IA No Spin Differential Decals/Stickers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 07-07-2020, 02:24 PM

-
I made these NoSpins up by request and I have a some extras. They are not 100% correct but they are pretty close. I have a lot of time in the re-construction work on this and to the best of my knowledge they are not available through any regular vendors. They are printed on vinyl and have a tough, clear laminate layer on the top surface. It is almost impossible to get a decent picture of them so if you order one and are not happy with it I will refund your money except for the cost to send it back to me. I think they look better in person than in the picture as it makes them look very dull (which they are not) and doesn't show the metallic background very well. They have a peel & stick backing on them. The consensus is that the KS-10 is what was used for the ½ and ¾ ton ‘67-‘72 trucks….. The price is $5.70 shipped for one and each additional one would be $5.00, on the same order.

PayPal, Money Order, or Check works for me.

Per board rules post in thread before sending any PM's.

Thanks for looking.

LockDoc

**omodified** · 07-07-2020, 03:04 PM

I received mine Yesterday Leon. Absolutely beautiful and great attention to detail. I’m not ready to install it yet but it’s going to look awesome right behind the driver’s seat. Thanks for doing these!

**LockDoc** · 07-07-2020, 03:25 PM

Quote:

Originally Posted by omodified

I received mine Yesterday Leon. Absolutely beautiful and great attention to detail. I’m not ready to install it yet but it’s going to look awesome right behind the driver’s seat. Thanks for doing these!

Good deal! Thanks for the follow up.

LockDoc

Rwsmith66@yahoo.com · 07-07-2020, 03:28 PM

I'll take one.Thanks,Robt

**special-K** · 07-07-2020, 04:05 PM

Looks very correct, but not 100% because the originals didn't say 'sample' on them

I'll take one. Finally, a part I can afford! I'll mail a m.o.

**LockDoc** · 07-07-2020, 04:09 PM

Quote:

Originally Posted by Rwsmith66@yahoo.com

I'll take one.Thanks,Robt

Quote:

Originally Posted by special-K

Looks very correct, but not 100% because the originals didn't say 'sample' on them

I'll take one. Finally, a part I can afford! I'll mail a m.o.

PM's sent. Thanks guys.

LockDoc

Rwsmith66@yahoo.com · 07-07-2020, 04:18 PM

Quote:

Originally Posted by LockDoc

PM's sent. Thanks guys.

LockDoc

PayPal sent.Thanks,Robt

Terrysch · 07-07-2020, 04:48 PM

Leon,
Where was this decal installed?
Terry

**LockDoc** · 07-07-2020, 06:01 PM

Quote:

Originally Posted by Terrysch

Leon,
Where was this decal installed?
Terry

Terry,

In the first batch of these I made there was some discussion on that, and it seems like the conclusion was that they were included in a packet in the glove box and the owner decided where, when, and if he wanted to put them on. Members reported seeing them on the dash, glove box door, above the windshield, and just below the rear window behind the drivers seat.

I guess a person could do the same today, just put them wherever they wanted. I'm sure there was probably a suggestion in the packet on where to put them but I have never seen any documentation on it. Some of them have been found still in the packet and never installed.

LockDoc

**ShortbedClayton** · 07-08-2020, 07:04 AM

I’ll take two of these. Thanks
Posted via Mobile Device

**LockDoc** · 07-08-2020, 12:11 PM

Quote:

Originally Posted by ShortbedClayton

I’ll take two of these. Thanks
Posted via Mobile Device

PM sent.

Thanks,
LockDoc

**ShortbedClayton** · 07-08-2020, 01:41 PM

Quote:

Originally Posted by LockDoc

PM sent.

Thanks,
LockDoc

PayPal sent. Thanks again
Posted via Mobile Device

**LockDoc** · 07-08-2020, 02:05 PM

Quote:

Originally Posted by ShortbedClayton

PayPal sent. Thanks again
Posted via Mobile Device

Thanks Clayton.

You will need to PM me your address.

LockDoc

Brad54 · 07-09-2020, 01:06 AM

Yeah, I'm gonna need two of those.
Please send me your PP info in a PM.
Thanks!

**LockDoc** · 07-09-2020, 08:28 AM

Quote:

Originally Posted by Brad54

Yeah, I'm gonna need two of those.
Please send me your PP info in a PM.
Thanks!

PM sent.

Thanks,
LockDoc

Terrysch · 07-09-2020, 02:12 PM

Thanks for your reply Leon.
I will take one for my Jimmy.
Please PM your PayPal.
Know it has the Eaton no-spin from the number, coding on the axle tube.
And does still has the original rear diff from when I changed the gear oil and inspected the gearing.
Thanks!
Terry

**LockDoc** · 07-09-2020, 06:56 PM

Quote:

Originally Posted by Terrysch

Thanks for your reply Leon.
I will take one for my Jimmy.
Please PM your PayPal.
Know it has the Eaton no-spin from the number, coding on the axle tube.
And does still has the original rear diff from when I changed the gear oil and inspected the gearing.
Thanks!
Terry

PM sent.

Thanks Terry.

LockDoc

Terrysch · 07-11-2020, 12:00 PM

Leon,
I sent payment to your PayPal.
Please forward tracking info. when you ship the decal.
Great little project. Thanks for doing this!
Terry

sscooter · 01-11-2022, 11:02 AM

PM Sent...

I'll take one! Thanks

**LockDoc** · 01-11-2022, 04:01 PM

Quote:

Originally Posted by sscooter

PM Sent...

I'll take one! Thanks

Sending PM.

Thanks,
LockDoc

69Penka · 06-11-2023, 12:11 PM

Hey Lock are these still available? Thank you

**LockDoc** · 06-11-2023, 08:56 PM

Quote:

Originally Posted by 69Penka

Hey Lock are these still available? Thank you

Yes, I still have some. Sending PM.

Thanks,
LockDoc

69Penka · 06-11-2023, 10:54 PM

Hey Leon,

PM and payment sent.

Thank you!

**DeadheadNM** · 05-23-2024, 03:41 PM

Was looking at OE No Spin paperwork last night and noticed this placement recommendation on the envelope…

**LockDoc** · 05-24-2024, 10:56 PM

Quote:

Originally Posted by DeadheadNM

Was looking at OE No Spin paperwork last night and noticed this placement recommendation on the envelope…

Thanks for that info Pete.

LockDoc

07-07-2020, 02:24 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,796	No Spin Differential Decals/Stickers - I made these NoSpins up by request and I have a some extras. They are not 100% correct but they are pretty close. I have a lot of time in the re-construction work on this and to the best of my knowledge they are not available through any regular vendors. They are printed on vinyl and have a tough, clear laminate layer on the top surface. It is almost impossible to get a decent picture of them so if you order one and are not happy with it I will refund your money except for the cost to send it back to me. I think they look better in person than in the picture as it makes them look very dull (which they are not) and doesn't show the metallic background very well. They have a peel & stick backing on them. The consensus is that the KS-10 is what was used for the ½ and ¾ ton ‘67-‘72 trucks….. The price is $5.70 shipped for one and each additional one would be $5.00, on the same order. PayPal, Money Order, or Check works for me. Per board rules post in thread before sending any PM's. Thanks for looking. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; Yesterday at 12:33 PM. Reason: Updated price for postage increase

07-07-2020, 03:04 PM	#2
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,034	Re: No Spin Differential Decals/Stickers I received mine Yesterday Leon. Absolutely beautiful and great attention to detail. I’m not ready to install it yet but it’s going to look awesome right behind the driver’s seat. Thanks for doing these! __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

07-07-2020, 03:28 PM	#4
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: No Spin Differential Decals/Stickers I'll take one.Thanks,Robt

07-07-2020, 04:05 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: No Spin Differential Decals/Stickers Looks very correct, but not 100% because the originals didn't say 'sample' on them I'll take one. Finally, a part I can afford! I'll mail a m.o. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-07-2020, 04:48 PM	#8
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 573	Re: No Spin Differential Decals/Stickers Leon, Where was this decal installed? Terry

07-08-2020, 07:04 AM	#10
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Re: No Spin Differential Decals/Stickers I’ll take two of these. Thanks Posted via Mobile Device

07-09-2020, 01:06 AM	#14
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: No Spin Differential Decals/Stickers Yeah, I'm gonna need two of those. Please send me your PP info in a PM. Thanks! __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

07-09-2020, 02:12 PM	#16
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 573	Re: No Spin Differential Decals/Stickers Thanks for your reply Leon. I will take one for my Jimmy. Please PM your PayPal. Know it has the Eaton no-spin from the number, coding on the axle tube. And does still has the original rear diff from when I changed the gear oil and inspected the gearing. Thanks! Terry

07-11-2020, 12:00 PM	#18
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 573	Re: No Spin Differential Decals/Stickers Leon, I sent payment to your PayPal. Please forward tracking info. when you ship the decal. Great little project. Thanks for doing this! Terry

01-11-2022, 11:02 AM	#19
sscooter Registered User Join Date: May 2011 Location: minneapolis, mn Posts: 63	Re: No Spin Differential Decals/Stickers PM Sent... I'll take one! Thanks

06-11-2023, 12:11 PM	#21
69Penka Registered User Join Date: Feb 2022 Location: Hernandez, NM Posts: 72	Re: No Spin Differential Decals/Stickers Hey Lock are these still available? Thank you

06-11-2023, 10:54 PM	#23
69Penka Registered User Join Date: Feb 2022 Location: Hernandez, NM Posts: 72	Re: No Spin Differential Decals/Stickers Hey Leon, PM and payment sent. Thank you!

05-23-2024, 03:41 PM	#24
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: No Spin Differential Decals/Stickers Was looking at OE No Spin paperwork last night and noticed this placement recommendation on the envelope… Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.