Power Window Motor and Regulator Replacement Recommendations

[tucsonjwt]

My left power window motor is broken again. I went with DIY motor attachment the last time and used my original regulator. AC Delco now sells the motor and regulator as one unit (P/N A11392) but they are out of stock everywhere - except JC Whitney on ebay for about $134. Aftermarkets seem to go for about $60.

Since most of the Delco parts I have purchased recently were made in China, should I buy the aftermarket assembly for about $60? The last motor I got from ACD had a loose connection internally so that was a waste of money.

What have you guys used for a replacement motor/regulator? I really don't want to go through the vice grip/drill out and screw process again. My long arms get really cut up when fishing inside those small door openings, so I want to make this as easy as possible.

My existing regulator plastic guide wheels are barely attached now, so a new regulator with nice new plastic wheels would be a good idea if the regulator actually lined up correctly with my window and door.

Thanks.

[Loco83]

I replaced both doors with LMC parts 10 yrs ago and they still work as advertised.

[48cj2a]

I have a pair of GM OEM take out regulators and motors from a 88 K5.

Make a reasonable offer.

http://48cj2a.com/images/forsale/202...regulators.jpg