SWB stepside bed wanted for 1967 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DevilDawg · 12-02-2003, 11:32 PM

I am restoring a 3/4 ton Chevy and need a stepside bed 1967 model. any help would be apreciated.
Thanks,
Jay Boddie

*dtlilly* · 12-02-2003, 11:41 PM

Welcome to the board from W. Tennessee.

A junk yard near me has a 67 with a short stepside bed on it that is clean (from the outside, can't see inside of bed- too much junk in it) The non-marker light fenders are dent free, but some dope smoking old man cut holes in the rear part of each of them to put tail lights in. The guy wants $600 for the bed. The drivers side has the spare tire cut-out in the fender. PM or e-mail me if you want more info.

superchevy · 12-03-2003, 11:43 AM

I have one for sale.
Here's the link to the post and pics:

http://www.67-72chevytrucks.com/vboa...threadid=79008

dbenamati · 12-03-2003, 12:16 PM

For a 67 3/4 ton, I think he is asking about a long step side bed (8 foot). I don't think they made 3/4 ton in a short bed..I may be wrong but I think that is what he needs.

Dave

JJR · 12-03-2003, 05:34 PM

I have these 67 fenders and 6' bedsides. I got them from a friend that needed to clean his yard out (bad neighbor). The mounting lips are solid but both have had fiberglass work done on the lower portions. They would be fine for a driver but if you are going for a show quality resto then these are probably not for you. I need to free up some shop space so I would let them go for $85 (I will take $75 if you take the bedsides also). I don't know if I would want to try to ship these or not. What part of Alabama are you in?

JJR · 12-03-2003, 05:35 PM

Here is a backside

JJR · 12-03-2003, 05:36 PM

Here are the bedsides. Some of the pockets will need work.

Baradium · 12-03-2003, 07:19 PM

Where's loganville?

JJR · 12-03-2003, 11:17 PM

"Where's Loganville" (The phrase made famous by Maxie Price Chevrolet) is on the east/northeast side of Atlanta about half way to Athens. It would be about 250 miles from Murfreesboro. However, I work in Marietta which would make it about 200 miles.

DevilDawg · 12-03-2003, 11:20 PM

Thanks everyone for your help, JJr I am located In Talladega county about 120 miles from Atlanta. my 67 has a diamond plate flat bed welded on It.I need to get ride of it. I need a complete box also. thanks again .
DevilDawg

**STP67-72** · 12-04-2003, 01:37 AM

I have a NICE lwb stepside 67 bed. I have everything but the tailgate. There is ZERO rust on all of the parts. Small dings only. I would say it is a number 9 <<<<<<. I want $550.00 for the complete bed without tailgate. I have removed the fenders and steps and put them in a barn. This is not JUNK. I posted pics. of bed box a couple weeks ago on this parts board. If interested let me know. I will be at AutoRama all weekend. I will not be online for a few days.
Thanks Steve

68 chevy truck-TPI · 04-10-2004, 07:05 PM

i have an excellent 67 driver side
fender with spair tire mount 150obo

robby · 04-10-2004, 11:42 PM

DevilDawg-Did you earn that title?

12-02-2003, 11:32 PM	#1
DevilDawg Registered User Join Date: Dec 2003 Location: Alabama Posts: 8	SWB stepside bed wanted for 1967 3/4 ton I am restoring a 3/4 ton Chevy and need a stepside bed 1967 model. any help would be apreciated. Thanks, Jay Boddie

12-03-2003, 12:16 PM	#4
dbenamati Registered User Join Date: Dec 1999 Location: hughesville, pa usa Posts: 337	I think he needs a long step For a 67 3/4 ton, I think he is asking about a long step side bed (8 foot). I don't think they made 3/4 ton in a short bed..I may be wrong but I think that is what he needs. Dave __________________ Dave Benamati Hughesville, PA USA

12-03-2003, 05:34 PM	#5
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	I have these 67 fenders and 6' bedsides. I got them from a friend that needed to clean his yard out (bad neighbor). The mounting lips are solid but both have had fiberglass work done on the lower portions. They would be fine for a driver but if you are going for a show quality resto then these are probably not for you. I need to free up some shop space so I would let them go for $85 (I will take $75 if you take the bedsides also). I don't know if I would want to try to ship these or not. What part of Alabama are you in? Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-03-2003, 05:35 PM	#6
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Here is a backside Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-03-2003, 05:36 PM	#7
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Here are the bedsides. Some of the pockets will need work. Attached Images __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-02-2003, 11:41 PM	#2
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Welcome to the board from W. Tennessee. A junk yard near me has a 67 with a short stepside bed on it that is clean (from the outside, can't see inside of bed- too much junk in it) The non-marker light fenders are dent free, but some dope smoking old man cut holes in the rear part of each of them to put tail lights in. The guy wants $600 for the bed. The drivers side has the spare tire cut-out in the fender. PM or e-mail me if you want more info.

12-03-2003, 11:43 AM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	I have one for sale. Here's the link to the post and pics: http://www.67-72chevytrucks.com/vboa...threadid=79008

12-03-2003, 07:19 PM	#8
Baradium Binder Rep Join Date: Jan 2001 Location: Salcha, AK Posts: 1,506	Where's loganville?

12-03-2003, 11:17 PM	#9
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	"Where's Loganville" (The phrase made famous by Maxie Price Chevrolet) is on the east/northeast side of Atlanta about half way to Athens. It would be about 250 miles from Murfreesboro. However, I work in Marietta which would make it about 200 miles. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

12-03-2003, 11:20 PM	#10
DevilDawg Registered User Join Date: Dec 2003 Location: Alabama Posts: 8	Thanks everyone for your help, JJr I am located In Talladega county about 120 miles from Atlanta. my 67 has a diamond plate flat bed welded on It.I need to get ride of it. I need a complete box also. thanks again . DevilDawg

12-04-2003, 01:37 AM	#11
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	bed I have a NICE lwb stepside 67 bed. I have everything but the tailgate. There is ZERO rust on all of the parts. Small dings only. I would say it is a number 9 <<<<<<. I want $550.00 for the complete bed without tailgate. I have removed the fenders and steps and put them in a barn. This is not JUNK. I posted pics. of bed box a couple weeks ago on this parts board. If interested let me know. I will be at AutoRama all weekend. I will not be online for a few days. Thanks Steve

04-10-2004, 07:05 PM	#12
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	67 fender f/s i have an excellent 67 driver side fender with spair tire mount 150obo

04-10-2004, 11:42 PM	#13
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	DevilDawg-Did you earn that title? __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.