|
|
|
06-23-2019, 05:02 PM
|
#1 |
|
Registered User
Join Date: Sep 2017
Location: Greeley Colorado
Posts: 27
|
Trim clips
Another question, new to the rebuild process. I've got factory trim piece clips that are metal. How do I remove them? Could I grind them off to replace them? Any suggestions or advice would help!! Thank you
|
|
|
|
06-23-2019, 09:42 PM
|
#2 | |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,771
|
Re: Trim clips
Quote:
There either should be a nut on the back of the clip or you squeeze the clip together on the back side of the panel, then push it out. Spray a little penetrating oil on them. They come out easier then. I would try and save them. The reproduction clips that I bought with the repro trim I put on the '71 k10 when I rebuilt it did not work well. I ended up scrounging up enough originals to put it on. That's been a few years ago so maybe they have corrected the problem. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
06-23-2019, 11:29 PM
|
#3 |
|
Registered User
Join Date: Feb 2019
Location: Nor Cal
Posts: 822
|
Re: Trim clips
Post a picture of the Molding and the clip if you can, we can help you on how to remove it.
__________________
1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
