292 6 cylinder questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue_71 · 12-20-2003, 11:58 PM

how does a 292 mount in a 4x4? the stock V8 mounts in a K truck are in the I6 position, but the crossmember under it just goes from back mount on one side to the other, so how does the stagered mount of a 292 work with that? about how much torque would one of these make with the head ported some, 4 barrel intake and 600 cfm carb, and header? are they internally or externally balanced?

oldsub86 · 12-21-2003, 12:59 AM

Haynes manual says the 292 makes 170 Hp and 275 lbft of torque. Not too bad as it also says the 350 only makes 320 lbft of torque. That would be stock of course so changes might improve the power somewhat.

1969 GMC · 12-21-2003, 04:43 AM

ask board member stelth2002 ( i think thats his name) he has a truck with a hotrod 292.

Blue_71 · 12-21-2003, 08:21 PM

anyone know how to mount one of these things in a 4x4?

**john** · 12-21-2003, 09:03 PM

I think 292's have their own towers, for the offset mounts.

CPNEJR · 12-21-2003, 10:04 PM

It depends on what year because my 67 sales brochure says the made 170 hph and 275 ft-lbs of tourque and thats stock so I'm not sure

CPNEJR · 12-21-2003, 10:09 PM

It also says that it's compresion ratio is 8.0 to 1 Gross hp @rpm is 170@4000 net hp @ rpm is 153@3600 Gross torque, ft-lbs. @ rpm 275@1600 and net torque, ft-lbs. @ rpm is 255@2400 forgot to put that in earlier sorry

Blue_71 · 12-21-2003, 10:17 PM

dont worry about it, i forget stuff and have to repost all the time

do you or jeff know what all i need to put that in my truck?

stelth2002 · 12-21-2003, 10:37 PM

Correct, they have offset motor mounts, the only one like it. The 250 does use the same passenger side tower. To mount it in a 4x4 i think you just use the same drivers side mount and you have to use a factory style mount on the passenger side. Im no 4x4 person in this era, but if you got a set of 2wd mounts i think they would mount in a 4x4. As far as torque, i think its been pretty well showed above. any questions you can mail me jmartin@uidaho.edu

**Canadian694x4** · 12-21-2003, 10:58 PM

Hey Stelth2002 do you have any pics of your 292 67 ? can you post em it sounds sweet...

Blue_71 · 12-22-2003, 10:59 PM

ttt

CPNEJR · 12-22-2003, 11:10 PM

Sorry Blue_71 I don't don't but I'm not sure about my dad

I can say I don't think we have ever had a 4+4 with a 292 but we've had alot of trucks go through here

12-21-2003, 12:59 AM	#2
oldsub86 Registered User Join Date: Dec 2002 Location: Canada Posts: 695	Haynes manual says the 292 makes 170 Hp and 275 lbft of torque. Not too bad as it also says the 350 only makes 320 lbft of torque. That would be stock of course so changes might improve the power somewhat. __________________ 1968 Chevy - 292 with a powerglide

12-21-2003, 04:43 AM	#3
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	ask board member stelth2002 ( i think thats his name) he has a truck with a hotrod 292. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

12-21-2003, 09:03 PM	#5
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	I think 292's have their own towers, for the offset mounts. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

12-21-2003, 10:04 PM	#6
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	It depends on what year because my 67 sales brochure says the made 170 hph and 275 ft-lbs of tourque and thats stock so I'm not sure __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

12-21-2003, 10:09 PM	#7
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	It also says that it's compresion ratio is 8.0 to 1 Gross hp @rpm is 170@4000 net hp @ rpm is 153@3600 Gross torque, ft-lbs. @ rpm 275@1600 and net torque, ft-lbs. @ rpm is 255@2400 forgot to put that in earlier sorry __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

12-21-2003, 10:37 PM	#9
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Correct, they have offset motor mounts, the only one like it. The 250 does use the same passenger side tower. To mount it in a 4x4 i think you just use the same drivers side mount and you have to use a factory style mount on the passenger side. Im no 4x4 person in this era, but if you got a set of 2wd mounts i think they would mount in a 4x4. As far as torque, i think its been pretty well showed above. any questions you can mail me jmartin@uidaho.edu __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

12-21-2003, 10:58 PM	#10
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Hey Stelth2002 do you have any pics of your 292 67 ? can you post em it sounds sweet... __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-22-2003, 11:10 PM	#12
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Sorry Blue_71 I don't don't but I'm not sure about my dad I can say I don't think we have ever had a 4+4 with a 292 but we've had alot of trucks go through here __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.