60-'62 C10 Suburban/Panel frames are the same width as the '60-'62 C10,20 pickup frames. The '60-'62 frames are wider in the rear than the '63-'66 frames.

Thanks, Captain. I guess there is some other reason for the shock mis-alignment.

**62bagger** · 03-26-2019, 10:38 PM

I used then on my 62 fleetside and I had to trim them to 1" wide and they lined up fine.

clemsonteg · 03-29-2019, 10:59 AM

Quote:

Originally Posted by 62bagger

I used then on my 62 fleetside and I had to trim them to 1" wide and they lined up fine.

Which part did you trim, the upper mount?

**62bagger** · 03-29-2019, 03:41 PM

I trimmed the upper mount to 1" wide and it lined up with the bottom shock mount.

03-25-2019, 03:34 PM	#1
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Burb Frame vs. Truck Frame Are burb frames wider in the rear? I am trying to install a No Limit shock relocation kit on my burb and the shocks are angled in toward the center of the truck like the top mount is too far out. The only explanation I have is that the frame is wider on the burb and the mounts are designed on a truck frame.

03-25-2019, 11:58 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Burb Frame vs. Truck Frame The '63-'66 C10 Suburban/Panel frames are the same width as the '63-'66 C10,20 pickup frames. The '60-'62 C10 Suburban/Panel frames are the same width as the '60-'62 C10,20 pickup frames. The '60-'62 frames are wider in the rear than the '63-'66 frames. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-26-2019, 10:38 PM	#4
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 285	Re: Burb Frame vs. Truck Frame I used then on my 62 fleetside and I had to trim them to 1" wide and they lined up fine.

03-29-2019, 03:41 PM	#6
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 285	Re: Burb Frame vs. Truck Frame I trimmed the upper mount to 1" wide and it lined up with the bottom shock mount. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.