WA Superlift 6” front lift springs, k10 or k20, rear blocks and u bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 07-30-2019, 07:56 PM

These seem to be about $400 for the front springs, they are installed but never run.
The rear blocks and u bolts will only work on a k20 and maybe only with the ho52 rear end, i would have to measure a dana 60 to see if its the same tube diameter.

I need $150 plus shipping, i think shipping will be about $150.

Madkidd007 · 07-30-2019, 08:46 PM

Since you just overlooked something I think these Ubolts will work just fine on any Leaf axle. They go around the springs and not the housing like round Ubolts The part that really would make the difference would just be the lower saddles and you just reuse originals anyways. So my point is, should fit all

*randy500* · 07-30-2019, 08:52 PM

Quote:

Originally Posted by Madkidd007

Since you just overlooked something I think these Ubolts will work just fine on any Leaf axle. They go around the springs and not the housing like round Ubolts The part that really would make the difference would just be the lower saddles and you just reuse originals anyways. So my point is, should fit all

Thanks, you are right!

*randy500* · 07-30-2019, 08:53 PM

Which means should fit k10 too because they have the same spring width.

*randy500* · 08-06-2019, 04:13 PM

Ttt

07-30-2019, 07:56 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Superlift 6” front lift springs, k10 or k20, rear blocks and u bolts These seem to be about $400 for the front springs, they are installed but never run. The rear blocks and u bolts will only work on a k20 and maybe only with the ho52 rear end, i would have to measure a dana 60 to see if its the same tube diameter. I need $150 plus shipping, i think shipping will be about $150. Attached Images

07-30-2019, 08:46 PM	#2
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,237	Re: Superlift 6” front lift springs, k10 or k20, rear blocks and u bolts Since you just overlooked something I think these Ubolts will work just fine on any Leaf axle. They go around the springs and not the housing like round Ubolts The part that really would make the difference would just be the lower saddles and you just reuse originals anyways. So my point is, should fit all __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

07-30-2019, 08:53 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Superlift 6” front lift springs, k10 or k20, rear blocks and u bolts Which means should fit k10 too because they have the same spring width.

08-06-2019, 04:13 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Superlift 6” front lift springs, k10 or k20, rear blocks and u bolts Ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.