WA Under hood stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 02-07-2021, 04:01 AM

Cleaning out the shop, here’s some stuff we’ve had for a while. Prices plus shipping.

Fans $20 each
6 cyl fan and shroud $20
Fan extensions $8 each
292? balancer $25
Power steering pump (works) with bracket $50 SOLD
Power steering half bracket $15
Alternator bracket has been milled out wider than factory for an experiment. With arm SOLD
4 speed starter, pulled from running truck. $20
Power brake booster brackets $50
Powder coated orange pulley (actually for a car) $25
Single balancer pulley $10
Double groove balancer pulley $10
Throttle linkage powder coated black with clips $15 each
6 cyl engine mount towers powder coated semi gloss black $60
V8 towers $45 SOLD
“Rayco” AC compressor? bracket $15

**chev-obsession** · 02-07-2021, 04:05 AM

More pics

WETOWM · 02-07-2021, 10:05 AM

How much just for the alt ajustment arm

**chev-obsession** · 02-07-2021, 02:04 PM

Quote:

Originally Posted by WETOWM

How much just for the alt ajustment arm

$10 plus shipping

Willys_MB · 02-07-2021, 11:58 AM

Can you please share some better pictures of the power steering pump/bracket?

**chev-obsession** · 02-07-2021, 02:19 PM

Quote:

Originally Posted by Willys_MB

Can you please share some better pictures of the power steering pump/bracket?

Here you go. I failed to mention the pressure fitting is gone from the pump.

WETOWM · 02-07-2021, 02:48 PM

Ok can you get me a shipping cost to missouri 63125

**chev-obsession** · 02-07-2021, 06:33 PM

Quote:

Originally Posted by WETOWM

Ok can you get me a shipping cost to missouri 63125

$10 for shipping, $10 on the arm.... $20 shipped

Willys_MB · 02-07-2021, 03:29 PM

Quote:

Originally Posted by chev-obsession

Here you go. I failed to mention the pressure fitting is gone from the pump.

Sorry for my ignorance, but is this the style that mounts on the front-most bolt of the driver side exhaust manifold? I have aftermarket 4x4 manifolds on and I’m not sure if it would work for my application

**chev-obsession** · 02-07-2021, 06:23 PM

Quote:

Originally Posted by Willys_MB

Sorry for my ignorance, but is this the style that mounts on the front-most bolt of the driver side exhaust manifold? I have aftermarket 4x4 manifolds on and I’m not sure if it would work for my application

This came from a 72 2wd suburban. It mounts to the front of the block with 2 bolts and one bolt by the rubber engine mount

Willys_MB · 02-07-2021, 07:13 PM

Quote:

Originally Posted by chev-obsession

This came from a 72 2wd suburban. It mounts to the front of the block with 2 bolts and one bolt by the rubber engine mount

Ok, I’ll take it then! Shipping to 83646. Thank you!

projectking · 02-07-2021, 03:10 PM

I’ll take the 292 balancer

**chev-obsession** · 02-07-2021, 06:35 PM

Quote:

Originally Posted by projectking

I’ll take the 292 balancer

I believe it’s a 292 balancer. You might do some homework

projectking · 02-07-2021, 03:12 PM

Orange pulley too depending on some measurements

**chev-obsession** · 02-07-2021, 06:24 PM

Quote:

Originally Posted by projectking

Orange pulley too depending on some measurements

Which measurements would you like

projectking · 02-07-2021, 08:23 PM

Quote:

Originally Posted by chev-obsession

Which measurements would you like

Overall diameter, I believe it’s what I need for the 292

**chev-obsession** · 02-07-2021, 08:51 PM

Here’s all the measurements from the double groove pulley. I believe it was intended for a 327 impala/corvette with AC. The balancer looks like a 292 balancer to me but I can’t find any part numbers on it. Hopefully someone can chime in. I can get measurements later tonight

projectking · 02-07-2021, 09:39 PM

Thank you, It’s a shallow groove and won’t work

projectking · 02-09-2021, 08:47 PM

Shipping for the balancer?

**chev-obsession** · 02-09-2021, 11:20 PM

Quote:

Originally Posted by projectking

Shipping for the balancer?

Shipping will be $13. If that’s cool send me a pm for payment info

sanddunecoon · 02-10-2021, 03:51 PM

if Willys MB changes his mind let me know on the power steering bracket.

Willys_MB · 02-10-2021, 03:55 PM

Hey I just had a thought, have you shipped the pump/brackets yet? I am also interested in that PS half bracket

**chev-obsession** · 02-10-2021, 05:10 PM

Quote:

Originally Posted by Willys_MB

Hey I just had a thought, have you shipped the pump/brackets yet? I am also interested in that PS half bracket

Yes I have shipped the pump setup. Returned your pm.

**chev-obsession** · 02-11-2021, 02:01 AM

Pics for Willys MB

**Grumpy old man** · 02-11-2021, 10:31 PM

PM sent on small block mounts .

02-07-2021, 04:01 AM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Under hood stuff Cleaning out the shop, here’s some stuff we’ve had for a while. Prices plus shipping. Fans $20 each 6 cyl fan and shroud $20 Fan extensions $8 each 292? balancer $25 Power steering pump (works) with bracket $50 SOLD Power steering half bracket $15 Alternator bracket has been milled out wider than factory for an experiment. With arm SOLD 4 speed starter, pulled from running truck. $20 Power brake booster brackets $50 Powder coated orange pulley (actually for a car) $25 Single balancer pulley $10 Double groove balancer pulley $10 Throttle linkage powder coated black with clips $15 each 6 cyl engine mount towers powder coated semi gloss black $60 V8 towers $45 SOLD “Rayco” AC compressor? bracket $15 Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb Last edited by chev-obsession; 02-13-2021 at 11:57 PM.

02-07-2021, 04:05 AM	#2
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Re: Under hood stuff More pics Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb

02-07-2021, 10:05 AM	#3
WETOWM Registered User Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Re: Under hood stuff How much just for the alt ajustment arm

02-07-2021, 11:58 AM	#5
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: Under hood stuff Can you please share some better pictures of the power steering pump/bracket? __________________ 1968 GMC C2500 Long Bed Fleetside

02-07-2021, 02:48 PM	#7
WETOWM Registered User Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Re: Under hood stuff Ok can you get me a shipping cost to missouri 63125

02-07-2021, 03:10 PM	#12
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Under hood stuff I’ll take the 292 balancer __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

02-07-2021, 03:12 PM	#14
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Under hood stuff Orange pulley too depending on some measurements __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

02-07-2021, 08:51 PM	#17
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Re: Under hood stuff Here’s all the measurements from the double groove pulley. I believe it was intended for a 327 impala/corvette with AC. The balancer looks like a 292 balancer to me but I can’t find any part numbers on it. Hopefully someone can chime in. I can get measurements later tonight Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb

02-07-2021, 09:39 PM	#18
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Under hood stuff Thank you, It’s a shallow groove and won’t work __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback Last edited by projectking; 02-07-2021 at 09:54 PM.

02-09-2021, 08:47 PM	#19
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Under hood stuff Shipping for the balancer? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

02-10-2021, 03:51 PM	#21
sanddunecoon Registered User Join Date: Apr 2019 Location: jefferson Posts: 40	Re: Under hood stuff if Willys MB changes his mind let me know on the power steering bracket.

02-10-2021, 03:55 PM	#22
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: Under hood stuff Hey I just had a thought, have you shipped the pump/brackets yet? I am also interested in that PS half bracket __________________ 1968 GMC C2500 Long Bed Fleetside

02-11-2021, 02:01 AM	#24
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Re: Under hood stuff Pics for Willys MB Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb

02-11-2021, 10:31 PM	#25
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Under hood stuff PM sent on small block mounts . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.