GA parting out Cheyenne super - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**heehawracing** · 04-13-2021, 09:52 AM

rearend... 308 gear 300.00 picked up
cab... needs rockers and cab corners good roof firewall and braces 1000.00
steering column 200.00 shipped
alternator bracket 50.00 shipped

**Rich rodriguez** · 04-13-2021, 09:58 AM

I’m interested in the vent sun shades with the clips if there in good condition and brake pads for brake and emergency brake with trim and the AC vents all of them with hardware and duct, I’m also interested in door sills depending on condition. If the antenna is original AM FM I’m interested in that too

**heehawracing** · 04-13-2021, 10:28 AM

Quote:

Originally Posted by Rich rodriguez

I’m interested in the vent sun shades with the clips if there in good condition and brake pads for brake and emergency brake with trim and the AC vents all of them with hardware and duct, I’m also interested in door sills depending on condition. If the antenna is original AM FM I’m interested in that too

ill check everything out

**Rich rodriguez** · 04-13-2021, 10:28 AM

Quote:

Originally Posted by heehawracing

ill check everything out

Sounds good! Thank you

**heehawracing** · 04-13-2021, 10:48 AM

Quote:

Originally Posted by Rich rodriguez

I’m interested in the vent sun shades with the clips if there in good condition and brake pads for brake and emergency brake with trim and the AC vents all of them with hardware and duct, I’m also interested in door sills depending on condition. If the antenna is original AM FM I’m interested in that too

vents shades are no good brake pads i need on my truck door sills are rusty antenna looks aftermarket.... ac/vents all tabs are good with no cracks and with hardware 90.00 shipped

**Rich rodriguez** · 04-13-2021, 11:07 AM

Quote:

Originally Posted by heehawracing

vents shades are no good brake pads i need on my truck door sills are rusty antenna looks aftermarket.... ac/vents all tabs are good with no cracks and with hardware 90.00 shipped

Thanks for posting these, I’m going to pass on these

**Louisvillekytruck** · 04-13-2021, 11:09 AM

Vent shade clips

**heehawracing** · 04-13-2021, 11:17 AM

Quote:

Originally Posted by Louisvillekytruck

Vent shade clips

sorry i need them for my truck

**DeadheadNM** · 04-13-2021, 10:23 AM

Ashtray available? If so, cost shipped and condition (pics) please.

**heehawracing** · 04-13-2021, 10:54 AM

Quote:

Originally Posted by DeadheadNM

Ashtray available? If so, cost shipped and condition (pics) please.

ash tray good driver condition 28.00 shipped

**med.bronze** · 04-13-2021, 10:59 AM

Interested in inner fender brace on the drivers side that goes around the steering shaft. Thanks-Ryan

**heehawracing** · 04-13-2021, 11:01 AM

Quote:

Originally Posted by med.bronze

Interested in inner fender brace on the drivers side that goes around the steering shaft. Thanks-Ryan

30.00 shipped

**med.bronze** · 04-13-2021, 11:07 AM

Quote:

Originally Posted by heehawracing

30.00 shipped

I’ll take it. Thanks. Pm sent

**DeadheadNM** · 04-13-2021, 11:06 AM

Quote:

Originally Posted by heehawracing

ash tray good driver condition 28.00 shipped

Thanks for posting. Chasing one with a little better paint so will pass. Pete

**heehawracing** · 04-13-2021, 11:20 AM

Quote:

Originally Posted by DeadheadNM

Thanks for posting. Chasing one with a little better paint so will pass. Pete

better ash tray same price

**DeadheadNM** · 04-13-2021, 11:52 AM

Quote:

Originally Posted by heehawracing

better ash tray same price

I'll take it if orig paint - PM PP and I'll square up thanks. If you part the engine I might be interested in the water pump too.

**72 Super** · 04-13-2021, 10:37 AM

Are selling anything off the engine? Interested in the valve covers and air cleaner if you have it.

Thanks,
Ray

**lks dcvn** · 04-13-2021, 10:49 AM

interested in selling the door catches on the b-pillar with shims and bolts? Let me know. Thanks.

**Louisvillekytruck** · 04-13-2021, 10:58 AM

Do the vent shades have the clips I need the clips for the vent shades I bought from you or what ever holds them on

**heehawracing** · 04-13-2021, 11:00 AM

Quote:

Originally Posted by lks dcvn

interested in selling the door catches on the b-pillar with shims and bolts? Let me know. Thanks.

i have some 35.00 shipped

**heehawracing** · 04-13-2021, 10:59 AM

Quote:

Originally Posted by 72 Super

Are selling anything off the engine? Interested in the valve covers and air cleaner if you have it.

Thanks,
Ray

i will sell the air cleaner spacer stud and wing nut for 175.00 shipped

**72 Super** · 04-13-2021, 12:01 PM

Quote:

Originally Posted by heehawracing

i will sell the air cleaner spacer stud and wing nut for 175.00 shipped

Is this with the valve covers or just the air cleaner?

Thanks,
Ray

**heehawracing** · 04-13-2021, 12:14 PM

Quote:

Originally Posted by 72 Super

Is this with the valve covers or just the air cleaner?

Thanks,
Ray

just the air cleaner spacer stud and wing nut

**72 Super** · 04-14-2021, 12:04 PM

Quote:

Originally Posted by heehawracing

just the air cleaner spacer stud and wing nut

I will pass on the air cleaner. Interested in valve covers if you decide to sell.

Thanks,
Ray

54Caddy · 04-13-2021, 01:03 PM

Alternator mount and adjustment arm

04-13-2021, 09:52 AM	#1
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	parting out Cheyenne super rearend... 308 gear 300.00 picked up cab... needs rockers and cab corners good roof firewall and braces 1000.00 steering column 200.00 shipped alternator bracket 50.00 shipped Attached Images

04-13-2021, 09:58 AM	#2
Rich rodriguez Registered User Join Date: Jan 2018 Location: Stockton Ca Posts: 424	Re: parting out Cheyenne super I’m interested in the vent sun shades with the clips if there in good condition and brake pads for brake and emergency brake with trim and the AC vents all of them with hardware and duct, I’m also interested in door sills depending on condition. If the antenna is original AM FM I’m interested in that too Last edited by Rich rodriguez; 04-13-2021 at 10:14 AM.

04-13-2021, 11:09 AM	#7
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,113	Re: parting out Cheyenne super Vent shade clips

04-13-2021, 10:23 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: parting out Cheyenne super Ashtray available? If so, cost shipped and condition (pics) please. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-13-2021, 10:59 AM	#11
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: parting out Cheyenne super Interested in inner fender brace on the drivers side that goes around the steering shaft. Thanks-Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

04-13-2021, 10:37 AM	#17
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: parting out Cheyenne super Are selling anything off the engine? Interested in the valve covers and air cleaner if you have it. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-13-2021, 10:49 AM	#18
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: parting out Cheyenne super interested in selling the door catches on the b-pillar with shims and bolts? Let me know. Thanks.

04-13-2021, 10:58 AM	#19
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,113	Re: parting out Cheyenne super Do the vent shades have the clips I need the clips for the vent shades I bought from you or what ever holds them on

04-13-2021, 01:03 PM	#25
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: parting out Cheyenne super Alternator mount and adjustment arm __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.