Dana 44 Closed Knuckle to 10 bolt GM Corporate swap question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ssjody · 05-24-2022, 08:53 AM

I'm swapping my 1968 K20 Dana 44 Closed Knuckle front axle assembly out for a 1974 K20 10 Bolt GM Corporate front axle assembly. Just looking at the Pinion Yoke and it looks like the two are different. The U bolts that hold the U-Joint in look like they will need to be longer (I haven't tried yet, just and observation). Do I just buy a new U-Joint with the U-Bolts for the '74 to solve the problem?

**kwmech** · 05-24-2022, 09:31 AM

1974 will still be a dana 44 unless you meant an 84. Either way, 10 bolt yokes used a strap kit instead of u-bolts

ssjody · 05-25-2022, 06:43 AM

Quote:

Originally Posted by kwmech

1974 will still be a dana 44 unless you meant an 84. Either way, 10 bolt yokes used a strap kit instead of u-bolts

Thanks for the info. Will the front universal fit the 10 bolt yoke or is it different?

**special-K** · 05-25-2022, 08:52 AM

Is it a 10-bolt front end you are swapping in? Both the 10-bolt and Dana44 would bolt up the same. I think I recall the earlier Dana driveshafts (pre-double cardon) having different type yokes. Does yours have the u-bolts with nuts over the caps, as opposed to straps with bolts?

ssjody · 05-25-2022, 03:50 PM

Quote:

Originally Posted by special-K

Is it a 10-bolt front end you are swapping in? Both the 10-bolt and Dana44 would bolt up the same. I think I recall the earlier Dana driveshafts (pre-double cardon) having different type yokes. Does yours have the u-bolts with nuts over the caps, as opposed to straps with bolts?

Yes, I'm bolting the 10 bolt in to replace the Dana 44. My Dana 44 has the u-bolts and the 10 bolt uses straps with bolts.

**special-K** · 05-25-2022, 07:54 PM

I believe you can swap the yokes, but never did cross that bridge.

05-24-2022, 08:53 AM	#1
ssjody Registered User Join Date: Jul 2014 Location: Union, KY Posts: 33	Dana 44 Closed Knuckle to 10 bolt GM Corporate swap question I'm swapping my 1968 K20 Dana 44 Closed Knuckle front axle assembly out for a 1974 K20 10 Bolt GM Corporate front axle assembly. Just looking at the Pinion Yoke and it looks like the two are different. The U bolts that hold the U-Joint in look like they will need to be longer (I haven't tried yet, just and observation). Do I just buy a new U-Joint with the U-Bolts for the '74 to solve the problem?

05-24-2022, 09:31 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Dana 44 Closed Knuckle to 10 bolt GM Corporate swap question 1974 will still be a dana 44 unless you meant an 84. Either way, 10 bolt yokes used a strap kit instead of u-bolts

05-25-2022, 08:52 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Dana 44 Closed Knuckle to 10 bolt GM Corporate swap question Is it a 10-bolt front end you are swapping in? Both the 10-bolt and Dana44 would bolt up the same. I think I recall the earlier Dana driveshafts (pre-double cardon) having different type yokes. Does yours have the u-bolts with nuts over the caps, as opposed to straps with bolts? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-25-2022, 07:54 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Dana 44 Closed Knuckle to 10 bolt GM Corporate swap question I believe you can swap the yokes, but never did cross that bridge. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.