Free behind the dash wiring harness and headlight harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wcstory** · 10-03-2020, 12:11 PM

I hate throwing away something I know is useable..... These came out for an 1989 GMC R3500 (square body) I scrapped. A friend of a friend wanted them for him. That was a few years ago....

Free - you pay for a USPS flat rate large box.

**kwmech** · 10-04-2020, 12:05 AM

How 'intact' is the harness? hacked up at al...l or was it unplugged and salvaged correctly? if so I'd like a stab at it to Nor Cal. I'm also looking for the grounding metal spider that is/was attached to the inside of the left A pillar

**wcstory** · 10-04-2020, 01:51 PM

It's good. It was removed with the intention of reusing. There are a couple spliced/taps on the radio part.

**kwmech** · 10-05-2020, 10:45 AM

This everything behind the dash including computer

**wcstory** · 10-05-2020, 07:44 PM

No computer. I don't recall it having an ECM. The whole Engine harness went with the engine.

**kwmech** · 10-05-2020, 08:52 PM

Pass, sorry

44th Miss Inf · 10-05-2020, 09:34 PM

The TBI harness is basically stand alone.

I’ll try to remember to get a picture of an extra I have and post

jetmech85 · 10-06-2020, 10:45 PM

I can use those harnesses. PM me with your Paypal info.

LT7A · 10-10-2020, 10:31 PM

I assume you guys closed the loop on this? I don't need-need it but there's no use it getting tossed.

jetmech85 · 10-12-2020, 08:34 PM

Payment sent, thank you.

**wcstory** · 10-15-2020, 09:27 AM

That went out this morning, I missed the Post Office by 3 minutes yesterday....story of my life

jetmech85 · 10-15-2020, 12:33 PM

Thanks again, I always need wires to fix a harness. It usually take two or three harnesses to make a good one. I will put it to good use.

**wcstory** · 10-15-2020, 12:47 PM

Quote:

Originally Posted by jetmech85

Thanks again, I always need wires to fix a harness. It usually take two or three harnesses to make a good one. I will put it to good use.

That's what I hoped when I put it up. Too many times I've wanted a specific connector and the aftermarket stuff was never quite the same.

10-03-2020, 12:11 PM	#1
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Sold - Free behind the dash wiring harness and headlight harness I hate throwing away something I know is useable..... These came out for an 1989 GMC R3500 (square body) I scrapped. A friend of a friend wanted them for him. That was a few years ago.... Free - you pay for a USPS flat rate large box. Attached Images __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos Last edited by wcstory; 10-30-2020 at 09:02 AM. Reason: I marked it Sold / Claimed

10-04-2020, 12:05 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Free behind the dash wiring harness and headlight harness How 'intact' is the harness? hacked up at al...l or was it unplugged and salvaged correctly? if so I'd like a stab at it to Nor Cal. I'm also looking for the grounding metal spider that is/was attached to the inside of the left A pillar

10-04-2020, 01:51 PM	#3
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: Free behind the dash wiring harness and headlight harness It's good. It was removed with the intention of reusing. There are a couple spliced/taps on the radio part. __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

10-05-2020, 10:45 AM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Free behind the dash wiring harness and headlight harness This everything behind the dash including computer

10-05-2020, 07:44 PM	#5
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: Free behind the dash wiring harness and headlight harness No computer. I don't recall it having an ECM. The whole Engine harness went with the engine. Attached Images __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

10-05-2020, 08:52 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Free behind the dash wiring harness and headlight harness Pass, sorry

10-05-2020, 09:34 PM	#7
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 672	Re: Free behind the dash wiring harness and headlight harness The TBI harness is basically stand alone. I’ll try to remember to get a picture of an extra I have and post

10-06-2020, 10:45 PM	#8
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: Free behind the dash wiring harness and headlight harness I can use those harnesses. PM me with your Paypal info.

10-10-2020, 10:31 PM	#9
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,623	Re: Free behind the dash wiring harness and headlight harness I assume you guys closed the loop on this? I don't need-need it but there's no use it getting tossed.

10-12-2020, 08:34 PM	#10
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: Free behind the dash wiring harness and headlight harness Payment sent, thank you.

10-15-2020, 09:27 AM	#11
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: Free behind the dash wiring harness and headlight harness That went out this morning, I missed the Post Office by 3 minutes yesterday....story of my life __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

10-15-2020, 12:33 PM	#12
jetmech85 Registered User Join Date: Sep 2014 Location: Texas Posts: 215	Re: Free behind the dash wiring harness and headlight harness Thanks again, I always need wires to fix a harness. It usually take two or three harnesses to make a good one. I will put it to good use.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.