Coil Overs for our trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 11-30-2003, 07:26 AM

Have any of you used this kit, and if so, what do you think of it? I have been wanting to buy it for some time now, and I think I am for Christmas this year.
I like to hear from anyone who has used it though, before I do.

http://www.classicperform.com/tech_a...coil-overs.htm

jmanz69 · 11-30-2003, 11:37 AM

I've thought of using it too. I think it lowers your rear end about 4-5 inches and will really affect your loading ability. If you don't plan to use your truck for towing or hauling, you should be fine. I won't do any of that when mine is done, so I am still considering it. I would also like to hear what others think about it. Or if anyone has used it.

**PICKMUP** · 11-30-2003, 05:50 PM

Those shocks look so good, you would need a glass bottom bed floor, so everyone could see them.
Before you buy, check with CPP on dropped distance. I think you only get about 1"...must use blocks to get more than that...but not positive, so ask first...and let us know what you find out.

68LSS1 · 11-30-2003, 06:34 PM

My original plan was to use this kit with the c-notches. They make a 3" and 4 1/2" kit. Since they are true coil overs you will be able to adjust your ride height. I talked to them a few times and they were very helpful on the phone. I think it would be a very good kit.

11-30-2003, 07:26 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Coil Overs for our trucks Have any of you used this kit, and if so, what do you think of it? I have been wanting to buy it for some time now, and I think I am for Christmas this year. I like to hear from anyone who has used it though, before I do. http://www.classicperform.com/tech_a...coil-overs.htm __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-30-2003, 05:50 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Those shocks look so good, you would need a glass bottom bed floor, so everyone could see them. Before you buy, check with CPP on dropped distance. I think you only get about 1"...must use blocks to get more than that...but not positive, so ask first...and let us know what you find out. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

11-30-2003, 06:34 PM	#4
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	My original plan was to use this kit with the c-notches. They make a 3" and 4 1/2" kit. Since they are true coil overs you will be able to adjust your ride height. I talked to them a few times and they were very helpful on the phone. I think it would be a very good kit. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

11-30-2003, 11:37 AM	#2
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I've thought of using it too. I think it lowers your rear end about 4-5 inches and will really affect your loading ability. If you don't plan to use your truck for towing or hauling, you should be fine. I won't do any of that when mine is done, so I am still considering it. I would also like to hear what others think about it. Or if anyone has used it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.