1965 283 pulley setup for pwr steering conversion

[DoubleL]

So I want to convert to pwr steering. Stock 283 on a 1965 C20. I have a single pulley on the crank and water pump. I have someone with a power steering box, pump and a dual crank pulley. Howoever these are for a long neck water pump and I believe mine is a short neck. What is the easiest way to set this up for a power sterring conversion? Thank again for your help guys!

[MikeN]

I got pulleys and brackets from these guys for both my 65 Impala and 64 C10;

http://www.alangrovecomponents.com/

Both of my vehicles are small block Chevy's with short water pumps, and I got pulleys & brackets for both alternator and power steering. The Alan Grove stuff is great quality.

[DoubleL]

Originally Posted by MikeN

I got pulleys and brackets from these guys for both my 65 Impala and 64 C10;

http://www.alangrovecomponents.com/

Both of my vehicles are small block Chevy's with short water pumps, and I got pulleys & brackets for both alternator and power steering. The Alan Grove stuff is great quality.

Those look like they are a good solution. Thank you! Do you have dual pulleys on the water pump and crank?