Inner fender mounting grommets?

[bigmoe]

Can anyone confirm where these go? On the four upper inner fender to firewall?
I don’t remember anything there during disassemble. There is 4 in a set.

[bigmoe]

Classic Parts catalogue says "for mounting inner fender to cab and to rad support".

[forestb]

There should be two brackets that bolt onto the bottom corners of the fire wall which then bolt to the inner fenders. I think those attach to those brackets and then bolt to the inner fenders.

[bigmoe]

Originally Posted by forestb

There should be two brackets that bolt onto the bottom corners of the fire wall which then bolt to the inner fenders. I think those attach to those brackets and then bolt to the inner fenders.

I see they fit onto the bottom back corner of the inner fender to bolt to an L shaped bracket on the firewall. Figured they might go there but that’s two of them and they come in a set of four.

[damnyankee36]

Originally Posted by bigmoe

I see they fit onto the bottom back corner of the inner fender to bolt to an L shaped bracket on the firewall. Figured they might go there but that’s two of them and they come in a set of four.

Only two are needed as you figured. And, I only see two in the catalog pic you posted.

[forestb]

It has been a while sense I have replaced them but I am thinking that there are 2 brackets. One that bolts to the cab and one to the fender. They both receive a grommet. But I might be wrong.

[Chevy Fleetside]

There is only 2 needed and they do go where everyone is saying they go. Hopfully they didn't send you the earlier ones. Did that to me some years ago. There were 4 in the package but they were for a 55-59.