Lmc fan shroud fitting.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ellisjay2 · 12-09-2021, 02:53 PM

Should I trim my new shroud...it seems to have a gap and doesn't fit snuggly as oem.... otherwise I was just going to zip tie or make holes and just bolt down for stability.....it's the 2 piece shroud.

**Wgesnerjr** · 12-09-2021, 03:00 PM

My shroud and radiator are both original and mine does not fit well either.

JJH Jimmy · 12-09-2021, 03:01 PM

Are you sure you got the right shroud. I think there are 2 different radiator core sizes for a 350. The manual trans has a smaller core.

ellisjay2 · 12-09-2021, 07:58 PM

I forgot to mention this radiator is an aftermarket brand....my old radiator was bigger in dimensions..no big deal I just went ahead and trimmed edges to where it would seat down some...guess main thing is securing it down good to make the tunnel for fan suction.

Mattchu60 · 12-10-2021, 08:26 AM

I have found the aftermarket radiators don't fit exactly like the originals. I ordered a radiator for one of my trucks and it was 1/4" taller than the GM one, I found a way to make it fit. Also the rubber mounts would not fit, I had to carve them out slightly longer to get them over the radiator.

I ordered a 2nd radiator (exact same part number) 1 year later for another truck. This time it was the stock height but the core was thinner than the one previous one i bought. I still needed to carve out some rubber on the mounts to get it to fit.

12-09-2021, 02:53 PM	#1
ellisjay2 Registered User Join Date: Feb 2014 Location: marietta ga Posts: 147	Lmc fan shroud fitting.... Should I trim my new shroud...it seems to have a gap and doesn't fit snuggly as oem.... otherwise I was just going to zip tie or make holes and just bolt down for stability.....it's the 2 piece shroud. Attached Images __________________ : Eli540 86 gmc 2500 longbed Carb 5.7, rwd, 400 tranny.

12-09-2021, 03:00 PM	#2
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: Lmc fan shroud fitting.... My shroud and radiator are both original and mine does not fit well either. Attached Images __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

12-09-2021, 03:01 PM	#3
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 929	Re: Lmc fan shroud fitting.... Are you sure you got the right shroud. I think there are 2 different radiator core sizes for a 350. The manual trans has a smaller core. __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

12-09-2021, 07:58 PM	#4
ellisjay2 Registered User Join Date: Feb 2014 Location: marietta ga Posts: 147	Re: Lmc fan shroud fitting.... I forgot to mention this radiator is an aftermarket brand....my old radiator was bigger in dimensions..no big deal I just went ahead and trimmed edges to where it would seat down some...guess main thing is securing it down good to make the tunnel for fan suction. __________________ : Eli540 86 gmc 2500 longbed Carb 5.7, rwd, 400 tranny.

12-10-2021, 08:26 AM	#5
Mattchu60 Registered User Join Date: Jan 2014 Location: Swaledale, IA Posts: 485	Re: Lmc fan shroud fitting.... I have found the aftermarket radiators don't fit exactly like the originals. I ordered a radiator for one of my trucks and it was 1/4" taller than the GM one, I found a way to make it fit. Also the rubber mounts would not fit, I had to carve them out slightly longer to get them over the radiator. I ordered a 2nd radiator (exact same part number) 1 year later for another truck. This time it was the stock height but the core was thinner than the one previous one i bought. I still needed to carve out some rubber on the mounts to get it to fit.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.