|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-06-2020, 05:30 PM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: Florida
Posts: 1,684
|
inline tube brake lines and hoses
Replacing my front lines, went with their ss kit.
2 things * Gotta do a lot of bending to get these to work, hope they seal... * on the hoses, the "nut" fitting does not fit into frame like the factory hoses. The nut is too big, soI just tightened down the fitting on the frame with the big nut on the inside, no clips. Anyone use their lines/hoses and have same experience? Seems like it would be fine? Let me know.
__________________
1986 C10 SWB 6.0/6l90e Miami...Flee it like a native |
|
|
|
03-12-2020, 07:33 AM
|
#2 |
|
Registered User
Join Date: Nov 2019
Location: Beaverton, Oregon
Posts: 5
|
Re: inline tube brake lines and hoses
I used their ss kit on my 69. I ended up throwing half of the kit away, only actually used the front crossover line, line to LF, crossover line for rear, and line to rear. Lines for axle didn't work whatsoever, and I went Wilwood master so all lines associated up to there were useless for me. Going forward, I will forever build my own from scratch fully.
|
|
|
|
|
03-14-2020, 12:54 AM
|
#3 |
|
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,179
|
Re: inline tube brake lines and hoses
It's hit or miss. I have had good luck and bad with them. They don't want to hear that their product is bad even if you get a machinist to tell them that the flare is incorrect. Customer service is lacking at most....
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van" |
|
|
|
|
03-15-2020, 09:02 PM
|
#4 |
|
Registered User
Join Date: Aug 2006
Location: Florida
Posts: 1,684
|
Re: inline tube brake lines and hoses
I figured as much...went and bought new calipers and another set of hoses from napa, and the dang hoses don't fit. The fitting on the caliper is WAY too big and can't even get it in the groove. Wasted more time and $ on these brakes.
Tools and parts will be flying soon...VERY soon. Had to walk away today.
__________________
1986 C10 SWB 6.0/6l90e Miami...Flee it like a native |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
