'72 Cheyenne K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimbosprint · 09-18-2019, 10:23 PM

I just bought this '72 Cheyenne K10 from a friend today! As you might guess, it's been sitting in the woods nearby for more than a decade. It started life as a 2wd, and the previous owner restored and converted it to 4wd many years ago. He dropped it off the trailer this morning and I spent a little time with it today. It's beat to hell and was covered in spider webs, but a battery and some gas in the carb had it trying to start. I don't know exactly what I want to do with it yet, but it's a cool project!

70 cst · 09-18-2019, 11:30 PM

Cool find! I’ve enjoyed watching your other build so I’m in to watch what you do with this one as well!

jimbosprint · 09-19-2019, 03:10 PM

Cleaned up the cab and engine compartment a little. At least now I can see what I'm doing. Oil, coolant, and brake fluid are topped off. Now I need to get some good gas to the engine and get it to fire up. Not sure if I should go ahead and pull the tank out or try to get it running temporarily off a gas can first.

Name: 20190919_095017.jpg
Views: 5082
Size: 107.1 KB

Name: 20190919_095017.jpg
Views: 5082
Size: 107.1 KB

Name: 20190919_105934.jpg
Views: 5122
Size: 56.2 KB

674wd · 05-07-2020, 11:08 PM

You have a factory Air Condition cab. You might want to think about vintage air if you are really going to fix it up.

jimbosprint · 09-19-2019, 10:31 PM

I hooked it up to a gas can, cleaned out the fuel pump, and replaced the filter, and... it runs! Pretty good actually. I just have to get the gas tank cleaned out and hooked back up.

It acts like the parking brake is stuck on, so next step is to figure out why the wheels don't roll.

flashed · 09-19-2019, 10:55 PM

Im in to see more , rear brakes are probably rusted up

jimbosprint · 09-20-2019, 11:33 AM

Some video of it running for the first time in years - https://youtu.be/YXoU3suSfGE

El Dorado Jim · 11-18-2019, 12:48 AM

Quote:

Originally Posted by jimbosprint

Some video of it running for the first time in years - https://youtu.be/YXoU3suSfGE

Nice, sounds good!!

**DeadheadNM** · 09-20-2019, 11:36 AM

Congrats. Nice save.

jimbosprint · 09-24-2019, 06:25 PM

Front calipers were rusty crusty and stuck. I freed it up so the truck rolls, but they will need to be replaced. The locking hub doesn't seem to work on the driver side.

Name: 20190924_102026.jpg
Views: 4841
Size: 44.5 KB

Name: 20190924_102026.jpg
Views: 4841
Size: 44.5 KB

jimbosprint · 09-29-2019, 01:36 PM

I got the Tommy Lift to work! Still gonna take it off since I have the original tailgate. Yes, those are bullet holes in the passenger bedside.

Name: 20190929_093911.jpg
Views: 4847
Size: 50.0 KB

Name: 20190929_093911.jpg
Views: 4847
Size: 50.0 KB

Name: 20190929_093950.jpg
Views: 4780
Size: 46.4 KB

CG · 09-29-2019, 07:46 PM

Id love to find a Tommy Lift like that up here.

Cool project!

jimbosprint · 09-30-2019, 03:53 PM

Original tailgate is back on the truck. Needs a bumper.

Name: 20190930_115219.jpg
Views: 4776
Size: 65.0 KB

Name: 20190930_123611.jpg
Views: 4688
Size: 65.5 KB

Name: 20190930_122847.jpg
Views: 4650
Size: 72.4 KB

jimbosprint · 10-01-2019, 07:58 PM

More photos

Name: 20190930_081809.jpg
Views: 4644
Size: 56.0 KB

Name: 20191001_155428.jpg
Views: 4560
Size: 50.8 KB

Name: 20191001_155504.jpg
Views: 4598
Size: 55.4 KB

Name: 20191001_155845.jpg
Views: 4567
Size: 39.7 KB

10-01-2019, 10:39 PM

Nice project; I don't see much rust on that rig--I assume always an inland Socal truck?

jimbosprint · 10-02-2019, 12:10 PM

Quote:

Originally Posted by Martyt

Nice project; I don't see much rust on that rig--I assume always an inland Socal truck?

I don't know how it survived so well. It was buried under pine needles in Cohasset (Sierra foothills of Norcal) for the last decade.

jimbosprint · 11-11-2019, 04:22 AM

Still working on title for this old beast. DMV wants a weight certificate, so I'll tow it to the public scales next week. Good excuse to use the C20 Deluxe.

**Ol Blue K20** · 11-11-2019, 10:49 AM

Take out as much weight as you can. DMV will charge for every pound every year on the reg..

El Dorado Jim · 11-18-2019, 12:47 AM

Quote:

Originally Posted by Ol Blue K20

Take out as much weight as you can. DMV will charge for every pound every year on the reg..

yep, take that tow hitch off and even the tailgate

jimbosprint · 11-18-2019, 11:56 AM

Quote:

Originally Posted by El Dorado Jim

yep, take that tow hitch off and even the tailgate

I got it down to 4060lbs. No seat, gas tank, or battery. Probably could have gotten it under 4000 if I took the tow hitch off. I plan to get rid of that anyways, so I really should have.

cornerstone · 11-18-2019, 12:35 PM

Quote:

Originally Posted by Ol Blue K20

DMV will charge for every pound every year on the reg..

Yet another example of why I love TEXAS.

jimbosprint · 11-18-2019, 01:44 PM

Quote:

Originally Posted by cornerstone

Yet another example of why I love TEXAS.

I won't have to take my trucks in for inspection. Ever.

**WIDESIDE72** · 11-28-2019, 12:37 PM

Quote:

Originally Posted by jimbosprint

I won't have to take my trucks in for inspection. Ever.

Cool truck. Not a good enough reason to live in CA, imo. Besides, if registered as an antique in Texas, there is no safety inspection. Texas safety inspection is actually not a big deal. If you cant pass it, i agree that the vehicle shouldn't be on the road. They only inspect for all lights to work, working wipers, horn decent brakes and tires. No emission testing on vehicles 25 years old and older.

Ptjsk · 12-03-2019, 05:25 PM

Quote:

Originally Posted by WIDESIDE72

Cool truck. Not a good enough reason to live in CA, imo. Besides, if registered as an antique in Texas, there is no safety inspection. Texas safety inspection is actually not a big deal. If you cant pass it, i agree that the vehicle shouldn't be on the road. They only inspect for all lights to work, working wipers, horn decent brakes and tires. No emission testing on vehicles 25 years old and older.

For what it's worth, he (and I), live in Northern CA. Completely different from what most people view California as, and definitely nothing like San Francisco, Los Angeles, San Diego, Silicon Valley ect.

Unfortunately, we fall under the same government that these areas (azz hats), put into office.

I keep waiting for Nevada to re-align the State and reach down to pick us up! LOL!

Pat

jimbosprint · 11-25-2019, 03:41 PM

Plans are starting to come together for this truck. First step is take out the 2" body lift. I don't like the way it looks, and I don't need the extra lift because I only plan to run 33" tires. Brakes, steering and suspension components will be restored, it will get new wagon wheels, and I'll find some bucket seats at the junkyard. I need to do a tune-up and oil change, and it will probably get a new carburetor.

Name: 20191125_085754.jpg
Views: 4174
Size: 61.5 KB

Name: 20191125_085754.jpg
Views: 4174
Size: 61.5 KB

Name: 20191120_122255.jpg
Views: 4242
Size: 52.5 KB

Name: 20191125_091824.jpg
Views: 4313
Size: 52.2 KB

Name: 20191125_091044.jpg
Views: 4303
Size: 60.5 KB

09-18-2019, 10:23 PM	#1
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	'72 Cheyenne K10 I just bought this '72 Cheyenne K10 from a friend today! As you might guess, it's been sitting in the woods nearby for more than a decade. It started life as a 2wd, and the previous owner restored and converted it to 4wd many years ago. He dropped it off the trailer this morning and I spent a little time with it today. It's beat to hell and was covered in spider webs, but a battery and some gas in the carb had it trying to start. I don't know exactly what I want to do with it yet, but it's a cool project! Attached Images __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold) Last edited by jimbosprint; 09-18-2019 at 10:57 PM.

09-18-2019, 11:30 PM	#2
70 cst Registered User Join Date: Dec 2011 Location: somerset ky Posts: 63	Re: '72 Cheyenne K10 Cool find! I’ve enjoyed watching your other build so I’m in to watch what you do with this one as well!

09-19-2019, 03:10 PM	#3
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Cleaned up the cab and engine compartment a little. At least now I can see what I'm doing. Oil, coolant, and brake fluid are topped off. Now I need to get some good gas to the engine and get it to fire up. Not sure if I should go ahead and pull the tank out or try to get it running temporarily off a gas can first. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

05-07-2020, 11:08 PM	#4
674wd Registered User Join Date: Nov 2011 Location: Jackson, Wisconsin Posts: 16	Re: '72 Cheyenne K10 You have a factory Air Condition cab. You might want to think about vintage air if you are really going to fix it up.

09-19-2019, 10:31 PM	#5
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 I hooked it up to a gas can, cleaned out the fuel pump, and replaced the filter, and... it runs! Pretty good actually. I just have to get the gas tank cleaned out and hooked back up. It acts like the parking brake is stuck on, so next step is to figure out why the wheels don't roll. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

09-19-2019, 10:55 PM	#6
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: '72 Cheyenne K10 Im in to see more , rear brakes are probably rusted up

09-20-2019, 11:33 AM	#7
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Some video of it running for the first time in years - https://youtu.be/YXoU3suSfGE __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

09-20-2019, 11:36 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: '72 Cheyenne K10 Congrats. Nice save. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-24-2019, 06:25 PM	#10
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Front calipers were rusty crusty and stuck. I freed it up so the truck rolls, but they will need to be replaced. The locking hub doesn't seem to work on the driver side. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

09-29-2019, 01:36 PM	#11
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 I got the Tommy Lift to work! Still gonna take it off since I have the original tailgate. Yes, those are bullet holes in the passenger bedside. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

09-29-2019, 07:46 PM	#12
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: '72 Cheyenne K10 Id love to find a Tommy Lift like that up here. Cool project! __________________ … … … … … … … … ... … … … … … … … … … … …

09-30-2019, 03:53 PM	#13
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Original tailgate is back on the truck. Needs a bumper. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

10-01-2019, 07:58 PM	#14
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 More photos __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

10-01-2019, 10:39 PM	#15
Martyt Guest Posts: n/a	Re: '72 Cheyenne K10 Nice project; I don't see much rust on that rig--I assume always an inland Socal truck?

11-11-2019, 04:22 AM	#17
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Still working on title for this old beast. DMV wants a weight certificate, so I'll tow it to the public scales next week. Good excuse to use the C20 Deluxe. Attached Images __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)



Register or Log In To remove these advertisements.

11-11-2019, 10:49 AM	#18
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: '72 Cheyenne K10 Take out as much weight as you can. DMV will charge for every pound every year on the reg.. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

11-25-2019, 03:41 PM	#25
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: '72 Cheyenne K10 Plans are starting to come together for this truck. First step is take out the 2" body lift. I don't like the way it looks, and I don't need the extra lift because I only plan to run 33" tires. Brakes, steering and suspension components will be restored, it will get new wagon wheels, and I'll find some bucket seats at the junkyard. I need to do a tune-up and oil change, and it will probably get a new carburetor. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold) Last edited by jimbosprint; 11-25-2019 at 04:09 PM.

Register or Log In To remove these advertisements.