![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Some good stuff I don't need anymore
Cleaning out the garage so my parents will still let me store my parts until I graduate and get a house of my own
![]() All parts are plus shipping and PayPal fees unless noted otherwise. *It has come to my attention that in the future I need to only post pics that show the actual parts for sale. If it's not listed in this first post, it's not for sale.* Here's the stuff: #1 GMC horn button in great, original shape. Has normal wear and 1 small pitting mark, but other than that, a nice piece. $25 -SOLD- #2 Front drum brakes complete from spindles out. Pulled off my 63 when I went disc brakes. Needs wheel cylinders, but the bearings seem ok. Also have drums in good shape that go with it, but I forgot to take a pic of those. $40 #3 Mr. Gasket air cleaner 9 in 4 barrel air cleaner. I bought it when I put a Quadrajet on my 283, ran it for a couple of months, then pulled it off to use a factory looking air cleaner. $10 -SOLD- #4 SBC Long water pump. Came on the 283 I bought, but I needed a short water pump. This pump was working great when the previous owner of the engine pulled the 283 for a 350 $10 #5 Factory jack hold down with hardware and spring. $15 -SOLD- #6 Original battery tray. Driver quality, solid piece. Would run on my truck if I had not bought a tray a couple months before I bought the core support this came on. $20 -SOLD- #7 Windshield washer bottle bracket with bolts. Good condition, solid. $15 #8 Horn, I don't think it works $5 #9 Horn relay and voltage regulator. Don't know if it works, but it's $10 #10 60 Chevy grille. Good shape, includes the light bezels. Not rusted out. Only a couple small dings around a few of the letters. $125 -SOLD- #11 64-66 radio delete plate with nice clips. Straight, no dings that I can see, nice patina $40 -SOLD- #12 E brake handle. $10 -SOLD- #13 Mr. Gasket carb spacer. Ended up not working for what I was trying to do. I didn't even get to bolt it to anything. Also comes with that Quadrajet base gasket. $20 #14 Hood latch with bolts. Came off a 62-66 hood, no clue what year it actually is. $10 #15 Original red arm rest. It's pretty rough, but maybe your patina truck needs it? $10 #16 Two sets of wiper arms and blades. One set is Anco and were on my truck when I got it. The other set is some aftermarket, replacement arms from the usual big parts places. I have no use for either set because I upgraded to Jeep arms. $10 each pair, or $15 if you buy both Both -SOLD- #17 Chevy horn button. A couple pits, I accidentally scratched off some of the bowtie paint, driver quality, rubber ring is nice and pliable. $20 -SOLD-
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 06-24-2020 at 05:25 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
#2 Spindles are just dusty. They have been kept inside my parent's garage since I pulled them off the truck.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
#3
#4
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
#5 Factory jack hold down with hardware and spring. $15 -SOLD-
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 02-02-2020 at 12:34 AM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2010
Location: Southern CA
Posts: 1,629
|
Re: Some good stuff I don't need anymore
I'll take the horn button to 92585
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
I'll get it boxed up and get you a shipping quote on Tuesday.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2010
Location: Southern CA
Posts: 1,629
|
Re: Some good stuff I don't need anymore
Ok thanks, a padded envelope would work too.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
1960chevypanel: I sent you a PM about shipping.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
GMC horn button SOLD to 1960chevypanel! Thanks Patrick, I'll get it shipped out tomorrow
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#10 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Still got this stuff. Will be at the Commerce swap meet on the 3rd
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#11 |
Account Suspended
Join Date: Feb 2018
Location: Powell, WY
Posts: 2,048
|
Re: Some good stuff I don't need anymore
I'll take the jack holder and spring if you don't mind shipping it. Thanks, Harlow
|
![]() |
![]() |
![]() |
#12 | |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Quote:
![]()
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
![]() |
![]() |
![]() |
#13 |
Account Suspended
Join Date: Feb 2018
Location: Powell, WY
Posts: 2,048
|
Re: Some good stuff I don't need anymore
Sounds good. Thanks, Harlow
|
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Harlow, I sent you a pm. Sorry for the delay
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Jack mount SOLD to Harlow
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Air cleaner sold at the swap meet on Saturday.
Still have the water pump and the brake kit
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Still have the brakes and the water pump. Also have a few parts from a core support panel that I'll be posting up next week when I go home for Thanksgiving
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
#8
#9
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 03-18-2020 at 01:05 PM. |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
#10
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2011
Location: Chaparral NM
Posts: 693
|
Re: Some good stuff I don't need anymore
__________________
CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose) |
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
The 62 grille sold the day I took the pics of the 60 grille. I sold it locally through Facebook Marketplace
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
![]() |
![]() |
![]() |
#22 |
One foot in front of the other
![]() Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,459
|
Re: Some good stuff I don't need anymore
Is that an extra set of bezels for the 60 grill or do they go with the grill? I would be interested in those if extra, plus the sail panel and hood inserts depending on price.
|
![]() |
![]() |
![]() |
#23 | |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Quote:
The sail panel is in rough shape. Pretty much every screw hole is busted out. It will probably end up on my wall as wall art. I do know of a set in a local junkyard that's in good shape if you need a set. On the hood inserts, I'm going to be holding on to them. I like them more than the 60 inserts and when I eventually find a 60-61 hood, I'll be using these on it. My apologies for the confusion
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
![]() |
![]() |
![]() |
#24 |
One foot in front of the other
![]() Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,459
|
Re: Some good stuff I don't need anymore
I do know of a set in a local junkyard that's in good shape if you need a set.
I'd be interested. |
![]() |
![]() |
![]() |
#25 | |
Senior Member
![]() ![]() ![]() Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,506
|
Re: Some good stuff I don't need anymore
Quote:
![]()
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|