F/S NOS & Used NP205 T/C Shift Lever Linkage Rods & Shift Levers

[Classic Bowties]

We have a few NP205 transfer case shift lever to shift rail linkage rods pulled out ready to ship. If interested, online funds can be sent via Zelle and CashApp, Credit Card over the phone or Check/Money Order by mail. Thanks, Mel

#1/GM NOS NP205 shift link/rod. $100. + $8. for CONUS shipment. ***Sold/Shipped***

#2/OE Used NP205 shift links/rods, Qty. 3 available. $45. ea + $8. for CONUS shipment. ***Qty. 2 Sold/Shipped***

**10/17/22*** Per a members request, we have added an early (Pre 72) style GM NOS t/c shift lever shoulder bolt with the 7/16"-14 NC thread in below thread post #49. ***Sold/Shipped*** We have added a second GM NOS t/c shift lever pivot bolt in post #54.

We also have a matched K/4wd 4 speed-NP205 shift lever setup from a 72 blazer available in the below linked F/S thread. ***Sold/Picked Up***

https://67-72chevytrucks.com/vboard/...d.php?t=795681
.

[AZ Chev]

Is there a shift linkage and shifter correct for a 69 4 speed? If so, how much?

[Classic Bowties]

Originally Posted by AZ Chev

Is there a shift linkage and shifter correct for a 69 4 speed? If so, how much?

The above pictured 72 4wd 4 speed trans shift lever would be the same but the transfer case shift lever was specific to 69-70 manual or 69-70 auto trans and was centered in trans tunnel cover while the 71-72 style transfer case shift levers fit both transmissions and were offset to the right hand side of tunnel cover. See our below saved file pics showing the difference in bends on the early vs later NP205 t/c shift levers, it may be easiest to look at your 69 4wd to compare and note differences also. Mel
.

[30772]

Hello,
I am interested in the following: "71-72 style NP205 transfer case shift levers for $100. + $22. for shipping in CONUS". Do you have one for automatic transmission/NP 205 configuration?
Thanks
30772

[Classic Bowties]

Originally Posted by 30772

Hello,
I am interested in the following: "71-72 style NP205 transfer case shift levers for $100. + $22. for shipping in CONUS". Do you have one for automatic transmission/NP 205 configuration?
Thanks
30772

Yes, the 71-72 NP205 transfer case shift lever fits both manual and auto transmissions, was same lever for both models, will get you some pictures this morning. Mel

[30772]

Originally Posted by Classic Bowties

Yes, the 71-72 NP205 transfer case shift lever fits both manual and auto transmissions, was same lever for both models, will get you some pictures this morning. Mel

sounds good, thank you. the one i currently have is for 73 & up - wanting to correct that...

[Classic Bowties]

Originally Posted by 30772

Hello,
I am interested in the following: "71-72 style NP205 transfer case shift levers for $100. + $22. for shipping in CONUS".

Here is the 1971-72 NP205 transfer case shift lever, this one is in real clean bolt in ready to use condition. If it's a go, let us know your preferred method of sending payment (options listed in top post) and we'll get that info returned to you. Thanks, Mel
.

[30772]

Originally Posted by Classic Bowties

Here is the 1971-72 NP205 transfer case shift lever, this one is in real clean bolt in ready to use condition. If it's a go, let us know your preferred method of sending payment (options listed in top post) and we'll get that info returned to you. Thanks, Mel
.

Yes, looks like it'd be worth taking a chance on. Paypal is what I'd typically use.
Thank you -

[Classic Bowties]

Originally Posted by 30772

Yes, looks like it'd be worth taking a chance on. Paypal is what I'd typically use.
Thank you -

Okay, the shipping cost via USPS Priority Lg Box in CONUS is $21.90, our info for sending funds has been returned on 03/20, please confirm your shipping address and we'll get the package ready to go for Sundays shipments. Thanks, Mel

[30772]

Originally Posted by Classic Bowties

Okay, the shipping cost via USPS Priority Lg Box in CONUS is $21.90, our info for sending funds has been returned on 03/20, please confirm your shipping address and we'll get the package ready to go for Sundays shipments. Thanks, Mel

Paypal submitted on 3/21/21.
Shipping address forwarded in PM as well.
thank you

[seik5]

I want the NP205 chrome shift lever, for the super chyenne, the boot and mounting ring, and the shoulder bolt assembley. How much for all, shipped? I will get you a pay pal transfer

[Classic Bowties]

Originally Posted by seik5

I want the NP205 chrome shift lever, for the super chyenne, the boot and mounting ring, and the shoulder bolt assembley. How much for all, shipped? I will get you a pay pal transfer

Okay, you got items #1, #3 & #4. All of the pricing was listed in above post #14 along with two different combined shipping options, confirm preferred ship method and we'll get a total and info for sending of funds returned. Thank you, Mel

[seik5]

Fed-ex works good in my local. Pm me total, and PayPal account. I will send funds your way!

[Classic Bowties]

Originally Posted by seik5

Fed-ex works good in my local. Pm me total, and PayPal account. I will send funds your way!

Your combined parts total and info for sending of funds via paypal has been returned. Thank you, Mel

[Classic Bowties]

Originally Posted by seik5

I want the NP205 chrome shift lever, for the super chyenne, the boot and mounting ring, and the shoulder bolt assembley. How much for all, shipped? I will get you a pay pal transfer

The 72 NP205 transfer case parts are headed your way, the package went out via FedEx ground on Sat. 08/21 and the expected delivery day is this Wed. 08/25. Thanks again for the order and let me know if we can help with any other 67-72 parts needs, Mel

[seik5]

You guys rock! Everything arrived in great shape. Cant wait to get it installed. THANKS AGAIN!!!

[72ironmike]

Mel, If #2 in post #14 is available I will take it. Mike

[Classic Bowties]

Originally Posted by 72ironmike

Mel, If #2 in post #14 is available I will take it. Mike

Hi Mike, yes we can get that above pictured 72 K/5 NP205 painted shift lever (#2) to you in KS. for $22.65 via USPS priority or FedEx ground your choice, our info for sending funds via paypal has been returned Wed. 11/10. Thanks, Mel

[LostMy65]

If you ever come across a driveshaft the length for a longbed c10 with a TH350, I'd be interested.

[Classic Bowties]

Originally Posted by LostMy65

If you ever come across a driveshaft the length for a longbed c10 with a TH350, I'd be interested.

We are parting a 72 1/2 ton coil truck and currently have the drive shaft pulled out and sitting on the shop floor, we have added some pics to the below linked f/s thread and given you first option, have a look and confirm or pass interest in thread. Thank you for the inquiry, Mel

http://67-72chevytrucks.com/vboard/s...45#post8994245
.

[Classic Bowties]

Bringing the #2/OE used NP205 shift link rod and the second added GM NOS t/c shift lever bolt pictured in above post #54 back up ttt...

[jnavar]

Hello, I was wondering if you have a shift lever and bolt. I have a 1969 GMC K20 that I converted from manual to an automatic.
Thank you

[yote1234]

i will take this bolt Mel. the one in pic in post 54 i thank you sir, dave

[Dieselwrencher]

Mel, do you have any 71 or 72 4x4 4 speed shift handles? I'd prefer chrome but painted will work as well. Thanks Ryan.

[Classic Bowties]

Originally Posted by Dieselwrencher

Mel, do you have any 71 or 72 4x4 4 speed shift handles? I'd prefer chrome but painted will work as well. Thanks Ryan.

Hey Ryan, we only have the one painted K 4spd shift lever pictured/linked in the previous post right above yours. We will split the pair up if you don't need both levers, Mel