the 72 K10 with no name (yet) thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brady01 · 07-20-2021, 08:24 PM

Been out of the truck game a little while but it feels good to be back. Bought this Blue 72 K10 that has traveled quite a long way from California. I've had a couple of c10s but I think me and my little boy (4 months old as I type this) will enjoy these mountain roads of North Ga in a k10. There isn't a straight panel on this truck as it has definitely been used (I was told on a ranch) but as far as rust it's actually a really solid truck. The plan is to get it running and driving well, fix up the interior, maybe some 15x8 steel wheels and caps, and drive the snot out of it.

Unfortunately, we haven't started our relationship out on the right foot as the truck needs more work than I was planning on ... I was sold the truck with a "fresh 350" that had junk in the carb. I was told if I would clean out the carb that I would have a "good running truck" .... Unfortunately, it's 2021 and the list of people you can trust is getting shorter every day.. Got home and pulled the tank, cleaned it out, replaced sending unit, and added a new Holley Carb to start the truck and hear a terrible exhaust leak.. No biggie.. fixed the exhaust leak and heard a terrible knocking from the engine... Not what I was hoping for.

I bought the truck without hearing it run from someone who I thought I could trust. I was wrong.

And it gets better.. Pulled the engine last Saturday to take to my builder to see if it was worth rebuilding or if a replacement would be my best option only to find out that my "fresh 350" was a 305 that had been bored .40 over!! The only thing fresh about the engine was the spray paint all over everything... So needless to say, a replacement is the route I'll be taking..

Don't buy a truck without hearing it run... You live and you learn.. I'm not mad that he did this to me, I'm mad at myself for falling for it. But I'm not going to let that stop me from enjoying this truck. So I ordered a brand new crate 290hp 350 from GM. Should be here in 2-3 days and I'll keep you all posted on the progress.

So far I pulled the rubber out of the floor and coated it with some paint just to clean it up. I do have a new rubber mat to go back in the floor with padding and sill plates.. Will also be changing the steering wheel soon..

Also need a name for this truck... Yall help me !

brady01 · 07-20-2021, 08:28 PM

Won't let me upload more pics.. Says a security token is missing... Ill try later.

brady01 · 07-20-2021, 08:29 PM

..

brady01 · 07-20-2021, 08:30 PM

Sorry for the sideways pics.. Just turn your head. LOL

brady01 · 07-20-2021, 08:32 PM

more pics

**raggedjim** · 07-20-2021, 11:24 PM

Bad deal on the motor, karma will get him back...

I like the truck overall though, good luck with the build, Rg

cj847 · 07-21-2021, 08:39 AM

Sorry about your motor.

When you put the new one in, the dipstick tube goes outside of the exhaust manifold.

brady01 · 07-21-2021, 10:34 AM

Quote:

Originally Posted by cj847

Sorry about your motor.

When you put the new one in, the dipstick tube goes outside of the exhaust manifold.

Didn't notice that until you pointed it out. This thing was so thrown together it wasn't even funny. Loose, missing bolts everywhere.. Definitely thrown together by someone in a hurry.

68Gold/white · 07-21-2021, 10:40 AM

You ordered the exact engine I would have ordered!!! Job well done!!!

brady01 · 07-21-2021, 11:09 AM

Quote:

Originally Posted by 68Gold/white

You ordered the exact engine I would have ordered!!! Job well done!!!

I got a brother who sells parts for GM so it saved me a little, but I like the truck too much to put a lesser engine in it. I would love to put a 6.0 in it, but I've been down that road and that's not in the plans for now. Lol

**landarts** · 07-21-2021, 08:38 PM

I think your truck will be a great one once you work through the issues. I believe a good title for the build thread is "Misrepresented". I have always tried to name my build threads from the obvious. Example one of my builds is called "68 Second Chance", this truck really deserved a second chance. Another one I did is called " 69 K10 from the field", that is where I found it in a field.

I am in for the ride on this one.

brady01 · 07-21-2021, 09:00 PM

Quote:

Originally Posted by landarts

I think your truck will be a great one once you work through the issues. I believe a good title for the build thread is "Misrepresented". I have always tried to name my build threads from the obvious. Example one of my builds is called "68 Second Chance", this truck really deserved a second chance. Another one I did is called " 69 K10 from the field", that is where I found it in a field.

I am in for the ride on this one.

I like it !

LT7A · 07-22-2021, 02:23 PM

Cool truck! So frustrating that people try to get away with stuff like that motor. You've got it headed in the right direction though. I would offer a play on Landarts name idea: Miss Represent. Started out being misrepresented and with the new motor and repairs, it will represent how cool these trucks can be even without doing a full restoration.

brady01 · 07-24-2021, 01:51 PM

Went and got the new engine today. Now to get it painted up and installed.. Anyone ever painted a new crate motor? Just clean it and spray it or should I scuff it first?

brady01 · 07-24-2021, 01:53 PM

Pics..

CG · 07-24-2021, 01:56 PM

Interested to hear more about your engine once its ready to take your truck down the road. Cost, dealer or jobber?

brady01 · 07-24-2021, 02:41 PM

Quote:

Originally Posted by CG

Interested to hear more about your engine once its ready to take your truck down the road. Cost, dealer or jobber?

I'm in it for around the 3k mark. 2 year 50k mile warranty.. 290hp 350. My brother works for GM so I think they helped me out a little...

**YellowK5** · 07-24-2021, 03:13 PM

Very cool old truck...What is the part number on that engine? I am thinkg I may get that for my 71

brady01 · 07-24-2021, 03:38 PM

Quote:

Originally Posted by YellowK5

Very cool old truck...What is the part number on that engine? I am thinkg I may get that for my 71

Part# 19421178

**IronCanine** · 07-24-2021, 03:47 PM

Subbed and down the road. My kind of truck.

brady01 · 07-24-2021, 04:03 PM

Quote:

Originally Posted by IronCanine

Subbed and down the road. My kind of truck.

Athens, GA... Go Dawgs !

brady01 · 07-28-2021, 12:01 PM

A little work in between tint jobs this morning..

**landarts** · 07-28-2021, 02:55 PM

Very nice! Get that thing installed and go for a ride, it will help motivate to keep chipping away.

brady01 · 07-30-2021, 01:47 PM

Quote:

Originally Posted by landarts

Very nice! Get that thing installed and go for a ride, it will help motivate to keep chipping away.

That's the plan!

brady01 · 07-31-2021, 07:24 PM

Slowly making progress ...

07-20-2021, 08:24 PM	#1
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	the 72 K10 with no name (yet) thread Been out of the truck game a little while but it feels good to be back. Bought this Blue 72 K10 that has traveled quite a long way from California. I've had a couple of c10s but I think me and my little boy (4 months old as I type this) will enjoy these mountain roads of North Ga in a k10. There isn't a straight panel on this truck as it has definitely been used (I was told on a ranch) but as far as rust it's actually a really solid truck. The plan is to get it running and driving well, fix up the interior, maybe some 15x8 steel wheels and caps, and drive the snot out of it. Unfortunately, we haven't started our relationship out on the right foot as the truck needs more work than I was planning on ... I was sold the truck with a "fresh 350" that had junk in the carb. I was told if I would clean out the carb that I would have a "good running truck" .... Unfortunately, it's 2021 and the list of people you can trust is getting shorter every day.. Got home and pulled the tank, cleaned it out, replaced sending unit, and added a new Holley Carb to start the truck and hear a terrible exhaust leak.. No biggie.. fixed the exhaust leak and heard a terrible knocking from the engine... Not what I was hoping for. I bought the truck without hearing it run from someone who I thought I could trust. I was wrong. And it gets better.. Pulled the engine last Saturday to take to my builder to see if it was worth rebuilding or if a replacement would be my best option only to find out that my "fresh 350" was a 305 that had been bored .40 over!! The only thing fresh about the engine was the spray paint all over everything... So needless to say, a replacement is the route I'll be taking.. Don't buy a truck without hearing it run... You live and you learn.. I'm not mad that he did this to me, I'm mad at myself for falling for it. But I'm not going to let that stop me from enjoying this truck. So I ordered a brand new crate 290hp 350 from GM. Should be here in 2-3 days and I'll keep you all posted on the progress. So far I pulled the rubber out of the floor and coated it with some paint just to clean it up. I do have a new rubber mat to go back in the floor with padding and sill plates.. Will also be changing the steering wheel soon.. Also need a name for this truck... Yall help me ! Attached Images

07-20-2021, 08:28 PM	#2
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread Won't let me upload more pics.. Says a security token is missing... Ill try later.

07-20-2021, 08:29 PM	#3
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread .. Attached Images

07-20-2021, 08:30 PM	#4
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread Sorry for the sideways pics.. Just turn your head. LOL Attached Images

07-20-2021, 08:32 PM	#5
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread more pics Attached Images

07-20-2021, 11:24 PM	#6
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,496	Re: the 72 K10 with no name (yet) thread Bad deal on the motor, karma will get him back... I like the truck overall though, good luck with the build, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

07-21-2021, 08:39 AM	#7
cj847 Registered User Join Date: Sep 2016 Location: Ozark, MO Posts: 573	Re: the 72 K10 with no name (yet) thread Sorry about your motor. When you put the new one in, the dipstick tube goes outside of the exhaust manifold.

07-21-2021, 10:40 AM	#9
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,409	Re: the 72 K10 with no name (yet) thread You ordered the exact engine I would have ordered!!! Job well done!!!

07-21-2021, 08:38 PM	#11
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,420	Re: the 72 K10 with no name (yet) thread I think your truck will be a great one once you work through the issues. I believe a good title for the build thread is "Misrepresented". I have always tried to name my build threads from the obvious. Example one of my builds is called "68 Second Chance", this truck really deserved a second chance. Another one I did is called " 69 K10 from the field", that is where I found it in a field. I am in for the ride on this one. __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

07-22-2021, 02:23 PM	#13
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,627	Re: the 72 K10 with no name (yet) thread Cool truck! So frustrating that people try to get away with stuff like that motor. You've got it headed in the right direction though. I would offer a play on Landarts name idea: Miss Represent. Started out being misrepresented and with the new motor and repairs, it will represent how cool these trucks can be even without doing a full restoration.

07-24-2021, 01:51 PM	#14
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread Went and got the new engine today. Now to get it painted up and installed.. Anyone ever painted a new crate motor? Just clean it and spray it or should I scuff it first?

07-24-2021, 01:53 PM	#15
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread Pics.. Attached Images

07-24-2021, 01:56 PM	#16
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,033	Re: the 72 K10 with no name (yet) thread Interested to hear more about your engine once its ready to take your truck down the road. Cost, dealer or jobber? __________________ … … … … … … … … ... … … … … … … … … … … …

07-24-2021, 03:13 PM	#18
YellowK5 Active Member Join Date: Jun 2021 Location: Rancho Cucamonga California Posts: 170	Re: the 72 K10 with no name (yet) thread Very cool old truck...What is the part number on that engine? I am thinkg I may get that for my 71

07-24-2021, 03:47 PM	#20
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,758	Re: the 72 K10 with no name (yet) thread Subbed and down the road. My kind of truck. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."



Register or Log In To remove these advertisements.

07-28-2021, 12:01 PM	#22
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread A little work in between tint jobs this morning.. Attached Images

07-28-2021, 02:55 PM	#23
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,420	Re: the 72 K10 with no name (yet) thread Very nice! Get that thing installed and go for a ride, it will help motivate to keep chipping away. __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

07-31-2021, 07:24 PM	#25
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: the 72 K10 with no name (yet) thread Slowly making progress ... Attached Images

Register or Log In To remove these advertisements.