|
|
|
06-17-2019, 11:21 AM
|
#1 |
|
Senior Member
 
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Dads 1966 C-10
So after I did an LS swap on my 66 SWB custom cab my dad decided to put his 1966 back together his truck is a standard cab long bed fleet side. Originally it was a 327V8 with a three on the tree. Since then It was switched to a 4 on the floor and the old 327 replaced with a used 350. It was his daily driver back when I was a little tike. He decided to tear it apart maybe 10 years ago and the plan was to give it a freshening up and give it to my little brother. My little brother moved out of the state so it just sat in the corner of the shop collecting dust. I’ll start adding pictures of the truck and the progress. It has come a long way since last summer. Pictures to follow
__________________
My current 66  C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
06-17-2019, 11:37 AM
|
#2 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
So I started receiving pictures from my little dad and I was super stoked that he was working on the yellow truck. Up until this point the cab was sitting in the corner of the shop. It needed floor patches cab corners and the rocker panels replaced. Here’s my dad 65 years young
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-17-2019, 12:12 PM
|
#3 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Passenger side floor and rocker panel work. The floor support was salvageable also the cab corner was replaced. Follow along for the build
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-17-2019, 12:17 PM
|
#4 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Everything is looking way better welds smoothed out and cab corner in primer.
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-17-2019, 01:40 PM
|
#5 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Wiper motor mount was rusted out pretty bad. Salvaged one from a doner truck. Cut removed and replaced
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-17-2019, 01:54 PM
|
#6 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
September 3rd 2018:
Used an NOS GM rocker panel on this side. Floor is looking good. The underside was cleaned and coated with undercoating
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-18-2019, 10:00 AM
|
#7 |
|
Registered User
Join Date: Jul 2014
Location: Ft Whoopup, Ab
Posts: 317
|
Re: Dads 1966 C-10
Great build, following along...
|
|
|
|
|
06-18-2019, 12:19 PM
|
#8 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Wiring harness for the PCM is longer than I like and so it makes it difficult to hide the wires under the dash. I will be shortening each wire one by one. I started on it last Friday but I had to head home because of work. Hopefully I can make it back out there a couple more times this summer and finish up the computer wiring.
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-18-2019, 10:52 PM
|
#9 |
|
Registered User
Join Date: Sep 2017
Location: Cedar Park, Tx
Posts: 209
|
Re: Dads 1966 C-10
Wow! That's a lot of progress. Looks great!
__________________
Wampus Cat Build: http://67-72chevytrucks.com/vboard/s...d.php?t=759550 |
|
|
|
|
06-19-2019, 12:18 AM
|
#10 |
|
Registered User
Join Date: Oct 2014
Location: somewhere . . .
Posts: 972
|
Re: Dads 1966 C-10
Looking good. Keep the progress coming . . . .
__________________
dont want to hear excuses, i want to hear solution(s) |
|
|
|
|
06-22-2019, 04:26 PM
|
#11 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Tailgate was just painted factory dark yellow with ivory letters. Those letters are not decals they were painted first then they were taped off. Once the body color was sprayed the whole tailgate was cleared
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-22-2019, 08:27 PM
|
#12 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Header panel is done and in clear, fender emblem detailed and installed so the fenders are ready to mount.
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-22-2019, 11:27 PM
|
#13 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Dads 1966 C-10
Good job on the masking and painting.....Looking really nice
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
06-26-2019, 09:08 PM
|
#14 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Header panel and grille together. My dad picked up this set of Cragar S/S wheels and nearly brand new set of Michelin tires for 500. What a score
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-27-2019, 05:50 AM
|
#15 |
|
Senior Member
Join Date: Aug 2017
Location: Louisville, KY
Posts: 380
|
Re: Dads 1966 C-10
Looks extremely clean.
|
|
|
|
|
07-01-2019, 12:01 AM
|
#16 |
|
Senior Member
Join Date: Apr 2009
Location: SAN FERNANDO VALLE SOL CAL
Posts: 1,064
|
Re: Dads 1966 C-10
Really Great Looking Truck
__________________
1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years |
|
|
|
|
07-04-2019, 12:55 AM
|
#17 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Went to dads on Sunday and continued where I left off. LS harness is now completed and it’s now standalone. I converted the main cab harness to accept the gauge cluster since the truck originally had warning lights and the harness is now installed. My dad picked up a fuel pump because the late 80’s pump I. The donor fuel tanks was for throttle body injection. I turned the key and the 5.3 busted right off. Wheels installed
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
07-22-2019, 03:08 PM
|
#18 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Inner fenders and core support on, and the radiator is in place so the shroud can sorted out
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
07-22-2019, 03:12 PM
|
#19 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Hole cut in the shroud for the electric fan. I wired the two speed fan to the pcm so the fan will switch on and off as needed. Transmission cooler has been mounted
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
10-06-2019, 09:12 AM
|
#20 |
|
Registered User
Join Date: Sep 2008
Location: Newport, North Carolina
Posts: 643
|
Re: Dads 1966 C-10
Nice job guys...truck is looking good!
|
|
|
|
|
10-09-2019, 09:50 AM
|
#21 |
|
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,654
|
Re: Dads 1966 C-10
Damn fine job!! I like the build, great color combo too.
|
|
|
|
|
10-09-2019, 01:06 PM
|
#22 |
|
Registered User
Join Date: Jul 2019
Location: Cambridge, Ontario
Posts: 34
|
Re: Dads 1966 C-10
Wow, awesome job....it's looking great
__________________
 Check out my 66 C10 build here: http://67-72chevytrucks.com/vboard/s...d.php?t=546694 Look here, I also built a canoe: http://stevescedarstripcanoe.blogspot.com/ |
|
|
|
|
10-11-2019, 03:49 PM
|
#23 |
|
Senior Member
  
Join Date: Oct 2011
Location: Wolfforth, Texas
Posts: 976
|
Re: Dads 1966 C-10
Looking Great!
__________________
Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it"  Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763 |
|
|
|
|
06-16-2020, 10:35 PM
|
#24 |
|
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
Re: Dads 1966 C-10
Went up and helped my dad fix the gas gauge so we could put the bed on. He had already relocated the gas tank under the bed of the truck so the gauge needed to be fixed first. So other than a radio the truck is ready. My dad decided he wants to go with steel wheels painted yellow with factory white hubcaps. It will look bone stock And will be such a sleeper
__________________
My current 66 C-10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=641267My dads 66 C-10 build Old Yellow http://67-72chevytrucks.com/vboard/s...42#post8543842 My You Tube channel: https://www.youtube.com/channel/UCm0...VItKbZ3jM5YEQw |
|
|
|
|
06-17-2020, 09:18 AM
|
#25 |
|
Registered User
Join Date: Jul 2019
Location: Idaho Falls, Id.
Posts: 173
|
Re: Dads 1966 C-10
The truck looks fantastic! Your Dad did a first rate job on her!
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
