|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-28-2021, 02:16 PM
|
#1 |
|
Senior Member
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,597
|
Your C10 power steering box -- Lock to lock to turns?
On your power steering box, how many turns does it have lock-to-lock when installed on your C10 truck? My 69 C10 box itself has 4-1/4 turns when sitting on the bench. However, when connected to the steering linkage it has only 3-1/2 turns because my 85 spindles' "stops" hit the lower A-arms. I'm just curious if yours has the full 4-1/4 with stock spindles.
My truck has been this way for around 25 years since I installed the 85 spindles, but I just now realized it when installing an AGR Steerco box. 
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
|
|
06-30-2021, 10:26 AM
|
#2 |
|
Senior Member
Join Date: Jul 2000
Location: North Texas
Posts: 3,597
|
Re: Your C10 power steering box -- Lock to lock to turns?
Bueller? Bueller?
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
|
|
|
06-30-2021, 01:31 PM
|
#3 |
|
Registered User
Join Date: Jan 2007
Location: Puyallup, WA
Posts: 1,662
|
Re: Your C10 power steering box -- Lock to lock to turns?
Yes, the original boxes are around 4-1/4 turns of the original size steering wheel. Sounds like your spindles are stopping your full range of steering.
__________________
72 C10 lwb fleetside -stock 350/350 combo |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
