72 SWB Fleetside Exhaust Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cam1968rsss** · 03-03-2020, 03:19 PM

Hi all, am installing a new dual exhaust system on my 72 SWB. The bed is currently no ton the frame and I was wondering if any you might have any idea about how far behind the rear tire the exhaust should come out from under the body? Kid of looking to keep near a stock or factory location. Thanks for your time.

Wrenchbender Ret · 03-03-2020, 04:33 PM

That would be a hard way to determin the location. iT could vary by the tire size & location in the tire rack. It seems the best way would be to leave them a little longer then necessary & cut them off after the bed is on.

stomper · 03-03-2020, 07:48 PM

Here's what I did.

**70STOVEBOLT** · 03-03-2020, 09:39 PM

This is the best pic I could get right now, but I used a Pypes system. Md this the exit location they use. My truck is stock height.

**davischevy** · 03-03-2020, 11:36 PM

This

03-03-2020, 03:19 PM	#1
Cam1968rsss Senior Member Join Date: Oct 2010 Location: Zavalla, TX Posts: 427	72 SWB Fleetside Exhaust Question Hi all, am installing a new dual exhaust system on my 72 SWB. The bed is currently no ton the frame and I was wondering if any you might have any idea about how far behind the rear tire the exhaust should come out from under the body? Kid of looking to keep near a stock or factory location. Thanks for your time.

03-03-2020, 04:33 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: 72 SWB Fleetside Exhaust Question That would be a hard way to determin the location. iT could vary by the tire size & location in the tire rack. It seems the best way would be to leave them a little longer then necessary & cut them off after the bed is on.

03-03-2020, 07:48 PM	#3
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,701	Re: 72 SWB Fleetside Exhaust Question Here's what I did. Attached Images __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

03-03-2020, 09:39 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: 72 SWB Fleetside Exhaust Question This is the best pic I could get right now, but I used a Pypes system. Md this the exit location they use. My truck is stock height. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-03-2020, 11:36 PM	#5
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: 72 SWB Fleetside Exhaust Question This Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.