rearends, frontends and more!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 12-12-2003, 05:25 PM

Here are some 14 bolt Dana rearends I have plus a couple 10 bolts

teeitup · 12-12-2003, 05:26 PM

10 Dana 44 frontends, our style and newer. About 5 or so 3/4 frontends around, still sorting there are more to come!

teeitup · 12-12-2003, 05:30 PM

three 3/4 2wd rearends non posi

boilrman · 12-12-2003, 05:59 PM

keep me in mind while going through those 3/4t rears. It may be a bit before I can come get it but I can get it paid for.

Thanks

Chad

teeitup · 12-12-2003, 06:09 PM

Chad, your first in line on the ones you asked me about, I'm trying to figure out ratio on them, two of the them have 32 teeth, the other has 41, they are open rears. Thanks Randy

724x4a/cchevy · 12-12-2003, 06:09 PM

How much are you asking on those 4x4 front ends?

724x4a/cchevy · 12-12-2003, 06:10 PM

would you be willing to sell the front sway bars off any of those dana 44s?

teeitup · 12-12-2003, 06:20 PM

I'll pm you.

**MJN** · 12-12-2003, 07:06 PM

any 12 bolt rears with 4:10's (posi would be a plus) thanks

nu2-72 · 12-12-2003, 07:42 PM

Randy, seems my email server is down again. How is tomorrow for you?

teeitup · 12-12-2003, 08:54 PM

MJN, Sorry no 12 bolt posi's
Kevin tomorrow afternoon about 3 would work, I got to deliver a truck to KC in the morning if its not snowing to much.
Thanks Randy

nu2-72 · 12-12-2003, 11:36 PM

Just spoke with Rob. Saturday is no good. Sunday is better for him. How is that?

Baradium · 12-12-2003, 11:39 PM

Do you have prices for anything?

Don't know if I can afford anything right now but I'm looking for a 14 bolt or dana 60 f/f rear and matching front (HD-44 fine) for the panel project. Going to snoop around to see what I dig up once I get in GA, but I'm looking everywhere at the moment.

teeitup · 12-13-2003, 12:40 AM

Kevin, Sunday is fine, let me know what time, I found some blue door panels too!
Baradium, I'll get some prices on these, I just posted pics to let guys see what I'm getting in. I'm sure I'll have what your looking for.
Thanks Randy

Destructo · 12-13-2003, 12:44 AM

Ever make any trips out to NC? If so let me know I may be interested in a 14ff out of a 3/4 ton that will fit a 73-87 truck. Also a matching front end if you have one with the same ratio, HD-44, I don't have the money to spend on D60 front ends, those suckers are costy! And getting rare to find too!

Actually I may have spotted one in a yard last time I was out there, gonna run back out there sometime and check it out to make sure its really a D60 and see what they want for it.

teeitup · 12-13-2003, 01:13 AM

Sorry never out that far, pretty much just surrounding state here. I hope you found a Dana 60, those are nice ones. Thanks Randy

Destructo · 12-13-2003, 01:15 AM

Ya, I swear this one didn't look like a 10 bolt when I looked under it, and I don't think it could be anything else. So I should probably go check it out before someone else finds it. Chances are the yard doesn't even know what its worth anyway. Its still under the truck with wheels on it. Rearend has "no oil" written on it though so maybe its not good anyway. But it could probably be rebuilt.

nu2-72 · 12-13-2003, 11:33 AM

I will call him this afternoon and let you know here or by PM. I think PM's will still work. My email is still down. They had a wrestling tourny today.

Bartcore · 12-18-2003, 07:23 AM

what are gears are in those chevy 14 bolts u got ? You got any Rockwell duece stuff ?

teeitup · 12-18-2003, 07:33 AM

I know there is 4.56 for sure, I haven't checked the others, not sure on the rockwells, I have a few of them out of 68 4x4's, no shipping on any of this stuff though. Thanks Randy

Chevyguy111786 · 12-18-2003, 01:32 PM

Hey teeitup,
You got a front end off a 3/4 or 1 ton 2WD, like A-arms, springs, spindle, hubs, brakes? basically the whole front end...

teeitup · 12-18-2003, 06:06 PM

I've had 4-5 of them in the past year an nobody ever wanted anything, they went to scrapyard, sorry. Thanks Randy

Baradium · 12-18-2003, 10:38 PM

you going to post prices for us maybe?

Thanks,
Ryan

teeitup · 12-19-2003, 10:45 AM

I will when I get time to see what I have, are you going to drive up here from Tennesee to get them?

truckpower429 · 12-20-2003, 01:00 AM

hay teeitup,
I was wandering if you have the panard bar for a 3/4 ton, with coils, and gm rear axle. if you do, shoot me a price for it.
thanks

12-12-2003, 05:25 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	rearends, frontends and more!!! Here are some 14 bolt Dana rearends I have plus a couple 10 bolts __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 05:26 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	10 Dana 44 frontends, our style and newer. About 5 or so 3/4 frontends around, still sorting there are more to come! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 05:30 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	three 3/4 2wd rearends non posi __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 05:59 PM	#4
boilrman 70 Chevy 3/4t Join Date: Sep 2000 Location: Kokomo,IN USA Posts: 1,230	keep me in mind while going through those 3/4t rears. It may be a bit before I can come get it but I can get it paid for. Thanks Chad __________________ Find a job you love and you'll never have to work a day in your life. 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6 (rebuilt), 4 speed Kokomo,IN

12-12-2003, 06:09 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Chad, your first in line on the ones you asked me about, I'm trying to figure out ratio on them, two of the them have 32 teeth, the other has 41, they are open rears. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 06:09 PM	#6
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	How much are you asking on those 4x4 front ends? __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-12-2003, 06:10 PM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	would you be willing to sell the front sway bars off any of those dana 44s? __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-12-2003, 06:20 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I'll pm you. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 07:06 PM	#9
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,052	any 12 bolt rears with 4:10's (posi would be a plus) thanks __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

12-12-2003, 07:42 PM	#10
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Randy, seems my email server is down again. How is tomorrow for you? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-12-2003, 08:54 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	MJN, Sorry no 12 bolt posi's Kevin tomorrow afternoon about 3 would work, I got to deliver a truck to KC in the morning if its not snowing to much. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-12-2003, 11:36 PM	#12
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Just spoke with Rob. Saturday is no good. Sunday is better for him. How is that? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-12-2003, 11:39 PM	#13
Baradium Binder Rep Join Date: Jan 2001 Location: Salcha, AK Posts: 1,506	Do you have prices for anything? Don't know if I can afford anything right now but I'm looking for a 14 bolt or dana 60 f/f rear and matching front (HD-44 fine) for the panel project. Going to snoop around to see what I dig up once I get in GA, but I'm looking everywhere at the moment.

12-13-2003, 12:40 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Kevin, Sunday is fine, let me know what time, I found some blue door panels too! Baradium, I'll get some prices on these, I just posted pics to let guys see what I'm getting in. I'm sure I'll have what your looking for. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-13-2003, 12:44 AM	#15
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Ever make any trips out to NC? If so let me know I may be interested in a 14ff out of a 3/4 ton that will fit a 73-87 truck. Also a matching front end if you have one with the same ratio, HD-44, I don't have the money to spend on D60 front ends, those suckers are costy! And getting rare to find too! Actually I may have spotted one in a yard last time I was out there, gonna run back out there sometime and check it out to make sure its really a D60 and see what they want for it.



Register or Log In To remove these advertisements.

12-13-2003, 01:13 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Sorry never out that far, pretty much just surrounding state here. I hope you found a Dana 60, those are nice ones. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-13-2003, 01:15 AM	#17
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Ya, I swear this one didn't look like a 10 bolt when I looked under it, and I don't think it could be anything else. So I should probably go check it out before someone else finds it. Chances are the yard doesn't even know what its worth anyway. Its still under the truck with wheels on it. Rearend has "no oil" written on it though so maybe its not good anyway. But it could probably be rebuilt.

12-13-2003, 11:33 AM	#18
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I will call him this afternoon and let you know here or by PM. I think PM's will still work. My email is still down. They had a wrestling tourny today. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

12-18-2003, 07:23 AM	#19
Bartcore Registered User Join Date: Dec 2003 Location: Bennett Valley Ca. Posts: 205	what are gears are in those chevy 14 bolts u got ? You got any Rockwell duece stuff ? __________________ 1970 1 ton K5 on 38.5's

12-18-2003, 07:33 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I know there is 4.56 for sure, I haven't checked the others, not sure on the rockwells, I have a few of them out of 68 4x4's, no shipping on any of this stuff though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-18-2003, 01:32 PM	#21
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Hey teeitup, You got a front end off a 3/4 or 1 ton 2WD, like A-arms, springs, spindle, hubs, brakes? basically the whole front end...

12-18-2003, 06:06 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I've had 4-5 of them in the past year an nobody ever wanted anything, they went to scrapyard, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-18-2003, 10:38 PM	#23
Baradium Binder Rep Join Date: Jan 2001 Location: Salcha, AK Posts: 1,506	you going to post prices for us maybe? Thanks, Ryan

12-19-2003, 10:45 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I will when I get time to see what I have, are you going to drive up here from Tennesee to get them? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-20-2003, 01:00 AM	#25
truckpower429 Registered User Join Date: Nov 2003 Location: Okc, Oklahoma Posts: 33	hay teeitup, I was wandering if you have the panard bar for a 3/4 ton, with coils, and gm rear axle. if you do, shoot me a price for it. thanks

Register or Log In To remove these advertisements.