TX Cleaning out storage

[bobvilla67]

Was planning on taking to swap meet but need to clear up space now. Left over parts from 67-72 Chevy Gmc trucks I’ve parted out over the years. Want to sell all in one lot. Some of the parts were in batches I sent to zinc plate. Not looking to sell individual parts. Probably not cost effective to ship. Located in Dallas.

Instrument clusters
Windshield washer brackets
Door handles
Am radios
Hood strikers
Steering column brackets
Engine stands
Auto trans crossmembers
Inner fender brackets
Taillight housings
Door latches and strikers
Accelerator brackets
Hood springs
Sway bar brackets
Radiator hold downs
Bumper brackets
Air cleaner spacers
Arm rests 68-71
Ash trays
Glovebox hinges
Door mirror backing plates.
$1500 for all including trailer

[nightmare]

if you do decide to split up, i would be interested in the upper radiator hold downs...

[MDFarms]

Yeh if you split up I may be interested in the steering column 2 filler plates that bolt in dash.

[D.PASSMORE]

Chrome W/P pully - interested.

[michael bustamante]

do you know if that bottom radio works?
what are you asking for the lot?

[bobvilla67]

Thanks for interest but don’t have time to sell and ship parts. I only have one day I get to mess with trucks.

[bobvilla67]

Truck bed trailer made from 67 GMC, has 6 lug leaf spring dana 44 under it. Will do $1500 for it all. I will give it till end of month and if no buyer for it all, will start splitting up.

[bobvilla67]

Way more not listed.

[bobvilla67]

Please no private messages about parts.

[CG]

Does the trailer have some sort of title and licensing? I know some states don't require that sort of thing for trailers of this type.

Ours does ... Thanks

[bobvilla67]

No title for it. Just made it to hold all the excess parts I have. Here in Texas, can title as homemade just need to get an empty weight on it. I didn’t really plan to use it but if I do, will get it titled.

Originally Posted by CG

Does the trailer have some sort of title and licensing? I know some states don't require that sort of thing for trailers of this type.

Ours does ... Thanks

Posted via Mobile Device

[bobvilla67]

Trailer and parts in bed are sold. Will sell the remaining parts separately or in smaller lots.

Windshield washer brackets 5 each Plated ones Sold
Hood strikers 5 each.
Engine stands have the v8 for $20 bucks and have some for the 292 for $80
Chrome Dana 44 cover 20
Inner fender brackets $2 each
Taillight housings 10 pair
Door latches and strikers 20 for complete set both doors-all Sold
Hood springs 10 pair
Sway bar brackets 20 for complete set
Radiator hold downs -sold pending payment
Bumper brackets $5 pair -all sold
Air cleaner spacers
Arm rests 68-71 $10 pair
Ash tray 5 each
Glovebox hinges
Door mirror backing plates $5 pair.
I will be going to Pate so can bring with me to save on shipping.
Anything else just ask. All prices plus ship usps priority shipping.
Posted via Mobile Device

[zicc1835]

Originally Posted by bobvilla67

Trailer and parts in bed are sold. Will sell the remaining parts separately or in smaller lots.

Windshield washer brackets 5 each Plated ones Sold
Hood strikers 5 each.
Engine stands have the v8 for $20 bucks and have some for the 292 for $80
Chrome Dana 44 cover 20
Inner fender brackets $2 each
Taillight housings 10 pair
Door latches and strikers 20 for complete set both doors-all Sold
Hood springs 10 pair
Sway bar brackets 20 for complete set
Radiator hold downs -sold pending payment
Bumper brackets $5 pair -all sold
Air cleaner spacers
Arm rests 68-71 $10 pair
Ash tray 5 each
Glovebox hinges
Door mirror backing plates $5 pair.
I will be going to Pate so can bring with me to save on shipping.
Anything else just ask. All prices plus ship usps priority shipping.
Posted via Mobile Device

the engine stands in post #12 on the end of the table by the diff cover are they SBC 67-72 flavor if so what do you want for them the other ones arrived today thank you

[CarlsLQ9SS]

Need a set of door latches and strikers, set of bumper brackets, a inner fender bracket, and mirror backing plates

[CarlsLQ9SS]

Radiator hold downs price?

[Accelo]

I will take Bumper brackets $5 pair. (I will take two pair)
I am assuming these are the small angle brackets that go on the frame?

Any shims you have for the door strikers I will take if you have them.

I will also take the power brake support bracket.

[1moretruck]

I would be interested in the transfer case shifter boot ring pictured, and a set of door latches and strikers. just let me know a total with shipping and how to pay.

[bobvilla67]

Carl. Let me verify I have the latches. I don’t see them in pics, just the strikers. I will 10 for radiator hold downs. Believe they are 3 core.

Accelo - believe only have the top bumper brackets, I only have one set if Carl takes the other. How does 5 sound for the bracket? Will see on the shims if others don’t need them with strikers.

One more truck- I’ll take 5 for the ring. I’m not certain if have the latches only the strikers.

I am on the way to the shop to box up and verify on latches.

Thanks

[CarlsLQ9SS]

Ok, let me know on the latches, and I’ll take the radiator brackets too.

[1moretruck]

I will take the ring and all of the plated strikers you have left, as well as all the plated washer bottle brackets you have.

[bobvilla67]

Carl. Only have the strikers. No latches. Do you still want just the strikers? And which mirror backing plates, rectangle or roundish ones? Total shipped with pp fees. $59.36

Accelo -only have one other set of brackets. With pb booster brace. $19

1more truck- 3 washer brackets , 2 sets of strikers , t case ring $77.90

PayPal: bobvilla@sbcglobal.net

[1moretruck]

Payment sent

[Accelo]

Accelo - believe only have the top bumper brackets, I only have one set if Carl takes the other. How does 5 sound for the bracket? Will see on the shims if others don’t need them with strikers.
Pricing for the brackest is fine. Let me know if you have any shims.'
Thanks
Accelo

[CarlsLQ9SS]

I need the 71-72 style mirror brackets, and I’ll pass on the strikers and door latches. Let me know the shipped price.
Thanks, Carl

[bobvilla67]

Originally Posted by CarlsLQ9SS

I need the 71-72 style mirror brackets, and I’ll pass on the strikers and door latches. Let me know the shipped price.
Thanks, Carl

Carl-$39 total.

1moretruck - will be sending out yours this morning. Did you want me throw in the other set of door strikers since Carl passed on them?

Accelo- I will keep digging to see about the shims.

Thanks
Posted via Mobile Device