![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2016
Location: Albemarle
Posts: 21
|
S10 Transmission Question
So I have a 1965 longbed with a 327 in it. It already has a 3 on the floor but the shifter is to close the seat. I'm wanting to put a s10 transmission in it. What all do I need to put one in my truck besides the transmission its self. Thanks for any info.
|
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: S10 Transmission Question
Lots and lots of info using the search .
![]() here is one from the faq section http://67-72chevytrucks.com/vboard/s....php?p=4871869 and one from LUGNUTZ https://lugnutz65chevystepside.weebl...rear-axle.html
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2016
Location: san bernardino ca
Posts: 1,611
|
Re: S10 Transmission Question
Why a s10 trans????????
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2016
Location: Albemarle
Posts: 21
|
Re: S10 Transmission Question
|
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: S10 Transmission Question
your welcome for the links
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
![]() |
![]() |
![]() |
#6 | |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,994
|
Re: S10 Transmission Question
The real reason it's a good idea is because it's a 5-speed trans with overdrive - and the S10 variant of the T5 has the stick in the right place to clear a bench seat. Low highway rpm is the benefit. It's light duty, but is fine behind a small V8 as long as not abused. There a few "world class" S10 transmission out there, but not many - WC is slightly beefier. The best combo is a Camaro main case with an S10 tailshaft - avoids the spacing required with an S10 input shaft yet has stick correctly located.
Quote:
Those ARE some good links by the way... ![]() |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2016
Location: Albemarle
Posts: 21
|
Re: S10 Transmission Question
|
![]() |
![]() |
![]() |
Bookmarks |
|
|