OR Misc Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jweb** · 06-24-2021, 12:31 AM

I just bought a few boxes of parts just to get a fender I wanted. Selling all the rest. Make offer on any parts. I also have these listed locally,

I understand these parts aren’t perfect, so I don’t expect a lot for them.
I will try my best to keep this updated

Pic 1: SOLD

Pic 2,3: 3 different mirror heads

Pic 4: blower motor, untested

Pic 5: Wiring harness, looks fairly complete

**jweb** · 06-24-2021, 12:38 AM

Pic 6: Gauge cluster

Pic 7: SOLD

Pic 8: SOLD

Pic 9: Hood latches

Pic 10: SOLD

**jweb** · 06-24-2021, 12:44 AM

Pic 11: SOLD

Pic 12: Wiper motor

Pic 13: Pedal linkage, bezels, hood latch

Pic 14: SOLD

Pic 15: SOLD

**jweb** · 06-24-2021, 12:53 AM

Pic 16: Wiper linkage

Pic 17: Turn signal housing

Pic 18: Driver’s door, rust in the bottom would need inner and outer patches. Complete with glass, hinges and all parts (except mirror arm and door panel) Local only unless you just want some parts off of it.

Pic 19: Small back window and side glass.

Pic 20: Driver’s fender, this is bowed in the center and has some damage on the lower rear. I don’t see any rust through but it would take some work to straighten. Local Only

tchevs · 06-24-2021, 08:22 AM

prices on following
ash tray, heater control, headlight buckets, horns,
bezels, and headlight rings?

**jweb** · 06-24-2021, 10:19 AM

Quote:

Originally Posted by tchevs

prices on following
ash tray, heater control, headlight buckets, horns,
bezels, and headlight rings?

Ash tray $5
Heater control $15
Headlight buckets $10 each
Horn $10
Bezels $5 each, (I have another set and I will send the best 2)
Headlight Trim pieces ( Pic 7) $10 each
Headlight retainers (Pic 8) $5 pair

Let me know if you think these are fair. I don't sell many parts.

tchevs · 06-24-2021, 12:27 PM

Quote:

Originally Posted by jweb

Ash tray $5
Heater control $15
Headlight buckets $10 each
Horn $10
Bezels $5 each, (I have another set and I will send the best 2)
Headlight Trim pieces ( Pic 7) $10 each
Headlight retainers (Pic 8) $5 pair

Let me know if you think these are fair. I don't sell many parts.

I’ll take a few items for sure. Heater control,horn, the 2 pair of headlight retainers if they are in good condition, ash tray. Pic 7 I might want all 4 pending better pictures. Let me see how many headlight buckets I need. Hopefully shipping isn’t a deal breaker. Shipping to 95012.

**jweb** · 06-24-2021, 12:56 PM

Quote:

Originally Posted by tchevs

I’ll take a few items for sure. Heater control,horn, the 2 pair of headlight retainers if they are in good condition, ash tray. Pic 7 I might want all 4 pending better pictures. Let me see how many headlight buckets I need. Hopefully shipping isn’t a deal breaker. Shipping to 95012.

I will get more photos of the headlight trim pieces when I get home. If you buy all of this and the shipping is over $20 I will cover the rest. That would $100 for all the parts including shipping if my math is correct. I didn't include the headlight buckets so those would be more, but I will still keep the shipping under $20.

tchevs · 06-24-2021, 07:53 PM

Not sure if left and right matters on headlight buckets but i do need 3 of them.
I hope those headlight retainers are in good condition so that i get them off your hands. once you figure it out, PM your payment method.

**jweb** · 06-24-2021, 11:39 PM

Quote:

Originally Posted by tchevs

Not sure if left and right matters on headlight buckets but i do need 3 of them.
I hope those headlight retainers are in good condition so that i get them off your hands. once you figure it out, PM your payment method.

Here are photos of the headlight trim pieces. You can see the grey set has notches to access the adjusters and the white ones don’t.

All of the headlight retainers are in good shape but 1 isn’t the same thickness. 3 of them are about 3/4” tall and 1 is about 1/2” tall. I don’t know which is correct for these truck LS although they should work fine.

Just let me know if you still want both sets.

tchevs · 06-25-2021, 07:54 AM

Quote:

Originally Posted by jweb

Here are photos of the headlight trim pieces. You can see the grey set has notches to access the adjusters and the white ones don’t.

All of the headlight retainers are in good shape but 1 isn’t the same thickness. 3 of them are about 3/4” tall and 1 is about 1/2” tall. I don’t know which is correct for these truck LS although they should work fine.

Just let me know if you still want both sets.

Yessir, I want them. The other retainer rings I have are like the deeper ones, not sure that smaller one will work but Ill take the chance because i need it.

**jweb** · 06-25-2021, 09:16 AM

Quote:

Originally Posted by tchevs

Yessir, I want them. The other retainer rings I have are like the deeper ones, not sure that smaller one will work but Ill take the chance because i need it.

PM sent with total cost and payment info

**pdxhall** · 06-26-2021, 06:33 PM

Are you interested in selling the mirror arm on the door? I would also be interested in the door handle if it's not pitted. Where in Oregon are you located? I'm in Portland for the next couple of weeks so I could possibly pick up. What are you asking for the door? I'm also interested in the window hardware?

**jweb** · 06-26-2021, 07:24 PM

Quote:

Originally Posted by pdxhall

Are you interested in selling the mirror arm on the door? I would also be interested in the door handle if it's not pitted. Where in Oregon are you located? I'm in Portland for the next couple of weeks so I could possibly pick up. What are you asking for the door? I'm also interested in the window hardware?

I’m keeping the mirror arm for now. I will look at the door handle when it cools down. We are having record high temps here right now. Supposed to be 115 tomorrow

**jweb** · 06-26-2021, 11:23 PM

Quote:

Originally Posted by pdxhall

Are you interested in selling the mirror arm on the door? I would also be interested in the door handle if it's not pitted. Where in Oregon are you located? I'm in Portland for the next couple of weeks so I could possibly pick up. What are you asking for the door? I'm also interested in the window hardware?

Handle is pitted pretty bad on top.
Posted via Mobile Device

**pdxhall** · 06-27-2021, 12:26 PM

Thanks for checking. What do you want for the door? I'm here in Portland now and I could pick it up. Where are you located in Oregon?

LostMy65 · 06-25-2021, 02:48 PM

I've seen aluminum bezels with those notches, but never seen painted ones with them. Interesting.

**jweb** · 06-25-2021, 02:52 PM

Quote:

Originally Posted by LostMy65

I've seen aluminum bezels with those notches, but never seen painted ones with them. Interesting.

Same here, I had to double check that they weren’t aluminum. Never seen a steel set that way either.

tchevs · 06-26-2021, 09:02 AM

Payment was sent, left you a PM with shipping address.

**jweb** · 06-26-2021, 12:33 PM

Quote:

Originally Posted by tchevs

Payment was sent, left you a PM with shipping address.

Thanks, will ship on Monday.

**jweb** · 06-28-2021, 12:47 PM

Quote:

Originally Posted by tchevs

Payment was sent, left you a PM with shipping address.

Parts shipped, pm sent with tracking

tchevs · 07-02-2021, 08:17 AM

I received my parts yesterday, thank you.

06-24-2021, 12:31 AM	#1
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,209	Misc Parts I just bought a few boxes of parts just to get a fender I wanted. Selling all the rest. Make offer on any parts. I also have these listed locally, I understand these parts aren’t perfect, so I don’t expect a lot for them. I will try my best to keep this updated Pic 1: SOLD Pic 2,3: 3 different mirror heads Pic 4: blower motor, untested Pic 5: Wiring harness, looks fairly complete Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt Last edited by jweb; 07-13-2021 at 10:10 AM.

06-24-2021, 12:38 AM	#2
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,209	Re: Misc Parts Pic 6: Gauge cluster Pic 7: SOLD Pic 8: SOLD Pic 9: Hood latches Pic 10: SOLD Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt Last edited by jweb; 06-25-2021 at 09:19 AM.

06-24-2021, 12:44 AM	#3
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,209	Re: Misc Parts Pic 11: SOLD Pic 12: Wiper motor Pic 13: Pedal linkage, bezels, hood latch Pic 14: SOLD Pic 15: SOLD Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt Last edited by jweb; 06-25-2021 at 09:20 AM.

06-24-2021, 12:53 AM	#4
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,209	Re: Misc Parts Pic 16: Wiper linkage Pic 17: Turn signal housing Pic 18: Driver’s door, rust in the bottom would need inner and outer patches. Complete with glass, hinges and all parts (except mirror arm and door panel) Local only unless you just want some parts off of it. Pic 19: Small back window and side glass. Pic 20: Driver’s fender, this is bowed in the center and has some damage on the lower rear. I don’t see any rust through but it would take some work to straighten. Local Only Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt

06-24-2021, 08:22 AM	#5
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 507	Re: Misc Parts prices on following ash tray, heater control, headlight buckets, horns, bezels, and headlight rings?

06-24-2021, 07:53 PM	#9
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 507	Re: Misc Parts Not sure if left and right matters on headlight buckets but i do need 3 of them. I hope those headlight retainers are in good condition so that i get them off your hands. once you figure it out, PM your payment method.

06-26-2021, 06:33 PM	#13
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,085	Re: Misc Parts Are you interested in selling the mirror arm on the door? I would also be interested in the door handle if it's not pitted. Where in Oregon are you located? I'm in Portland for the next couple of weeks so I could possibly pick up. What are you asking for the door? I'm also interested in the window hardware? __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. Last edited by pdxhall; 06-26-2021 at 06:42 PM.

06-27-2021, 12:26 PM	#16
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,085	Re: Misc Parts Thanks for checking. What do you want for the door? I'm here in Portland now and I could pick it up. Where are you located in Oregon? __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-25-2021, 02:48 PM	#17
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Misc Parts I've seen aluminum bezels with those notches, but never seen painted ones with them. Interesting. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-26-2021, 09:02 AM	#19
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 507	Re: Misc Parts Payment was sent, left you a PM with shipping address.

07-02-2021, 08:17 AM	#22
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 507	Re: Misc Parts I received my parts yesterday, thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.