The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-15-2020, 10:21 PM   #1
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
PCV with turbo setup HELP

Thanks in advance guys, i have a freshly rebuilt 6.0 LS mated to a T56 in my 71 Cheyenne. Problem is that after driving it for a couple of minutes i start seeing smoke (bluish black) i assume oil, start coming from the exhaust. Im running a 78 mm turbo and noticed today that the turbo was leaking from both sides of the turbines. From what ive read im having excessive blow by or incorrectly set up pcv. What are some ways to set this up correctly or any ideas?
My current setup is : Drivers side valve cover (with pcv) hose to top of Catch can (non vented). Then from catch can to intake manifold close to throttle body.

Passengers side valve cover only has one opening and that is capped off.

My piston rings were gapped 26 top ring and second ring at 28.
Thanks again guys
Buickwc67 is offline   Reply With Quote
Old 12-15-2020, 10:31 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,734
Re: PCV with turbo setup HELP

You need filtered air in to the motor.
Put a breather where the cap is on the passenger side cover.

You might also need an adjustable pcv like this.



http://mewagner.com/?p=444
geezer#99 is offline   Reply With Quote
Old 12-16-2020, 06:32 PM   #3
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: PCV with turbo setup HELP

Quote:
Originally Posted by geezer#99 View Post
You need filtered air in to the motor.
Put a breather where the cap is on the passenger side cover.

You might also need an adjustable pcv like this.



http://mewagner.com/?p=444
I have mine like this and even using this fancy adjustable PCV.
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 12-16-2020, 12:03 AM   #4
tj1970cst
Registered User
 
Join Date: Mar 2019
Location: Arlington, TN
Posts: 170
Re: PCV with turbo setup HELP

Geezer is right. It has to have somewhere to bring in fresh air.
tj1970cst is offline   Reply With Quote
Old 12-16-2020, 03:59 AM   #5
SkidmoreGarage
Registered User
 
Join Date: Mar 2020
Location: Portland, OR
Posts: 335
Re: PCV with turbo setup HELP

If you are leaking through your turbo seals, especially into the exhaust, on a new turbo install, check your oil feed restrictor size and the oil drain is big enough and free of kinks.

If oil is building up in the turbo, it will push through the seals and into the exhaust.

I may be reading your post wrong, but I don't see any obvious relation between your problem and the pcv/catch can system. If you were getting oil though a pcv system in the amount required to cause the truck to burn oil out the exhaust, you would see a puddle in your intercooler/piping. This is unlikely.
SkidmoreGarage is offline   Reply With Quote
Old 12-16-2020, 11:20 AM   #6
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
Re: PCV with turbo setup HELP

This is a very good read: http://67-72chevytrucks.com/vboard/s...d.php?t=771227

There is some info concerning oil feed/return restrictions as well as PCV plumbing....
Attached Images
 
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 12-16-2020, 05:29 PM   #7
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Nice! This is exactly how I have my system set up with the exception of the hose (clean side) going to turbo filter. Would having that port blocked off cause oil to leak out of my turbo?
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 06:28 PM   #8
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: PCV with turbo setup HELP

Quote:
Originally Posted by Buickwc67 View Post
Nice! This is exactly how I have my system set up with the exception of the hose (clean side) going to turbo filter. Would having that port blocked off cause oil to leak out of my turbo?
you need to get fresh air from somewhere. So depending on what you mean by blocked off, if you just have the hose going to atmosphere with a filter then you should be ok if you don't have anyplace for the engine to get air that wont work. Hope I said that correct and understandable.
If I remember correctly I have mine like above but I am just pulling the air without it connected to the filter system. I will assume the way it is shown above it will create a slight vacuum under acceleration thru that hose as the air is drawn over the intake port.
Clear as mud...?
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 12-16-2020, 05:33 PM   #9
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Quote:
Originally Posted by SCOTI View Post
This is a very good read: http://67-72chevytrucks.com/vboard/s...d.php?t=771227

There is some info concerning oil feed/return restrictions as well as PCV plumbing....
Nice! This is exactly how I have my system set up with the exception of the hose (clean side) going to turbo filter. Would having that port blocked off cause oil to leak out of my turbo?
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 11:49 AM   #10
layinrocker65
Registered User
 
layinrocker65's Avatar
 
Join Date: Jun 2005
Location: California
Posts: 521
Re: PCV with turbo setup HELP

Quote:
Originally Posted by SkidmoreGarage View Post
If you are leaking through your turbo seals, especially into the exhaust, on a new turbo install, check your oil feed restrictor size and the oil drain is big enough and free of kinks.

If oil is building up in the turbo, it will push through the seals and into the exhaust.

I may be reading your post wrong, but I don't see any obvious relation between your problem and the pcv/catch can system. If you were getting oil though a pcv system in the amount required to cause the truck to burn oil out the exhaust, you would see a puddle in your intercooler/piping. This is unlikely.
I agree with this.
__________________
‘53 GMC COE stock
‘53 Chevy 3100 LSA/TR6060 http://67-72chevytrucks.com/vboard/s....php?t=805949‘
'70 Chevy C10 LWB 350/sm465
‘74 Chevy C10 SWB 5.3/4L80e, Vintage Air, Dakota Digital, US Mags
layinrocker65 is offline   Reply With Quote
Old 12-16-2020, 05:32 PM   #11
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Quote:
Originally Posted by SkidmoreGarage View Post
If you are leaking through your turbo seals, especially into the exhaust, on a new turbo install, check your oil feed restrictor size and the oil drain is big enough and free of kinks.

If oil is building up in the turbo, it will push through the seals and into the exhaust.

I may be reading your post wrong, but I don't see any obvious relation between your problem and the pcv/catch can system. If you were getting oil though a pcv system in the amount required to cause the truck to burn oil out the exhaust, you would see a puddle in your intercooler/piping. This is unlikely.
I have checked for any kinks in the drain side but its a pretty big hose to kink. Nevertheless Its not kinked up. As far as checking my oil feed restriction.... how would i do that? or what would I look for? Thanks!
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 12:35 PM   #12
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: PCV with turbo setup HELP

one other thing to watch when pcv are concerned is the placement of the MAF if you are still using that. You don't want to pull in un-metered air if using the MAF. I removed mine and went SD so it doesn't have the same affect.
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 12-16-2020, 08:02 PM   #13
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

UPDATE: So i opened the breather i had plugged up on passengers side valve cover and left it open (for now before i connect it to the turbos air filter). Took it for a drive and did not produce boost. After 15 minutes i pulled over and checked under the hood. I found oil slightly sprayed on passengers side (the side i left open for tsting purposes). so i said to myself..."self, this is ok since it will be consumed back into the air side of the turbo." So i went for another drive and drove it more aggressive, maybe 1 or 2 pounds of boost if that. As soon as i did that i saw all that blueish black smoke again shoot from my exhaust so i drove it back. When i came to check it out I saw actual oil sprayed all over my radiator and suspension. Right where the breather tube is was a nice big pool of fresh oil so it literally squirted out! It all shot out from the breather side i left open on the passengers side valve cover. I also noticed a little pool of oil on the lip of the turbo and even inside of the blow off valve. So...... Do i have two problems? Any advice is greatly appreciated fellas.

Last edited by Buickwc67; 12-16-2020 at 08:12 PM.
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 08:30 PM   #14
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,734
Re: PCV with turbo setup HELP

You got your air flow wrong. The breather is air in. Don’t matter how you hook it up. Stand alone or pulling air from the turbo inlet. It’s still air in to the motor.
Your main problem is your rings aren’t seating.
geezer#99 is offline   Reply With Quote
Old 12-16-2020, 08:55 PM   #15
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Quote:
Originally Posted by geezer#99 View Post
You got your air flow wrong. The breather is air in. Don’t matter how you hook it up. Stand alone or pulling air from the turbo inlet. It’s still air in to the motor.
Your main problem is your rings aren’t seating.
Well the engine has about 200 miles. The first couple of miles were aggressive as stated in the instructions from DSS pistons. Is there any way to set them in now or any additives?
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 08:59 PM   #16
RichardJ
Registered User
 
Join Date: Apr 2010
Location: So Cal
Posts: 1,468
Re: PCV with turbo setup HELP

Manifold vacuum is highest at idle and cruise. This puts negative pressure in the crankcase. I.E. air IN.
At WOT, manifold vacuum is very low or near non-existent. At the same, WOT produces maximum crankcase blow-by pressure. I.E. air out.

While this is going on, the turbo is dumping a lot of oil into the same rocker box and they're both trying to get out.

Valve cover breather or Tube to the air cleaner, this is always a two direction path for a PCV System, depending on engine load, turbo or not
__________________
'67 GMC 2500, 292, 4spd, AC
RichardJ is offline   Reply With Quote
Old 12-16-2020, 09:22 PM   #17
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Understood. so its a two way street in the sense. So why does so much oil shootout when i get aggressive on it? Excuse my ignorance. This is my fisrt turbo and have never dealt with this issue before. What do you think i should do?
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 09:23 PM   #18
Buickwc67
Registered User
 
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
Re: PCV with turbo setup HELP

Quote:
Originally Posted by RichardJ View Post
Manifold vacuum is highest at idle and cruise. This puts negative pressure in the crankcase. I.E. air IN.
At WOT, manifold vacuum is very low or near non-existent. At the same, WOT produces maximum crankcase blow-by pressure. I.E. air out.

While this is going on, the turbo is dumping a lot of oil into the same rocker box and they're both trying to get out.

Valve cover breather or Tube to the air cleaner, this is always a two direction path for a PCV System, depending on engine load, turbo or not
Understood. so its a two way street in the sense. So why does so much oil shootout when i get aggressive on it? Excuse my ignorance. This is my fisrt turbo and have never dealt with this issue before. What do you think i should do?
Buickwc67 is offline   Reply With Quote
Old 12-16-2020, 09:24 PM   #19
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,734
Re: PCV with turbo setup HELP

Does a baffle in the valve cover help with this reverse flow?
I would think so.
Shouldn’t see any oil splatter under normal cruise.
Maybe a leak down test is needed.

Check for a baffle in your valve cover.
geezer#99 is offline   Reply With Quote
Reply

Bookmarks

Tags
6.0, pcv valve, turbo


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com