The new Ole Sarge Customs shop

[skymangs]

The building is 70x30. Uninsulated, no power. There is a dividing wall providing a 40 ft (with a ceiling),and a 30ft unfinished side.

[skymangs]

This is the inside

[skymangs]

I immediately commissioned a friend to wire the shop. As a shop. 200 Amp main with 4 dedicated 220V circuits, 1 20 amp breaker for each wall, 15 amp for lights only.

[skymangs]

I also had him install garage door openers on every door, and motion detector LEDs outside

[skymangs]

Next we found a working 1946 Philco refrigerator, and I knew it was perfect for the shop!

[skymangs]

Then a good friend of mine started petitioning tool manufacturers and telling them my story. I received several care packages. We also decided that a proper bench should be 16ft, and set about extending it. Alex got a new toolbox too.

[The Rocknrod]

Great work, keep us posted.

[skymangs]

Originally Posted by The Rocknrod

Great work, keep us posted.

Thanks

[skymangs]

And now I’m having an additional 24x40 building constructed to move some of my cars and open up some bay space. It should be finished on Monday.

[LockDoc]

-
Looks good Sarge. It should make you guys a great shop with plenty of room. Glad to see you getting set back up.....

LockDoc

[Liz]

That is a great space. I know you are happy

[skymangs]

When I say that we have "closed”, we merely went from being a business to an active hobby until such time as we can employ a full time work force.

[skymangs]

We’re also taking bids to extend the shop another 10', making it 30x80. Moving that useless side door to the front and an 8x10 Office just left of the man door.

[skymangs]

The new building is finished, waiting on the overhead doors and gravel.

[skymangs]

Here’s an overall shot of the property.

[67C10Step]

A man can never have too much covered space, especially if you are into automobiles.

Looking fantastic.

[skymangs]

Right?

[skymangs]

after nearly 6 years of sitting derelict, exposed to the weather. we finally got the old 8N running and transported it to the shop!

[skymangs]

today we built a rack to hold our new steel (my design). not done yet, will finish this week.

[skymangs]

we finally got the steel rack finished yesterday!

[Redneck Rydes]

Man that looks great and very handy.

[skymangs]

Yeah, way better than a pile in the corner!

[72 Super]

Very nice shop.

Ray

[skymangs]

Thank you, we are constantly improving it

[skymangs]

we finally managed to close up that hole in the ceiling for the garage door opener, so now we can put blow in insulation up there!