AL Ho72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mongocanfly** · 08-26-2021, 02:08 PM

Is there any value to a 67 or 69 3/4 ton axle parts..I believe HO72..correct t me if I'm wrong..
The rear brake drums were bought new in the 80s from a Chevy dealership.. installed,, then sat in the barn ever since...they are rusted and would need turned, but have less than 1 mile on them..the brakes were never hooked up ..I pulled the diff cover and it's a open diff with I believe 4.57 gears...32 teeth on the ring gear...axles appear good as well...
Before I haul it off for scrap I thought I'd see if theres any interest
Also have the closed knuckle front from the same truck,, but it's still under a truck...
I'm sure shipping any of this heavy stuff may not make it worthwhile..

**Louisvillekytruck** · 08-26-2021, 02:39 PM

Do u have the ubolts and the lower and upper plates for it

**mongocanfly** · 08-26-2021, 02:43 PM

No, sorry...the u bolts left on the last load of scrap..the plates were used on another truck
A while back I was informed to never reuse the u bolts....although we've reused them for yrs

**Louisvillekytruck** · 08-26-2021, 02:47 PM

Greg pm you

08-26-2021, 02:08 PM	#1
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Ho72 Is there any value to a 67 or 69 3/4 ton axle parts..I believe HO72..correct t me if I'm wrong.. The rear brake drums were bought new in the 80s from a Chevy dealership.. installed,, then sat in the barn ever since...they are rusted and would need turned, but have less than 1 mile on them..the brakes were never hooked up ..I pulled the diff cover and it's a open diff with I believe 4.57 gears...32 teeth on the ring gear...axles appear good as well... Before I haul it off for scrap I thought I'd see if theres any interest Also have the closed knuckle front from the same truck,, but it's still under a truck... I'm sure shipping any of this heavy stuff may not make it worthwhile.. Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 08-26-2021 at 02:42 PM.

08-26-2021, 02:39 PM	#2
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,109	Re: Ho72 Do u have the ubolts and the lower and upper plates for it

08-26-2021, 02:43 PM	#3
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Ho72 No, sorry...the u bolts left on the last load of scrap..the plates were used on another truck A while back I was informed to never reuse the u bolts....although we've reused them for yrs __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

08-26-2021, 02:47 PM	#4
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,109	Re: Ho72 Greg pm you



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.