![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2017
Location: Red Oak Iowa
Posts: 225
|
'60 Exhaust
Since my carburetor has me stymied right now I spent the afternoon working on coming up with an exhaust system. Don't have the $$ right now to take it somewhere and have a custom exhaust put on so I grabbed a few prebent elbows from Oreillys and fired up my ancient Lincoln wire welder. This has the swept back rams horns from the '67 283 I put in it. Dodged the starter, oil filter cannister, torsion bars, squeezed through the center hump in the crossmember, dodged back out to go between the front of the trailing arms and the center of the x frame. Had to dig through my parts stash to come up with a usable heat riser. I believe the hard part is done now...
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2013
Location: central California
Posts: 2,738
|
Re: '60 Exhaust
Way to go. I built my own exhaust too using a Summit DIY kit and I now get why the pros charge a premium. I'm such a poor welder that I had to fill the pipes up with water and mark the leaks with a wax marker and keep repeating it 'till I got 'em all. I do like it though and I'm proud to say that I did it all by myself. All the way out the back even.
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: '60 Exhaust
Nice job looks good too!
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
![]() |
![]() |
![]() |
Bookmarks |
|
|