Skokie......... let it breathe! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 12-22-2003, 08:31 PM

Here's a couple of ways to set up your breather.

In the picture below:

-collar for under air cleaner
-aftermarket air cleaner base with fitting
-valve cover push in fitting

Tx Firefighter · 12-22-2003, 08:37 PM

Here it is in place. The collar fits on top of the carb, under the air cleaner.

The yellow deal is a rubber hose.

You should be able to get the collar and valve cover fitting from someone on the part's board.

You can also connect the hose the the bottom of an aftermarket air filter that has a fitting on it.

There are other ways, but this is stock and this is how I like to do mine.

skokie · 12-22-2003, 08:45 PM

Tx. Once again thanks. BTW is that hose goingto be 3/8?

Tx Firefighter · 12-22-2003, 08:46 PM

closer to 3/4"

skokie · 12-22-2003, 08:51 PM

OK. Couldnt tell from the pic.
Time to hit the parts board.

Thanks again Tx Firefighter.

12-22-2003, 08:31 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Skokie......... let it breathe! Here's a couple of ways to set up your breather. In the picture below: -collar for under air cleaner -aftermarket air cleaner base with fitting -valve cover push in fitting __________________ I'm on the Instagram- @Gearhead_Kevin

12-22-2003, 08:37 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Here it is in place. The collar fits on top of the carb, under the air cleaner. The yellow deal is a rubber hose. You should be able to get the collar and valve cover fitting from someone on the part's board. You can also connect the hose the the bottom of an aftermarket air filter that has a fitting on it. There are other ways, but this is stock and this is how I like to do mine. __________________ I'm on the Instagram- @Gearhead_Kevin

12-22-2003, 08:46 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	closer to 3/4" __________________ I'm on the Instagram- @Gearhead_Kevin

12-22-2003, 08:45 PM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Tx. Once again thanks. BTW is that hose goingto be 3/8?

12-22-2003, 08:51 PM	#5
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	OK. Couldnt tell from the pic. Time to hit the parts board. Thanks again Tx Firefighter.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.