|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-31-2022, 02:27 PM
|
#1 |
|
Registered User
Join Date: Jan 2018
Location: Danville, IL
Posts: 160
|
Booster to proportioning valve (combo valve) line size
I am setting up my disc/drum master/booster/combo valve and am getting ready to make the lines that go to from my master to my proportioning valve...My valve is located in my frame rail so my lines from the booster to this valve are a little longer than most...the master has 2 different size ports, forward most port 1/2 and port closest to firewall is 9/16. The combo valve has 2 different size ports for the lines coming from the master as well...1/2 in front and 7/16 in rear on valve....Cpl questions i hope someone can straighten me out on....#1...line size, do i need 3/16 or 1/4 line going between master and combo valve? #2 does it hook up front to front , rear to rear or ?
|
|
|
|
05-31-2022, 05:07 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Booster to proportioning valve (combo valve) line size
Here's some good info with very good pictures - http://67-72chevytrucks.com/vboard/s...d.php?t=616493
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
