CO SBC serpentine setup $125+shipping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 06-11-2019, 08:30 PM

Selling a serpentine setup from a TBI era truck

Alternator charges fine, i ran it on my 93 for 2 weeks

PS pump fluid looks good

AC compressor is a core only

No water pump, but they’re cheap

I have the clutch fan also, not in the pic.

Also have the fasteners

$125 local

I can ship. Maybe cheaper without the compressor, it’s good as a core only.

**MeanGreen72C10** · 06-11-2019, 10:27 PM

can it be run w/o the ac pump?

**clay68c10** · 06-11-2019, 10:52 PM

Yes, there is an idler pulley available for running it without the compressor. The GM part number is 10118713

Lokin4AReason · 06-11-2019, 11:04 PM

What year is the setup ?

**clay68c10** · 06-12-2019, 06:24 AM

It came off an 89, but it is an exact match to what’s on my 93

**clay68c10** · 06-14-2019, 06:40 AM

Bump
By the way, this is the same setup GMPP sells and uses on their crate motors

**clay68c10** · 06-21-2019, 06:48 AM

Bump

**invicta455** · 06-23-2019, 08:24 PM

Could I get a price shipped to zip 27406

**clay68c10** · 06-24-2019, 06:25 AM

I will check on that today

**clay68c10** · 06-24-2019, 08:14 PM

Shipping with the compressor core is $45 (70lbs)
Without it is $39 (54lbs)

This is without the fan. It would need a separate box and would add another $20

This stuff is heavy.

**clay68c10** · 06-24-2019, 08:19 PM

If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped.

Black71Shorty · 06-25-2019, 11:06 PM

Quote:

Originally Posted by clay68c10

If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped.

I’ll take it like that. Send me your payment info.

Thanks
Coby

**clay68c10** · 06-26-2019, 07:00 AM

Ok. PM sent

Black71Shorty · 06-26-2019, 08:53 AM

Payment sent

Thanks

**clay68c10** · 06-26-2019, 09:09 AM

Sold!

06-11-2019, 08:30 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	SBC serpentine setup $125+shipping Selling a serpentine setup from a TBI era truck Alternator charges fine, i ran it on my 93 for 2 weeks PS pump fluid looks good AC compressor is a core only No water pump, but they’re cheap I have the clutch fan also, not in the pic. Also have the fasteners $125 local I can ship. Maybe cheaper without the compressor, it’s good as a core only. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 06-21-2019 at 06:48 AM.

06-11-2019, 10:27 PM	#2
MeanGreen72C10 Registered User Join Date: Feb 2019 Location: Harrison Township, MI Posts: 148	Re: SBC serpentine setup $125+shipping can it be run w/o the ac pump?

06-11-2019, 10:52 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Yes, there is an idler pulley available for running it without the compressor. The GM part number is 10118713 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-11-2019, 11:04 PM	#4
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 972	Re: SBC serpentine setup $125+shipping What year is the setup ? __________________ dont want to hear excuses, i want to hear solution(s)

06-12-2019, 06:24 AM	#5
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping It came off an 89, but it is an exact match to what’s on my 93 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-14-2019, 06:40 AM	#6
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Bump By the way, this is the same setup GMPP sells and uses on their crate motors __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-21-2019, 06:48 AM	#7
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Bump __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-23-2019, 08:24 PM	#8
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 536	Re: SBC serpentine setup $125+shipping Could I get a price shipped to zip 27406

06-24-2019, 06:25 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping I will check on that today __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-24-2019, 08:14 PM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Shipping with the compressor core is $45 (70lbs) Without it is $39 (54lbs) This is without the fan. It would need a separate box and would add another $20 This stuff is heavy. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-24-2019, 08:19 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-26-2019, 07:00 AM	#13
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Ok. PM sent __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-26-2019, 08:53 AM	#14
Black71Shorty Registered User Join Date: May 2009 Location: Ft. Worth, Texas...”Where the West begins” Posts: 424	Re: SBC serpentine setup $125+shipping Payment sent Thanks

06-26-2019, 09:09 AM	#15
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: SBC serpentine setup $125+shipping Sold! __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.